Speedster Flying Scale Model Airplane
Speedster Flying Scale Model Airplane
 |
No items matching your keywords were found.
_________________________________________________________________________________
|
|
RC Airplane Scale Pilot Model #1 $19.95 This pre-painted scale model pilot is design for arf rc planes. It is made out of light plastic material. |
|
|
Scale RC Airplane Pilot #2 $19.95 This pre-painted scale model pilot is design for arf rc planes. It is made out of light plastic material. |
|
|
RC Model Airplane #6 $19.95 This pre-painted scale model pilot is design for arf rc planes. It is made out of light plastic material. |
|
|
4-CHANNEL EP-Powered AT-6 Texan RC AIRPLANE Model Kit (Unassembled) $49.95 Features: 4 Channel Remote Control Airplane Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible Constructed with Super Tough, lightweight EPO material! Perfect appearance and emulation (Scale appearance, great attention has been given to details) True Classic Trainer of All Time! Decorative Waterslide Decals! Easy to Build & Endless Fun to Fly! Perfect Low-Wing Trainer! Rudder helps steer plane on ground on its scale landing gear for easy take off Shock Resistant Reinforced fuselage and Strong Wings Can Take Off From Ground or Hand Launched Ground Take-Off can be performed easily Huge Wing size, Excellent Flight Performance Super easy and super stable electric powered scale R/C park flyer for beginner or middle-level users Stable inverted flight Super stable for beginner, Super low speed for safety, Super low altitude for fun Fabricated by accurate molds with high fidelity of real airplane Excellent stability and aerobatic capability Detailed Body Structure High roll rate Super low speed for safety, Super low altitude for fun Crash Resistant Construction Easy to Fly, Easy to Control, Super stable for beginner Slow Speed Flying Capable, Good for Beginner Suitable for both beginners and experienced pilots Specifications: Wingspan: 900mm (35.4") Length: 680mm (26.7") Flying Weight: 480g (16.9 oz) Requirements: Drive System: 370 carbon brushed motor Servo: 3X 9g high speed micro servos ESC: 20A speed controller Battery: 9.6V 650mah Ni-MH Control system: 4 CH Multifunctional Radio Transmitter and Receiver Included: Airplane Kit Unassembled Screw Driver 4 Propellers English Manual |
|
|
Scale RC Airplane Woman Pilot #3 $19.95 This pre-painted scale model pilot is design for arf rc planes. It is made out of light plastic material. |
|
|
NitroModels Zero Fighter 52 - 54" Scale Nitro Gas Radio Remote Control Warbird Airplane $99 Japan's Zero Fighter 50 Nitro Gas ARF Model RC Airplane The Mitsubishi A6M5 is a great scale airplane for anyone who likes scale flying. The kit includes a fiberglass fuselage and cowling. The wings are built with balsa material to form internal structure and covered. All covered surfaces are done in solartex cloth covering and then the whole airplane is airbrushed. All control surfaces have beveled leading edges and the control horn mounts are preinstalled. The wing is complete with CA hinges. The leading edge of the wing is pre-shaped. The kit includes full color decals. Wing span: 54 in / 1380mm Wing area: 543 sq in / 35 sq dm Flying weight: 6.1lb / 2800g Fuselage length: 45 in / 1140 mm Engine Required: 2c 0.46 cu in Radio Required: 4 channels,5 servos 4c 0.63 cu in or 5 channels,6 servos Top quality wood construction with fiberglass fuselage Comes with all hardware and accessories The Mitsubishi A6M was a light-weight naval fighter aircraft employed by the Japanese from 1940-45. More widely known by its Navy designation, Type 0 Carrier Fighter, or Zero, the plane gained a legendary reputation. A combination of excellent maneuverability and very long range made it one of the best fighters of its era. The most effective Japanese fighter of World War II was known by many names. To the Imperial Japanese Navy, it was the Type 0 Carrier Fighter, Model 52. To the U.S. Navy pilots who fought it in the skies over the Pacific, it was the "Zeke." And to the American public it was known as the Zero. By whatever name, the Imperial Japanese Navy's Zero fighter was one of the most potent warplanes of World War II and probably the best all-around carrier-based fighter of the early 1940s. The Zero's outstanding performance stemmed primarily from the fact that it weighed only 5,500 to 6,500 pounds fully loaded. For this reason the Zero was extremely maneuverable and had a fast rate of climb. At the time of its appearance in 1940, the Zero fighter has a performance package superior to any other naval aircraft in the world. Speed, range, rate of climb, maneuverability and the ability to operate from aircraft carrier decks combined to forge a seemingly invincible weapon in the hands of the Japanese Navy. In the six months after Pearl Harbor, the Sentais (fighter Groups) equipped with the A6M so dominated the sky that the Imperial Forces had conquered over 12 million square miles. Over 10,000 Rei-sen (Zero) fighters were produced by the Japanese, and it is interesting to note that that the Zero weighted only 50% of the Corsair, one of the reasons being the lack of armor plate protection for |
|
|
Zero Fighter 52 - 54" Scale Nitro Gas Remote Control Airplane ARF Balsa Plane $199.95 New Page 1 Japan's Zero Fighter 50 Nitro Gas ARF Model RC Airplane The Mitsubishi A6M5 is a great scale airplane for anyone who likes scale flying. The kit includes a fiberglass fuselage and cowling. The wings are built with balsa material to form internal structure and covered. All covered surfaces are done in solartex cloth covering and then the whole airplane is airbrushed. All control surfaces have beveled leading edges and the control horn mounts are preinstalled. The wing is complete with CA hinges. The leading edge of the wing is pre-shaped. The kit includes full color decals. Wing span: 54 in / 1380mm Wing area: 543 sq in / 35 sq dm Flying weight: 6.1lb / 2800g Fuselage length: 45 in / 1140 mm Engine Required: 2c 0.46 cu in Radio Required: 4 channels,5 servos 4c 0.63 cu in or 5 channels,6 servos Top quality wood construction with fiberglass fuselage Comes with all hardware and accessories The Mitsubishi A6M was a light-weight naval fighter aircraft employed by the Japanese from 1940-45. More widely known by its Navy designation, Type 0 Carrier Fighter, or Zero, the plane gained a legendary reputation. A combination of excellent maneuverability and very long range made it one of the best fighters of its era. The most effective Japanese fighter of World War II was known by many names. To the Imperial Japanese Navy, it was the Type 0 Carrier Fighter, Model 52. To the U.S. Navy pilots who fought it in the skies over the Pacific, it was the "Zeke." And to the American public it was known as the Zero. By whatever name, the Imperial Japanese Navy's Zero fighter was one of the most potent warplanes of World War II and probably the best all-around carrier-based fighter of the early 1940s. The Zero's outstanding performance stemmed primarily from the fact that it weighed only 5,500 to 6,500 pounds fully loaded. For this reason the Zero was extremely maneuverable and had a fast rate of climb. At the time of its appearance in 1940, the Zero fighter has a performance package superior to any other naval aircraft in the world. Speed, range, rate of climb, maneuverability and the ability to operate from aircraft carrier decks combined to forge a seemingly invincible weapon in the hands of the Japanese Navy. In the six months after Pearl Harbor, the Sentais (fighter Groups) equipped with the A6M so dominated the sky that the Imperial Forces had conquered over 12 million square miles. Over 10,000 Rei-sen (Zero) fighters were produced by the Japanese, and it is interesting to note that that the Zero weighted only 50% of the Corsair, one of the reasons being the lack of armor plate |
|
|
Tail Wing for Flying Dragon RC 3CH Airplane $4 Tail Wing for Flying Dragon RC 3CH Airplane |
|
|
4-Channel Electric Powered AT-6 Texan (Silver) RC Airplane Model Kit (Unassembled) $49.95 Features: 4 Channel Remote Control Airplane Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible Constructed with Super Tough, lightweight EPO material! Perfect appearance and emulation (Scale appearance, great attention has been given to details) True Classic Trainer of All Time! Decorative Waterslide Decals! Easy to Build & Endless Fun to Fly! Perfect Low-Wing Trainer! Rudder helps steer plane on ground on its scale landing gear for easy take off Shock Resistant Reinforced fuselage and Strong Wings Can Take Off From Ground or Hand Launched Ground Take-Off can be performed easily Huge Wing size, Excellent Flight Performance Super easy and super stable electric powered scale R/C park flyer for beginner or middle-level users Stable inverted flight Super stable for beginner, Super low speed for safety, Super low altitude for fun Fabricated by accurate molds with high fidelity of real airplane Excellent stability and aerobatic capability Detailed Body Structure High roll rate Super low speed for safety, Super low altitude for fun Crash Resistant Construction Easy to Fly, Easy to Control, Super stable for beginner Slow Speed Flying Capable, Good for Beginner Suitable for both beginners and experienced pilots Specifications: Wingspan: 900mm (35.4") Length: 680mm (26.7") Flying Weight: 480g (16.9 oz) Requirements: Drive System: 370 carbon brushed motor Servo: 3X 9g high speed micro servos ESC: 20A speed controller Battery: 9.6V 650mah Ni-MH Control system: 4 CH Multifunctional Radio Transmitter and Receiver Included: Airplane Kit Unassembled Screw Driver 4 Propellers English Manual |
|
|
Gas Rc Airplane Trainer $199.99 Brand New, Almost-Ready-To-Fly Nitro Gas R/C Airplane !!! The most popular Nitro Trainer 20 Airplane. Engine and Radio are not included Features Scale aerobatics models airplane Top quality balsa and plywood construction Covered with iron-on covering film 3D transparent template to assist engine installation Comes with all hardware and accessories Specifications Wing Span: 52.0 in / 1320 mm Wing Area: 446 sq in / 28.8 sq dm Flying Weight: 3.5 lbs / 1600 g Fuselage Length: 38.6 in / 980 mm Engine Required: 2c 0.25 cu in Radio Required: 4 channels, 4 servos |
|
|
The New 2009 Model 4 Channel Warbird F4U Corsair RTF RC Ready to Fly Electric Airplane $84.95 4 Channel Full Function Radio Controlled (Aileron,Elevator,Rudder,Throttle) Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible Constructed with Super Tough, lightweight EPO material! Perfect appearance and emulation (Scale appearance, great attention has been given to details) True Classic Trainer of All Time! Decorative Waterslide Decals! Easy to Build & Endless Fun to Fly! Perfect Low-Wing Trainer! Rudder helps steer plane on ground on its scale landing gear for easy take off Ready to Fly in Just Minutes! Shock Resistant Reinforced fuselage and Strong Wings Can Take Off From Ground or Hand Launched Ground Take-Off can be performed easily Huge Wing size, Excellent Flight Performance Super easy and super stable electric powered scale R/C park flyer for beginner or middle-level users Stable inverted flight fuselage with pre-installed Electronics, Motor, Servos, and Speed Controller Super stable for beginner, Super low speed for safety, Super low altitude for fun Fabricated by accurate molds with high fidelity of real airplane Powerful 370 motor with expert-designed propellers and hi-capacity Ni-MH battery pack Excellent stability and aerobatic capability Detailed Body Structure High roll rate Digital Proportional Motor Speed Control Super low speed for safety, Super low altitude for fun Crash Resistant Construction Easy to Fly, Easy to Control, Super stable for beginner Slow Speed Flying Capable, Good for Beginner Suitable for both beginners and experienced pilots Wingspan: 840mm (33") Length: 750mm (29.5") Flying Weight: 420g (14.8 oz) Drive System: 370 carbon brushed motor Servo: 3X 9g high speed micro servos ESC: 20A speed controller Battery: 9.6V 650mah Ni-MH Control system: 4 CH Multifunctional Radio Transmitter and Receiver Radio Control Range: 1000 feet (300m) Airplane (90% assembled) 4 Channel Multifunctional Radio Transmitter Wall Battery Charger High Quality Rechargeable 9.6V 650mah Ni-MH Battery English Manual 4 Propellers |
|
|
The New 2009 Model 4 Channel Warbird F4U Corsair RTF RC Ready to Fly Electric Airplane Gray Version $84.95 4 Channel Full Function Radio Controlled (Aileron,Elevator,Rudder,Throttle) Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible Constructed with Super Tough, lightweight EPO material! Perfect appearance and emulation (Scale appearance, great attention has been given to details) True Classic Trainer of All Time! Decorative Waterslide Decals! Easy to Build & Endless Fun to Fly! Perfect Low-Wing Trainer! Rudder helps steer plane on ground on its scale landing gear for easy take off Ready to Fly in Just Minutes! Shock Resistant Reinforced fuselage and Strong Wings Can Take Off From Ground or Hand Launched Ground Take-Off can be performed easily Huge Wing size, Excellent Flight Performance Super easy and super stable electric powered scale R/C park flyer for beginner or middle-level users Stable inverted flight fuselage with pre-installed Electronics, Motor, Servos, and Speed Controller Super stable for beginner, Super low speed for safety, Super low altitude for fun Fabricated by accurate molds with high fidelity of real airplane Powerful 370 motor with expert-designed propellers and hi-capacity Ni-MH battery pack Excellent stability and aerobatic capability Detailed Body Structure High roll rate Digital Proportional Motor Speed Control Super low speed for safety, Super low altitude for fun Crash Resistant Construction Easy to Fly, Easy to Control, Super stable for beginner Slow Speed Flying Capable, Good for Beginner Suitable for both beginners and experienced pilots Wingspan: 840mm (33") Length: 750mm (29.5") Flying Weight: 420g (14.8 oz) Drive System: 370 carbon brushed motor Servo: 3X 9g high speed micro servos ESC: 20A speed controller Battery: 9.6V 650mah Ni-MH Control system: 4 CH Multifunctional Radio Transmitter and Receiver Radio Control Range: 1000 feet (300m) Airplane (90% assembled) 4 Channel Multifunctional Radio Transmitter Wall Battery Charger High Quality Rechargeable 9.6V 650mah Ni-MH Battery English Manual Screw Driver |
|
|
T-34 MENTOR 60 Almost Ready To Fly (ARF) Gas Rc Airplane $349.99 T-34 MENTOR 60 Almost-Ready-To-Fly Nitro Gas RC Airplane! This airplane is huge. All you need is an engine and a radio. Engine and Radio are not included Features Semi-scale aerobatics trainer Top quality balsa and plywood construction Covered with iron-on covering film Built-up wing and two pre-painted pilot figures Special races have been organized based on this model Perfect for beginners who have graduated from shoulder wing trainer Comes with all hardware and accessories Specifications Wing Span: 65.2 in / 1650 mm Wing Area: 769 sq in / 49.6 sq dm Flying Weight: 7.9 lbs / 3600 g Fuselage Length: 54.0 in / 1370 mm Engine Required: 2c 0.60 cu in 4c 0.91 cu in Radio Required: 5 channels, 6 servos |
|
|
DeHavilland Mosquito Twin 25~32 - 73" Engine Powered Radio Remote Controlled Nitro Gas Scale Airplane ARF $489 CMP DeHavviland Mosquito 25~32 - 73" Nitro Gas Radio Remote Controlled Twin Engine Scale RC Warbird Airplane. The 73" Mosquito ARF is a great scale airplane for anyone who likes scale flying. The kit includes a fiberglass fuselage, center section, and cowling done in matching paint. The wings are sheeted foam, covered with solartex, painted to match. All control surfaces have beveled leading edges and the control horn mounts are preinstalled. The kit includes full color decals. The kit box is large, with all the major parts well packed in a light foam wrap and clear plastic bags. Slots in the interior cardboard held all items tightly in place, producing a sample of this product for review that will produce no damage from shipping. Included with the kit are 8-ounce fuel tanks, engine mounts, wheels, hardware, pushrods, clear plastic canopy and nose cone, decal sheet, one-piece fiberglass cowls, and fixed wire landing gear. You will need to purchase some building supplies, engines, spinners, servo extensions, and a radio. Mechanical retracts are an interesting option to consider. The quality of the materials is excellent with a one-piece fiberglass fuselage/fin straight and true. The 11-page instruction manual has excellent-quality step-by-step drawings. Pluses: ? Well engineered?all parts fit together nicely. ? Handsome painted finish and full-color decal sheet. Details and Recommendations: Type: Semiscale ARF Pilot Skill Level: Intermediate Wingspan: 73 inches Wing area: 1,286.5 square inches Length: 52.5 inches Weight: 11-11.5 pounds Wing loading: 20.6 ounces per square inch Engine: .25-.32 (two-stroke) or .26-.30 (four-stroke) Radio: Five- to six-channel transmitter, seven to nine servos (rudder, elevator, flaps, one for each aileron, one for each throttle, one for each optional retract) Construction: Molded fiberglass fuselage, tail sections, wing center-section, and engine nacelles with light-plywood support, balsa-and-plywood wing panels and sections Covering/finish: Three-color flat-finished camouflage paint over fiberglass, film covered wings and tail Options: Retractable landing gear (Not Included) Construction: Model assembly begins with attaching the ailerons to the wings using cloth-style hinges provided in the kit. The engine nacelle splits the flaps on each wing panel, which are connected with a U-shaped joiner wire. The flaps are attached after the wing sections are joined, to make their alignment easier to match. The wing is composed of a center-section and two outer panels. The outer panels and control surfaces are built-up wooden structures, and the center-section is a fiberglass shell with a plywood skeleton. Two aluminum tubes?measuring 87/16 inches in length and 3/4 inch in diameter?insta |
|
|
DeHavilland Mosquito Twin Engine 25~32 - 73" Nitro Powered Radio Remote Controlled Nitro Gas Scale Airplane ARF $499 Many of this model’s attributes attracted me to it, including the sweet sound of twin engines, extreme good looks, reputation for speed, scale outline, ease of assembly, and competitive price. This is one of those models I just had to begin as soon as I got it, and I’m sure it will have the same effect on you. The Mosquito is a top-quality ARF that ought to be on your buy list. You will not be disappointed and you will be the envy at your flying field. The 73" Mosquito ARF is a great scale airplane for anyone who likes scale flying. The kit includes a fiberglass fuselage, center section, and cowling done in matching paint. The wings are sheeted foam, covered with solartex, and painted to match. All control surfaces have beveled leading edges and the control horn mounts are preinstalled. The kit includes full color decals. Wing Span: 73"Weight: 11.01lbLength: 52.5"Wing Loading: 30.92oz./sq.ft.Wing Area: 821.5sq.inEngine Required: (2) 2c 25~32, 4c 26~30Radio 5~6 Channel 7~9 Servos Out of the box: As all CMP this kit comes with all parts nicely wrapped in thin foam and plastic bags. Wing is 3 piece design, outer panels are all wood, sheeted rib design. Center section is combination of laser-cut wood ribs and fiberglass shell making it very strong base for twin engine and landing gear mounting. Ailerons and flaps are hinged and installed. Tail section is air foiled surfaces hinged and ready. Fuselage is very strong with servo tray installed for you. Beautiful fiberglass cowls and engine hatches, painted PVC canopy and fairings. Wheels, gas tank, motor mount compliments complete hardware package. Kit comes with fixed gear option, mechanical retracts can be installed and wing is designed for it. Decal sheet is included to finish the models look. Due to twin engine set-up, experience is required to assemble and fly this Warbird. One of the reasons you looked at this models is its history and unique appearance. Sound of twin engine and scale looks is what this is all about. Get one today and fly after short assembly period. You will love the attention this plane will get! Details Type: Semiscale ARF Pilot Skill Level: IntermediateWingspan: 73 inches Wing area: 1,286.5 square inches Length: 52.5 inches Weight: 11-11.5 pounds Wing loading: 20.6 ounces per square inch Engine: .25-.32 (two-stroke) or .26-.30 (four-stroke) Radio: Five- to six-channel transmitter, seven to nine servos (rudder, elevator, flaps, one for each aileron, one for each throttle, one for each optional retract) Construction: Molded fiberglass fuselage, tail sections, wing center-section, and engine nacelles with light-plywood support, balsa-and-plywood wing panels and sections Covering/finish: Three-color flat-finished camouflage paint over fiberglass, film covered wings and tail Options: R |
|
|
Dash 8 B-500 RC Airplane 1/36 Scale w/ Remote Control $74.95 Spread your wings, wind up your engines and it's time to soar through the skies! You don't need a crash course in flying nor a license to fly. Explore the limitless airspace with these great radio-control aircrafts! Very easy to use and lots of fun! The airplane features a remote controlled, battery-powered propeller for extended flights. The remote will switch off the engine and let your high-flying glider adventure begin. Need more altitude? Flip the switch on the controller and the propeller fires up to help you climb again. Master banking turns and flying in different wind conditions as you carefully hone your skills. Recommended for ages 10 and above. Order Toll Free 1-800-350-5420 Have Questions? Please e-mail us at Info@TrendTimes.com The Plane can run to the runway, Accelerate to a speed high enough for takeoff, and take off from the ground. It can also run back to the player after landing. FEATURES: The Airplanes wing span is 750mm Length: 610 mm Twin Propellers Maximum Operating Range 150M 2 Speed Selectable Control Altitude & Rotor Speed Control Auto acceleration and takeoff (Very few planes have this feature!) The airplanes include: Brand New R/C Airplane ?? 2 ch - Full Function controller 2 Motors 4 Propellers 9.6 Volt Ni-MH Cell Battery Pack with Charger Manual |
|
|
421 Scale RC Aircraft Twin-Engine 46 - 71" Nitro/Electric Powered Remote Control Airplane ARF $499.95 421 Twin Engine Fuel/Electric-Powered Radio Controlled RC Plane ARF Wing Span: 71in / 1800mm Wing Area: 763 sq.in / 49.5 sq.dm Flying Weight: 11.0 lbs /5000g Fuselage Length: 62.6in / 1590mm Engine Required: 2c :0.40-0.46 x2 Radio Required: 6 channels ; 10-11 servos What the Pro says (More reviews here) The quality and engineering is excellent. It goes together VERY fast, far and away the fastest twin to build I have ever done. Everything fits perfectly, and the level of prefabrication is very high. The instructions are English and decent. It comes with fixed gear, and it's set up for retracts, too. I am waiting on a set of Robart air retracts to complete my plane. Mechanical retracts could be done, with a little engineering on your part.I am using two each of Exceed Monster Power 46 outrunners, Volcano 80A Escs, and Fusion Power 3200 5s lipos. The servos are all T-Pro SG5010 standard servos. I have used a bunch of them before with no issues, they are quite a bargain. Normally, on a plane this size, which will end up at least 10 pounds, I'd use something stronger on the elevators, but this plane is set up with two elevator servos, so standard servos are just fine. I will be using a seperate UBEC on one of the batteries to power the radio. Actually, maybe two of them. On previous large twins like the B25, P82, and Mosquito, I have used 5000mah packs, but long flights of 10 minutes or so have left me landing with over half the battery still left, so this time, I went with 3200, should be plenty. The nacelles are each one large fiberglass piece. This makes access to the interior very easy. If you wanted to, it would be easy enough to cut off the cowl portions to make them seperate. What engines will fit? It is set up for two 40s, I think four strokes should go in without any real problem, too. With my electrics, I made up my own plywood box motor mounts, but nice nylon mounts and good quality fuel tanks and tubing are all included in the kit, if you want to go glow. Did I mention how nice the glasswork and paint are? Along with all the woodwork and covering? Nice quality, and LIGHT. Oh...and you can't tell from the pictures, but it includes split flaps, too. I swapped out a few pieces of hardware along the way...what is included is good quality, but I don't like using EZ connectors on flight controls, so I soldered threaded couplers onto my elevator and rudder pushrods and added clevises instead. The rest of the hardware all got used. There is a nice set of decals(stickers) included. Not sure what of them I will use, I want to make mine a little different from the box top. Anyway...so far...delighted! Many pleasant surprises with this model. More from the Pro NitroModels keeps growing and learning, it really |
|
|
Main Body Fuselage for 3-Ch Flying Dragon RC Airplane $10 Main Body Fuselage for 3-Ch Flying Dragon RC Airplane |
|
|
Mitsubishi A6M5 52 Zero Fighter - 120 Fiberglass Radio Controlled 120 Engine Powered Scale Airplane 71" ARF $399 The Mitsubishi A6M5 is a great scale airplane for anyone who likes scale flying. The kit includes a fiberglass fuselage and cowling. The wings are sheeted foam and covered. All covered surfaces are done in solartex cloth covering and then the whole airplane is airbrushed. All control surfaces have beveled leading edges and the control horn mounts are preinstalled. The wing is complete with CA hinges. The leading edge of the wing is pre-shaped. The kit includes full color decals. *RETRACT NOTE* The retract bays are built into the wing from the factory, so the retracts will drop right in. ****************NOTE*************** Engine, servos, transmitter, and other electronic items are sold separately! This is an airplane kit only, no electronics! Assembly required. Due to the United States Post Office's International shipping size limit, we can not ship this item outside of the United States, except Canada. |
|
|
New English Blue J-3 Piper Cub 60 - 71" Nitro Gas Radio Remote Control Airplane Almost-Ready-to-Fly ARF $249 Super J-3 Piper Cub 60 - 71" ARF Scale Nitro Gas Radio Remote Control Airplane! A favorite with scale model builders, the Cub is now available with an unique "computer design and drawn" engineering, resulting in outstanding scale accuracy and easy kit assembly. This All-New Nitro Gas RC Super Cub ARF Blue J3 Piper Cub 60 makes for a perfect afternoon at the park! Made with lightweight, yet strong balsa construction, the stable flight characteristics make this a perfect airplane for the ARF fans, scale wing struts add to the appeal of this great looking airplane. Specs: Wing span: 71.5 in / 1820mm Fuselage Length: 46.5 in / 1180 mm Wing Area: 775 sq in / 50 sq dm Flying Weight: 5.6 lb / 2550 g User Requirements: Engine Required: 4c 0.52 - .60 cu in Radio Required: 4 channels, 5 servos FEATURES: Nearly all balsa construction already pre-covered. Includes all hardware parts and instruction manual. Exact scale outline is taken from original Piper 3-view drawing The All-New English Blue J-3 Piper Cub Radio Remote Control Airplane. Very adorable 40-60 class Piper J-3 Cub Piper Cub which reproduces the full-scale aircraft with amazing accuracy, using precise CAD engineering and data from original airplane. All balsa construction. Aluminum alloy framed cowl. Superb realism and build quality. All major components ready for immediate assembly. Almost Redy to Fly J-3 Piper Cub 60 |
|
|
|
Great Planes Z526 Zlin Akrobat GP/EP ARF
December 3rd, 2009 in
Model Airplanes