RC Wright Flyer Electrifly
RC Wright Flyer Electrifly
 |
No items matching your keywords were found.
_________________________________________________________________________________
|
|
7G Micro RC Servo $39.95 Specs Type: Sub-Micro, High-Speed and High-Torque Torque: 17.2 oz/in (1.17 kg. cm) @ 4.8V Speed: .12 sec/60 deg @ 4.8V Dimensions (WxLxH): (L x W x H): .90 x .45 x .94 in (23 x 12 24mm) Weight: .26 oz (7.5 g) Motor Type: Coreless Connector Type: Universal Application: Electric slow flyer to park flyer 3D airplanes, micro to mini electric helicopters and 1/18th scale onroad and offroad vehicles Voltage: 4.8-5.3V DC |
|
|
300DF Outrunner RC Brushless Motor for Electric Radio Remote Control Planes (Recommended for Slow Stick RC Flyer) 2250 RPM $75 The 300DF is a light motor, designed to fly park flyers. Use the 300DF with a 3:1 or gearbox and large prop 8x4, or a speed demon on a 5x3 inch or smaller prop. 2 cell Lipo or 3 cell Lipo can be used with all this motor, but best performance can be achieved by using 3 cells+4.5:1 gear ratio with 12X6, or 11X7 or 11X4.7 props. The data for other props and gears: For 3.4:1 gearing use 11x7 HD, 11x4.7 SF For 4.5:1 gearing use 12x6, 11X4.7, 11X7 SF 300DF pusher props have proven to be spectacular. It has been flown with Wing Warrior Zaggis, Wattage HyperWing and Edge RC delta wing planes. Using a small prop direct drive and wings around 16 Oz weight, this is the best you can get at this price. With a 5x4 prop it draws about 12 amps. It is equally good with large props in a gearbox. So decide whether you want speed - 50+ MPH or slow fly with large props and a lot of torque and use this motor for both. Specifications Max Current: 10 Amps. KV: 2250 Weight: 29.7 grams Shaft Diameter: 2.3mm Mount holes: standard 16.5 & 19.5 We have done extensive testing on this motor and are really excited about putting it into action in some of our IFO's, Tiger Moths (can you say 3D Tiger Moth), PT-17, and any plane 12 oz's or less should go 3D ! The motor has been tested and works well with two and three LiPo cells in series. I like them on three LiPos ! A two cell runs between 6 and 8.4 volts. A three cell runs between 9 and 12.6 volts, depending on the state of charge. See the Tech Chart to figure out what type of performance you'll get with these motors. |
|
|
450XT Outrunner Brushless Motor for 3D Flyer $59.95 This is an awesome direct drive Motor. Fly's awesome in most park flyer type planes. Excellent torque for the 3D birds & Gliders to 30 oz. Customer feedback shows a 10x8 prop is pulling less then 14 amps on a 3-cell lipo and still pulling better then 22oz. of thrust. The 450 Series is bigger then the 400's we offer. Diameter of this motor is 27.7mm with a body length of 45mm. It weighs only 64 grams (Just over 2oz.). And has a 3mm shaft. Conveniently configured for pusher or puller application. Motor comes with an axi mount and screws. Does not come with bullet type connectors to plug to the ESC. And has fit every 28mm aluminum outrunner type mount I have tried so far. 450XT : Direct Drive 3-4 Cell Lipo 950KV ~ 13 Amps Direct Drive Stats (Stats by us at 4,907' above sea level) Prop Battery Thrust oz. Amps 9x7.5 11.1v Lipo 12 oz. 16 Amps 10x7 11.1V Lipo 24 oz. 17 Amps 11x4.7 11.1V Lipo 28 oz 18 Amps Tech Notes: Nice, Nice, Nice motor. Would be an excellent replacement for any park flyer in the 18oz. range. One of the best qualities for a guy who just likes to fly, pulling 25 minute flight time out of the GWS corsair with a 1600 mah 3 cell (conservative on the throttle). Upcoming projects include a FFF Giles, GWS Me-109, and who knows what else. Suggested set up: Direct drive with a 10x7 or 11x4.7 prop. |
|
|
400F Outrunner RC Brushless Motor for 3D Radio Remote Control Park Flyer 2250 RPM $75 This motor is a thrust machine intended for speed 400 gear drives. Drawing 12-15 Amps. It can also run as direct drive (with small props) taking advantage of the 2150Kv speed. Runs on 2-3 cell lipo packs. On a 3 cell it will turn a 6 x 3 prop at 20,000 rpm. Perfect for an insane park jet or very respectable wing. This motor performs great geared in a GWS speed 400 gear box. 3:1 or 3.9:1 seem to be the best ratio for this one. That allows it to be great fit for any stick mount application. Provides over 30 oz. of thrust with the correct gear prop combo (see data below). Direct drive with 5" to 6" props for fast jet or wing (see videos).. Motor comes with AXI mount for direct drive and screws to fit in to any GWS type speed 400 gear box. Mounting holes are 16mm (or roughly 5/8 in.). Does not come with bullet type connectors to plug to the ESC. Aside form the awesome performance of this line of motors. They are extremely user friendly. This is a type A motor. Meaning the shaft is removable So you can swap from pusher jet or wing to your favorite puller application. No more press fitting a shaft or buying a new bell if your shaft breaks. Simply loosen 2 screws and the shaft pulls out for easy replacement or mounting configuration. Made with high temp and high RPM bearings, and high temp magnets good beyond 180 degrees. Also the first I have seen in the industry the stator is now double bonded to the housing. Keeps the stator from moving when crashed during high amp draw situations With the 2.3mm shaft a pinion from a GWS 400 gear box will slide right on and secured with a dab of lock tight. No press fitting pinions and bending shatfs. The gear box allows easy manipulation of the motor to fit the speed, torque, and amp draw needed for your application. We also stock shafts, gear boxes, and apc props. Motor also accepts and is available with 3.0mm shafts. And any 3mm shaft can be used as a replacement. 400FA : Geared or Direct Drive 2150kv ~ 15 Apms (22 peak) ~ 26 Turns KV: 2150 Weight: 1.5oz (43g) Diameter: 26mm Length: 24mm Shaft: 2.3mm or 3.0mm Direct Drive Stats (obtained at 4900 feet) Prop Battery Thrust oz. Amps 5.5 x 4.5 11.1v Lipo 20 oz. 20 Amps 6 x 5.5 11.1v Lipo 22 oz. 23 Amps Geared 3:1 Stats (obtained at 4900 feet) Prop Battery Thrust oz. Amps 9 x 7.5 11.1v Lipo 22 oz. 15 Amps 10x7 11.1v Lipo 27 oz. 18 Amps 11 x4.7 11.1v Lipo 29 oz. 16 Amps Geared 3.9:1 Stats (obtained at 4900 feet) Prop Battery Thrust oz. Amps 10x7 11.1v Lipo 20 oz. |
|
|
Extra 330L-EP Extreme 3D RC Acrobatic Plane ARF $399.95 Extra 330L EP The Most Extreme 3D Acrobatic RC Plane! Great ready for some extreme maneuvers! The Flying Dream Extra-330L EP comes factory painted in a dazzling fancy color design that sure to draw attention. You don't even need to spend any time to decorate and it already looks like a beauty. The removable top hatch also helps ultra fast installation of the servos and other remaining electronics. The Extra-EP 330L is also a great flyer because of her large control surfaces. Full Aileron design Approx. 50% elevator surface Approx. 60% rudder surface A great combination of good looks and outstanding flying performance. Wingspan 1350mm Length 1150mm Weight 2300-2600g Wing Loading 76~78 dm/2 Airfoil Naca~0014 Wing Area 33 dm/2 Radio Control 4 Ch 4 Servos purchase separately Motors A3520/6~A4120/7 purchase separately ESC 20A~25A purchase separately |
|
|
ELECTRONIC SPEED CONTROLLER Tamiya-Standard Radio Control RC Airplane Electric Speed Controller (ESC) w/ BEC (Compatiable with for Great Planes Electrifly) $49 Electric Speed Control for Radio Control Airplane OUR Electronic Speed Controllers ARE MADE FOR ALL Electric R/C Airplanes !!! Can power up to a 600-Motor! The Buy-It-Now price is for ONE Tamiya-Standard Style-SD-MC10ADP Speed Controller Currently, we have over 5,000 pcs of this in stock and need to sell at this low low price to make room for new arrivals ! This ESC retail at least over $50 in retail store (most places we distribute to sell for around $38 ) Who buys from us??? Our ESC are used by many manufacturers all over the world in r/c electric planes, and many schools and hobby institutions (mostly those engineering dudes)! "Designed to work with almost all Radio Control Systems" Compatiable w/: FUTABA, JR, HITEC, AIRTRONICS, GWS, SANWA & AASHAI Radio Systems This is the Great Planes Compatiable micro high frequency electronic speed control with the battery eliminator circuitry (BEC). It is designed for electric motors up to a speed 600 in size. It will handle up to an 8 cell battery pack and is rated for a maximum of 22 amps continous current. Great Planes for illustration purposes only. It is NOT included. Model of product: SD-MC10ADP, Voltage of work: 7.2-8.4V, Maximal output currency: 18A, Voltage drop: <0.4V, Weight: 22.5g, Size: 34.6*26.6*15.2mm Function: This second-generation digital proportional speed controller has the function of automatic protection on low voltage, low reduction voltage and fixed motor firing point; Yet, the biggest advantages are its sensitive reaction and strong anti-interference. Even when the sending set is turned off, the motor will not make error action. This ESC is safe, reliable, and powerful. Compact Powerhouse The SD-MC10ADP electronic speed control (ESC) is extremely compact to minimize weight and simplify installation. It is an ideal speed control for electric airplanes up to a speed 600 motor size. The throttle function is fully proportional, so you can go from a slow idle to full throttle utlilizing the throttle control on your transmitter. It uses a "safe start" system to prevent accidental motor starts. In order to activate the throttle, you must first advance the throttle to full on, wait a couple of seconds and then pull the throttle to full off. This then "arms" the throttle and you are then ready to advance the throttle and the motor and propellor will begin to turn. Battery Eliminator Circuitry (BEC) The battery eliminator circuitry allows you to use the battery that is powering the motor to also power the servos. The SD-MC10ADP can power both the receiver and up to three standard, mini or micro servos, then as the motor draws the current down in the battery, the SD-MC10ADP will cut off the power to the motor when it reaches 4.8 volts, leaving enough |
|
|
Remote Control (RC) Insect Is A Great Flyer $58.47 Looking for a really cool remote control toy? Then the remote control (RC) insect is for you. This little marvel flies well and is fun inside or outside. Recommended for ages 8 and above. The RC insect is made of highly durable materials and comes with an extended life battery for better flying times. Plus, you can choose between expert and beginner flying modes right from the remote control. Comes ready to fly, just add 6 AA batteries and you are ready for real insect flying fun. Kids and adults get big kick from this toy. Want to fly to RC insects at once? No problem, order two today and we will send separate frequencies for the remote controls. |
|
|
2.4Ghz Exceed RC Eagle 50 3D Aerobatic 6-Channl Radio Remote Control RC Helicopter R/C Heli RTF $299.95 The Exceed RC Eagle 50 is a entry level 6 Channel Collective Pitch Helicopter (CP Helicopter), it adapts Tail Motor design. Motor driven tail rotor provides some advantage to beginners, because the lack of Rudder Servo, you have one thing less to worry. You simply change the tail motor if the tail fails to hold, this is some good news for beginners. Exceed RC Eagle 50 2.4G Edition is a very good choice for first time flyer. The power is good enough for hovering or even 3D action. The parts are easy to find and the price is low. The mechanism cannot be more simple. It is not difficult to calibrate and maintain for a beginner. That's very important. The Eagle indoor electric helicopter is an ideal introduction to more advanced R/C heli's. Powered by high performance, high quality receiver/electronic/speed control and gyro keep this helicopter light and stable. Full parts availability ensures that when accidents occur, we can get you flying again with minimum of fuss. The Eagle 50 is ready to fly out of the box within minutes. Everything needed to fly is included and installed such as a battery pack, motor, electronic and a 6 channel 2.4Ghz radio system. All that is needed are 8 "AA" batteries for the transmitter. Plus, each Eagle 50 is test-flown at the factory to ensure precise performance and control which makes it truly ready to fly right from the box. Main Rotor Diameter: 550 MM 22 inch Tail Rotor Diameter: 150 MM 6 inch Overall Length: 580 MM 23 inch Overall Height: 180 MM 7 inch All-up Weight: 540g (battery included) 19 ounce Battery: 11.1V 800mAh /10C rechargeable Lipo battery Power: 370 carbon brush motor Servo: 3 x 7.6g Pitch Control: Rubber, aileron, elevator and throttle, CCPM mode, 3D conversion and alterable pitch system Radio System: 6 Channel 2.4Ghz TransmitterCharger: Quick 110V wall charger Computer Simulation: Serial simulation cable (software not included) Features 1). CCPM mixing control system and collective pitch control system make perfect 3D maneuvers such as rolls, inverted, and swoop flights.2). Fiber main frame and metal tail boom make Eagle 50 firm and simplified. Easy-to-be mounted parts like servo are adopted.3). Brushed motor as the main power is powerful and makes the flight much stable.4). High quality servo is prompt in reaction; it matches with the strong magnetic tail motor and can fly various flight courses.5). The flight time on 11.1V 800mAh Li-Po battery pack will be 7- 9 minutes, depending on your flight6). The usage of 2.4G technology is prompter in reaction, more sensitive in operation, and stronger in anti-interferenc |
|
|
2-Channel SD Yellow Bee RTF Electric Radio Remote Controlled RC Plane $89 NEW! Ready to fly out of its box! Complete system with radio, rechargeable battery and AC charger! Each battery has 10+ minutes of air-time!!! SD3382 Yellow Bee Twin Engine Complete RC Airplane ....... **A Great First Plane for Beginners!** I personally bought and flew this plane because I was completely new to flying and did not want to Smash and Trash a $400.00 gas plane, thanks to this Park flyer, I'm ready to move to the next level. best of all no permit was required to fly this. I opted to purchase the longer lasting NiMH batteries (2) that can yield up to 40 minutes flight time between the two. A ready-to-fly R/C plane that's easy-to-operate, sturdy enough to "crash without being trashed". The R/C Ready To Fly (RTF) park flyer has glider-like stability suitable for flight in small nearby areas like parks and ball fields. Recommended for Ages 12+. Ready-To-Fly right out of the box. Just add batteries to the transmitter, charge the flight batteries using the included charger, bolt the tail wing to the boom, connect the flap push rods and you're ready to fly! * **The Radio Transmitter*** The transmitter has simple 2-channel proportional joystick controls with trims. The left stick controls the throttle and the right stick controls the tail flaps for turning. It's kind of like driving a car except the faster you go, the higher you climb! The radio transmitter (shown above) also features trim controls for precise adjustments of throttle and flaps. The control range is 1500' to give you plenty of margin Ready-To-Fly right out of the box. Remarkable crash-tolerant construction The ability to "crash without being trashed" makes the park flyer a true "survivor" The Planes single-piece poly molded fuselage and fiberglass tail boom is exceptionally tough. Forget about those hard crashes that usually destroy front-end motors and propellers, because the YellowBee's motor and pusher propeller are rear-mounted. Tough, enamel-coated foam wings attach with rubber bands that pop off in a crash to prevent extensive wing damage. If you're a beginner you will be especially glad to know that I include several spare parts to help you through the ordinary mishaps which are all part of the learning process. Just add batteries and you are ready to fly. With this plane, you don't just get a RTF plane. You get the radio transmitter too! All you need to provide is 8 AA batteries for the transmitter. The park flyer comes complete with RTF airplane with motor, receiver, and throttle speed controller. One flight battery packs and AC charger are also included. |
|
|
Dynam 6 Channel E-Razor 450 Metal 3D RC Helicopter RTF $399.95 Product Name: E-RAZOR 450 Item: DY8918 Specification: 1. Type: RTF Electric 3D Heli 2. Transmitter:6CH RTF/ARF RC Helicopter 3. Length: 25.8in (655mm) 4. Main Rotor Diameter: 28.3in (720mm) 5. Tail Rotor Dianeter: 5.3in (135mm) 6. Gross Weight: RTF with li-po battery(670g) 7. Battery: 11.1V 2200MAH 15C li-polymer 8. Motor: Brushless 2750KV 9. Control mode: 120-Degree CCPM system Features: 1.Simplify, compact and high-rigidity frame. let all electric system install easy and nice looking. 2.Use Direct-belt-drive, save power and let helicopter very quiet. 3.Use new gear inverse design:13:105, let motor more powerful and long-time. 4.By optimize design of tail gear inverse 51:11 and more long tail-blade journey, let helicopter tail more Smooth and easy lock when you flying. 5.Simple, separate servos-frame, let flyer easy install and repair. 6.In main frame, use 3pcs belling, insure to the main shaft concentric and less shake. 7.High-precision tail double-push frame, more smooth and wearable. 8.The separate main gear let flyer install and repair more easy and fast. Instruction Manual FMS Transmitter Item NO: RACON X6 Frequency: 35MHz/72MHz/36MHz Channel: 6 channel Modulation: FM Servo Weight: 9g Torque:4.8V 1.5kg-cm Speed:4.8V/0.12sec/60° Size(mm):24×11×24 ESC Size: 50x25x7mm Weight: 23g Current: 40A [Ni/NiMh]/servos: 6/5 8/5 10/4 12/3 [Li-XX]/servos: 2/5 3/4 Receiver |
|
|
Dynam E-Razor 250 6 Channel Metalic 3D Brushless Ready to Fly RC Helicopter $349.95 This listing is for the Dynam E-Razor 250 Collective Pitch Helicopter. The Dynam E-RAZOR size 250 Brushless Powered belt 3D model electric helicopter is Ready to Fly & is a full 3D Aerobatic Collective Pitch Helicopter with belt driven tail. It includes head-locking GY192 Gyro, 2 cell 7.4V 850MAH 15C Li-Po Battery & Balancing Charger with AC power adapter and comes complete with a RACON X6 6 channel transmitter. This model is well constructed and it looks great! All components are pre-installed and set-up at factory. The DYNAM E-RAZOR 250 comes with 15A brushless ESC which is matched to a 4800 KV Brushless motor. Product Name: E-RAZOR 250 Item: DY8919 Specification: 1. Type: RTF Electric 3D Heli 2. Transmitter:6CH RTF/ARF RC Helicopter 3. Length: 420mm 4. Height: 161mm 5. Main Rotor Diameter: 438mm 6. Tail Rotor Dianeter: 105mm 7. Gyro: GY192 Head Lock Gyro 8. Battery: 7.4V 850MAH 15C li-polymer 9. Motor: Brushless 4800KV 10. Servo: 7g*4pcs Features: 1.Simplify, compact and high-rigidity frame. let all electric system install easy and nice looking. 2.Use Direct-belt-drive, save power and let helicopter very quiet. 3.Simple, separate servos-frame, let flyer easy install and repair. 4.In main frame, use 3pcs belling, insure to the main shaft concentric and less shake. 5.High-precision tail double-push frame, more smooth and wearable. 6.The separate main gear let flyer install and repair more easy and fast. Instruction Manual FMS Brushless motor 4800KV Servo Weight: 7g Torque:4.8V 1.6kg-cm Speed:4.8V 0.1sec/60° Size(mm): 21.8×11×19.8 |
|
|
4-CHANNEL EP-Powered AT-6 Texan RC AIRPLANE Model Kit (Unassembled) $49.95 Features: 4 Channel Remote Control Airplane Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible Constructed with Super Tough, lightweight EPO material! Perfect appearance and emulation (Scale appearance, great attention has been given to details) True Classic Trainer of All Time! Decorative Waterslide Decals! Easy to Build & Endless Fun to Fly! Perfect Low-Wing Trainer! Rudder helps steer plane on ground on its scale landing gear for easy take off Shock Resistant Reinforced fuselage and Strong Wings Can Take Off From Ground or Hand Launched Ground Take-Off can be performed easily Huge Wing size, Excellent Flight Performance Super easy and super stable electric powered scale R/C park flyer for beginner or middle-level users Stable inverted flight Super stable for beginner, Super low speed for safety, Super low altitude for fun Fabricated by accurate molds with high fidelity of real airplane Excellent stability and aerobatic capability Detailed Body Structure High roll rate Super low speed for safety, Super low altitude for fun Crash Resistant Construction Easy to Fly, Easy to Control, Super stable for beginner Slow Speed Flying Capable, Good for Beginner Suitable for both beginners and experienced pilots Specifications: Wingspan: 900mm (35.4") Length: 680mm (26.7") Flying Weight: 480g (16.9 oz) Requirements: Drive System: 370 carbon brushed motor Servo: 3X 9g high speed micro servos ESC: 20A speed controller Battery: 9.6V 650mah Ni-MH Control system: 4 CH Multifunctional Radio Transmitter and Receiver Included: Airplane Kit Unassembled Screw Driver 4 Propellers English Manual |
|
|
Upgraded Brushless J3 Piper Cub 3-Channel Radio Remote Control RC Scale Plane RTF $299.95 Specification: Wingspam: 955mm / 37.40inch Length: 730mm / 28.74inch Flying Weight: 450g Drive System: 2410 Brushless Motor 1200KV Speed Controller:20A Brushless Electronic speed controller Servo: 2x10g Battery: 11.1V 1000mah 15C LiPo Battery Control system: 3 CH Multifunctional Radio Transmitter and Micro Receiver Radio Control Range: > 1000 feet (300m) Feature: 3 Channel Full Function Radio Controlled ( Elevator, Rudder, Throttle) Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible The wing and body used in this jet are specially designed to allow high G maneuvers, yet the wing loading is still very low Powerful brush motor makes it possible to fly this plane at high speed in the situations with much wind Excellent stability of nosing up and down Rudder helps steer plane on ground on its scale landing gear for easy take off Ready to Fly in Just Minutes! Super tough, lightweight airframe! Perfect appearance and emulation (Scale appearance, great attention has been given to details) Shock Resistant Reinforced Fuselage and Strong Wings Can Take Off From Ground or Hand Launched Ground Take-Off can be performed easily Excellent Flight Performance Super easy and super stable electric powered scale R/C park flyer for beginner or middle-level users Stable inverted flight Fuselage with pre-installed Electronics, Motor, Servos, and Speed Controller Super stable for beginner, Super low speed for safety, Super low altitude for fun Fabricated by accurate molds with high fidelity of real airplane Excellent stability and aerobatic capability Detailed Body Structure High roll rate Digital Proportional Motor Speed Control Slow Speed Flying Capable, Good for Beginner Suitable for both beginners and experienced pilots Approximately 10-15 minutes flight time on each charge Complete Kit, Ready to Fly, Easy to Assemble (Everything is included and 90% assembled -- only required 8 AA batteries for the transmitter to start flying) |
|
|
4-Channel Electric Powered AT-6 Texan (Silver) RC Airplane Model Kit (Unassembled) $49.95 Features: 4 Channel Remote Control Airplane Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible Constructed with Super Tough, lightweight EPO material! Perfect appearance and emulation (Scale appearance, great attention has been given to details) True Classic Trainer of All Time! Decorative Waterslide Decals! Easy to Build & Endless Fun to Fly! Perfect Low-Wing Trainer! Rudder helps steer plane on ground on its scale landing gear for easy take off Shock Resistant Reinforced fuselage and Strong Wings Can Take Off From Ground or Hand Launched Ground Take-Off can be performed easily Huge Wing size, Excellent Flight Performance Super easy and super stable electric powered scale R/C park flyer for beginner or middle-level users Stable inverted flight Super stable for beginner, Super low speed for safety, Super low altitude for fun Fabricated by accurate molds with high fidelity of real airplane Excellent stability and aerobatic capability Detailed Body Structure High roll rate Super low speed for safety, Super low altitude for fun Crash Resistant Construction Easy to Fly, Easy to Control, Super stable for beginner Slow Speed Flying Capable, Good for Beginner Suitable for both beginners and experienced pilots Specifications: Wingspan: 900mm (35.4") Length: 680mm (26.7") Flying Weight: 480g (16.9 oz) Requirements: Drive System: 370 carbon brushed motor Servo: 3X 9g high speed micro servos ESC: 20A speed controller Battery: 9.6V 650mah Ni-MH Control system: 4 CH Multifunctional Radio Transmitter and Receiver Included: Airplane Kit Unassembled Screw Driver 4 Propellers English Manual |
|
|
AirField 70MM Brushless EDF F-16 Thunderbird Electric Ducted Fan Radio Controlled RC Jet w/ Bombs RTF $399.95 This 70mm F-16 Fighter is a high quality EPS foam model of the famous ?Fighting Falcon?. The F-16 is known as the ?Viper? in US service. It was the first fighter designed to sustain 9g maneuvers. One of the outstanding features is its frameless bubble canopy, which gives excellent all-round vision. The F-16 has been and will remain the multi-role workhorse of the United States Air Force. The F-16 was the main fighter used in the 1991 Gulf War and is still used in today?s ?War on Terror?. The Air National Guard regularly deploys these fighters to the Middle East. In honor of the US Fighters, it is only appropriate that we built these jets with extra care and fine detail. It is painted with an excellent finish to make it look just like the real thing. No details were left out, from the after burner, the missiles, to the predominant nose. To do the F-16 justice, we used the newest electronics and gave it the U.S. Air Force look. Even though we went out of the way to mirror the real F-16, this EDF Jet was also built to be user friendly and ready to fly. The fuselage is pre-assembled and it requires very minimal assembly to get it soaring in the sky. 4 Channel Full Function Radio Controlled (Aileron,Elevator,Rudder,Throttle) Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible Excellent hedgehopping performance High speed, flying speed at 80mph+!!! Excellent stability of nosing up and down State of the art components such as Outrunner Brushless Ducted Fan, 45amp Speed Control, and 2200mah 20C 14.8 Volt Li-Po Battery Pack famousus "Cobra Maneuver" available Steerable nose landing gear Rudder helps steer plane on ground on its scale landing gear for easy take off Super tough, lightweight airframe! Shock Resistant Reinforced fuselage and Strong Wings Can Take Off From Ground or Hand Launched Ground Take-Off can be performed easily Excellent Flight Performance Super easy and super stable electric powered scale R/C park flyer for beginner or middle-level users Stable inverted flight fuselage with pre-installed Electronics, Motor, Servos, and Speed Controller Superb Quality, Simply the Best RTF Jet you can find!!! Super stable for beginner, Super low speed for safety, Super low altitude for fun Fabricated by accurate molds with high fidelity of real airplane Excellent stability and aerobatic capability High roll rate Digital |
|
|
AirField 70MM Brushless EDF F-16 Tiger Jet Electric Ducted Fan RC Jet w/ Bombs RTF $399.95 This 70mm F-16 Fighter is a high quality EPS foam model of the famous ?Fighting Falcon?. The F-16 is known as the ?Viper? in US service. It was the first fighter designed to sustain 9g maneuvers. One of the outstanding features is its frameless bubble canopy, which gives excellent all-round vision. The F-16 has been and will remain the multi-role workhorse of the United States Air Force. The F-16 was the main fighter used in the 1991 Gulf War and is still used in today?s ?War on Terror?. The Air National Guard regularly deploys these fighters to the Middle East. In honor of the US Fighters, it is only appropriate that we built these jets with extra care and fine detail. It is painted with an excellent finish to make it look just like the real thing. No details were left out, from the after burner, the missiles, to the predominant nose. To do the F-16 justice, we used the newest electronics and gave it the U.S. Air Force look. Even though we went out of the way to mirror the real F-16, this EDF Jet was also built to be user friendly and ready to fly. The fuselage is pre-assembled and it requires very minimal assembly to get it soaring in the sky. 4 Channel Full Function Radio Controlled (Aileron,Elevator,Rudder,Throttle) Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible Excellent hedgehopping performance High speed, flying speed at 80mph+!!! Excellent stability of nosing up and down State of the art components such as Outrunner Brushless Ducted Fan, 45amp Speed Control, and 2200mah 20C 14.8 Volt Li-Po Battery Pack famousus "Cobra Maneuver" available Steerable nose landing gear Rudder helps steer plane on ground on its scale landing gear for easy take off Super tough, lightweight airframe! Shock Resistant Reinforced fuselage and Strong Wings Can Take Off From Ground or Hand Launched Ground Take-Off can be performed easily Excellent Flight Performance Super easy and super stable electric powered scale R/C park flyer for beginner or middle-level users Stable inverted flight fuselage with pre-installed Electronics, Motor, Servos, and Speed Controller Superb Quality, Simply the Best RTF Jet you can find!!! Super stable for beginner, Super low speed for safety, Super low altitude for fun Fabricated by accurate molds with high fidelity of real airplane Excellent stability and aerobatic capability High roll rate Digital Propor |
|
|
The New 2009 Model 4 Channel Warbird F4U Corsair RTF RC Ready to Fly Electric Airplane $84.95 4 Channel Full Function Radio Controlled (Aileron,Elevator,Rudder,Throttle) Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible Constructed with Super Tough, lightweight EPO material! Perfect appearance and emulation (Scale appearance, great attention has been given to details) True Classic Trainer of All Time! Decorative Waterslide Decals! Easy to Build & Endless Fun to Fly! Perfect Low-Wing Trainer! Rudder helps steer plane on ground on its scale landing gear for easy take off Ready to Fly in Just Minutes! Shock Resistant Reinforced fuselage and Strong Wings Can Take Off From Ground or Hand Launched Ground Take-Off can be performed easily Huge Wing size, Excellent Flight Performance Super easy and super stable electric powered scale R/C park flyer for beginner or middle-level users Stable inverted flight fuselage with pre-installed Electronics, Motor, Servos, and Speed Controller Super stable for beginner, Super low speed for safety, Super low altitude for fun Fabricated by accurate molds with high fidelity of real airplane Powerful 370 motor with expert-designed propellers and hi-capacity Ni-MH battery pack Excellent stability and aerobatic capability Detailed Body Structure High roll rate Digital Proportional Motor Speed Control Super low speed for safety, Super low altitude for fun Crash Resistant Construction Easy to Fly, Easy to Control, Super stable for beginner Slow Speed Flying Capable, Good for Beginner Suitable for both beginners and experienced pilots Wingspan: 840mm (33") Length: 750mm (29.5") Flying Weight: 420g (14.8 oz) Drive System: 370 carbon brushed motor Servo: 3X 9g high speed micro servos ESC: 20A speed controller Battery: 9.6V 650mah Ni-MH Control system: 4 CH Multifunctional Radio Transmitter and Receiver Radio Control Range: 1000 feet (300m) Airplane (90% assembled) 4 Channel Multifunctional Radio Transmitter Wall Battery Charger High Quality Rechargeable 9.6V 650mah Ni-MH Battery English Manual 4 Propellers |
|
|
The New 2009 Model 4 Channel Warbird F4U Corsair RTF RC Ready to Fly Electric Airplane Gray Version $84.95 4 Channel Full Function Radio Controlled (Aileron,Elevator,Rudder,Throttle) Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible Constructed with Super Tough, lightweight EPO material! Perfect appearance and emulation (Scale appearance, great attention has been given to details) True Classic Trainer of All Time! Decorative Waterslide Decals! Easy to Build & Endless Fun to Fly! Perfect Low-Wing Trainer! Rudder helps steer plane on ground on its scale landing gear for easy take off Ready to Fly in Just Minutes! Shock Resistant Reinforced fuselage and Strong Wings Can Take Off From Ground or Hand Launched Ground Take-Off can be performed easily Huge Wing size, Excellent Flight Performance Super easy and super stable electric powered scale R/C park flyer for beginner or middle-level users Stable inverted flight fuselage with pre-installed Electronics, Motor, Servos, and Speed Controller Super stable for beginner, Super low speed for safety, Super low altitude for fun Fabricated by accurate molds with high fidelity of real airplane Powerful 370 motor with expert-designed propellers and hi-capacity Ni-MH battery pack Excellent stability and aerobatic capability Detailed Body Structure High roll rate Digital Proportional Motor Speed Control Super low speed for safety, Super low altitude for fun Crash Resistant Construction Easy to Fly, Easy to Control, Super stable for beginner Slow Speed Flying Capable, Good for Beginner Suitable for both beginners and experienced pilots Wingspan: 840mm (33") Length: 750mm (29.5") Flying Weight: 420g (14.8 oz) Drive System: 370 carbon brushed motor Servo: 3X 9g high speed micro servos ESC: 20A speed controller Battery: 9.6V 650mah Ni-MH Control system: 4 CH Multifunctional Radio Transmitter and Receiver Radio Control Range: 1000 feet (300m) Airplane (90% assembled) 4 Channel Multifunctional Radio Transmitter Wall Battery Charger High Quality Rechargeable 9.6V 650mah Ni-MH Battery English Manual Screw Driver |
|
|
Upgraded 4-CH Catalina RC SeaPlane w/ Dual Brushless Motor & ESC+ Floats + LiPo Battery 100% RTF $399.95 (NO CHARGER AND AC ADAPTER) Specification: Wingspan: 1380mm (54.3") Length: 880mm (34.6") Flying Weight: 780g (27.5 oz) Drive System: Twin 2410-size brushless motors w/ 1200KV Speed Controller: 25A brushless speed controller Servo: 3x10g Battery: 11.1V 15C 1500MAH Li-Poly Control system: 4 CH Multifunctional Radio Transmitter and Micro Receiver Radio Control Range: > 1000 feet (300m) Feature: 4 Channel Full Function Radio Controlled (Aileron, Elevator, Rudder, Throttle) Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible The wing and body used in this jet are specially designed to allow high G maneuvers, yet the wing loading is still very low Powerful 2410-size brushless motor (1200KV) makes it possible to fly this plane at high speed in the situations with much wind Includes 11.1v 15c 1500mAH LiPo Battery Excellent stability of nosing up and down Rudder helps steer plane on water Ready to Fly in Just Minutes! Super tough, lightweight airframe! Perfect appearance and emulation (Scale appearance, great attention has been given to details) Shock Resistant Reinforced Fuselage and Strong Wings Can Take Off From water or Hand Launched Excellent Flight Performance Super easy and super stable electric powered scale R/C park flyer for beginner or middle-level users Stable inverted flight Fuselage with pre-installed Electronics, Brushless Motor, Servos, and Speed Controller Super stable for beginner, Super low speed for safety, Super low altitude for fun Fabricated by accurate molds with high fidelity of real airplane Excellent stability and aerobatic capability Detailed Body Structure High roll rate Digital Proportional Motor Speed Control Slow Speed Flying Capable, Good for Beginner Suitable for both beginners and experienced pilots Approximately 10-15 minutes flight time on each charge Complete Kit, Ready to Fly, Easy to Assemble (Everything is included and 90% assembled -- only required 8 AA batteries for the transmitter to start flying) Package Include: Airplan |
|
|
Upgraded Brushless F4U Corsair 4-Channel Electric Radio Remote Controlled RC Warbird Plane Ready-to-Fly RTF! $299.95 The F4U Corsair was the most famous of all the aircraft in WWII. This F4U Corsair has been a favorite of R/C modelers for years, and now available as an easy-going, 100% Ready-to-Fly replica that is small enough and quiet enough for flying sorties at your local park or sport field! RTF (Ready To Fly) Version Specification: Wingspan: 870mm (34.5") Length: 750mm (29.53") Flying Weight: 400g (14.11 oz) Drive System: 2410 Brushless Motor 1200KV Speed Controller:20A Brushless Electronic speed controller Servo: 3x10g Battery: 11.1V 1000mah 15C LiPo Battery Control system: 4 CH Multifunctional Radio Transmitter and Micro Receiver Radio Control Range: > 1000 feet (300m) Feature: 4 Channel Full Function Radio Controlled (Aileron, Elevator, Rudder, Throttle) Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible The wing and body used in this jet are specially designed to allow high G maneuvers, yet the wing loading is still very low Powerful brush motor makes it possible to fly this plane at high speed in the situations with much wind Excellent stability of nosing up and down Rudder helps steer plane on ground on its scale landing gear for easy take off Ready to Fly in Just Minutes! Super tough, lightweight airframe! Perfect appearance and emulation (Scale appearance, great attention has been given to details) Shock Resistant Reinforced Fuselage and Strong Wings Can Take Off From Ground or Hand Launched Ground Take-Off can be performed easily Excellent Flight Performance Super easy and super stable electric powered scale R/C park flyer for beginner or middle-level users Stable inverted flight Fuselage with pre-installed Electronics, Motor, Servos, and Speed Controller Super stable for beginner, Super low speed for safety, Super low altitude for fun Fabricated by accurate molds with high fidelity of real airplane Excellent stability and aerobatic capability Detailed Body Structure High roll rate Digital Proportional Motor Speed Control Slow Speed Flying Capable, Good for Beginner Suitable for both beginners and experienced pilots Approximately 10-15 minutes flight time on each charge Complete Kit, Ready to Fly, Easy to Assemble (Everything is included and |
|
|
|
September 3rd, 2008 in
RC Airplanes