RC Wing Fighter Cox
RC Wing Fighter Cox
 |
No items matching your keywords were found.
_________________________________________________________________________________
|
|
Fokker DR-1 .90 Engine Size, 45" Wing-Span, 4-Channel, Nitro Gas Radio Remote Controlled RC Tri-Wing Airplane $499.95 The Fokker Dr. I Dreidecker (triplane) was a World War I fighter aircraft designed by Reinhold Platz and built by Fokker-Flugzeugwerke. The Dr.I saw widespread service in the spring of 1918. It became renowned as the aircraft in which Manfred von Richthofen gained his last 20 victories, and in which he was killed on 21 April 1918. Specifications: Wing Span : 45 in / 1143mm Wing Area : 850 sq in / 54.8 sq dm Flying Weight : 6.6 lb / 3000 g Fuselage Length : 43.5 in / 1105 mm Requirements: Engine Required :2c 0.75 ; 4c 0.91 Radio Required : 4channels 5 servos |
|
|
CMP Zero Fighter 50cc - 80" ARF Nitro Gas Radio Remote Controlled RC Airplane New! $799.95 The Mitsubshi A6M5 52 with wingspan of 2100mm is the biggest brother from the CMPro Japanese Fighter Series. This model, well designed for 40~50cc gas engines, features a fiberglass molded fuselage and painted wing panels. The attention to detail results in an extremely realistic model that flies as look as it looks. Wingspan 2100mm Length 1700mm Weight 6.2~6.5 kg Wing Loading 77~81 dm/2 Airfoil Naca 2415 Wing Area 80 dm/2 Radio Control 5~6 Ch 8~9 Servos purchase separately 2 Strok Engine 40~50 purchase separately The whole aircraft is painted in a matt finish which greatly enhances its scale features. A fixed undercarriage is included while optional retracts fitting is also available. Decals come ready applied and clear coated ? that doesn?t only make the kit more durable but shortens building time as well. A carbon fiber wing tube is included with kit. |
|
|
4 CH A-10 Thunderbolt II Radio Remote Control Electric Ducted Fan RC Fighter Jet RTF (Desert) $79 The A-10 program is developing the next-generation air superiority fighter for the Air Force to counter emerging worldwide threats. This A-10 holds the same beautiful lines as the original fighter jet. The wing and body used in this jet are specially designed to allow high G maneuvers, yet the wing loading is still very low. It becomes a stable aircraft with excellent performance. RTF (Ready To Fly) Version What the Pro says! Construction quality and paintwork from the factory is excellent, no problems at all. It took me about 20 minutes to put it together using five minute epoxy. I left the landing gear off, I prefer to hand launch. Be sure ot put some tape on the bottom for protection. The plane flies fine on the stock NIMH pack and brushed motors, in spite of all the internet "Experts" saying it would not. It will loop and roll, no problem, but it's modestly powered with the stock setup, and flight times are maybe five minutes, tops. Swapping out the 650NIMH pack for a three cell 1300 lipo made a whole new airplane out of it. Now it is fast and vividly aerobatic, and flight times are long. I set a timer at eight minutes to make sure I do not overdrain the lipo and ruin it. No reason why you could not put in a 2200 pack, either. Beware of one thing, though...the way it is set up from the factory, there is way too much elevator throw, and you may kill it on the first flight attempt. Move the control horn to the innermost hole on the elevator servo horn, and the outermost one on the horn on the elevator, and everything will be fine. I am still using the included 27mhz radio. It will occasionally glitch if I point the TX antenna right at the airplane, otherwise, it has been working fine. I have put a dozen flights in using the 11v lipo and the stock brushed motors, and the motors and ESC are still going strong, so consider that before buying a brushless converson for it. Power is a non-issue with the stock motors and a lipo batt. The plane is stable and easy to fly, yet very aerobatic. I like flying it in low and close, like the real thing. All I can say is the plane is better than expected in all respects, much better than similar offering, and it is well built and a super value for the money. Great plane to keep in the back of the car and toss around whenever you see an open space.For more reviews and comments on other NitroPlanes.com products by rc enthusiasts, click here. Specification: Wingspan: 872mm (34.5") Length: 968mm (38") Flying Weight: 450g (16 oz) Drive System: Twin 370 |
|
|
New 4 CH A-10 Thunderbolt II Radio Remote Control Electric Ducted Fan RC Fighter Jet RTF (Camo) $79 The A-10 program is developing the next-generation air superiority fighter for the Air Force to counter emerging worldwide threats. This A-10 holds the same beautiful lines as the original fighter jet. The wing and body used in this jet are specially designed to allow high G maneuvers, yet the wing loading is still very low. It becomes a stable aircraft with excellent performance. RTF (Ready To Fly) Version What the Pro says! Construction quality and paintwork from the factory is excellent, no problems at all. It took me about 20 minutes to put it together using five minute epoxy. I left the landing gear off, I prefer to hand launch. Be sure ot put some tape on the bottom for protection. The plane flies fine on the stock NIMH pack and brushed motors, in spite of all the internet "Experts" saying it would not. It will loop and roll, no problem, but it's modestly powered with the stock setup, and flight times are maybe five minutes, tops. Swapping out the 650NIMH pack for a three cell 1300 lipo made a whole new airplane out of it. Now it is fast and vividly aerobatic, and flight times are long. I set a timer at eight minutes to make sure I do not overdrain the lipo and ruin it. No reason why you could not put in a 2200 pack, either. Beware of one thing, though...the way it is set up from the factory, there is way too much elevator throw, and you may kill it on the first flight attempt. Move the control horn to the innermost hole on the elevator servo horn, and the outermost one on the horn on the elevator, and everything will be fine. I am still using the included 27mhz radio. It will occasionally glitch if I point the TX antenna right at the airplane, otherwise, it has been working fine. I have put a dozen flights in using the 11v lipo and the stock brushed motors, and the motors and ESC are still going strong, so consider that before buying a brushless converson for it. Power is a non-issue with the stock motors and a lipo batt. The plane is stable and easy to fly, yet very aerobatic. I like flying it in low and close, like the real thing. All I can say is the plane is better than expected in all respects, much better than similar offering, and it is well built and a super value for the money. Great plane to keep in the back of the car and toss around whenever you see an open space.For more reviews and comments on other NitroPlanes.com products by rc enthusiasts, click here. Specification: Wingspan: 872mm (34.5") Length: 968mm (38") Flying Weight: 450g (16 oz) Drive System: Twin 370 ducted fan motors Speed Controller: 25A speed controller |
|
|
Gas Fokker DR-1 - 45" .90 Size Nitro Gas Engine Radio Remote Controlled RC Tri-Wing-Plane [Yellow/Black Version] $399.95 The Fokker Dr. I Dreidecker (triplane) was a World War I fighter aircraft designed by Reinhold Platz and built by Fokker-Flugzeugwerke. The Dr.I saw widespread service in the spring of 1918. It became renowned as the aircraft in which Manfred von Richthofen gained his last 20 victories, and in which he was killed on 21 April 1918. Specifications: Wing Span : 45 in / 1143mm Wing Area : 850 sq in / 54.8 sq dm Flying Weight : 6.6 lb / 3000 g Fuselage Length : 43.5 in / 1105 mm Requirements: Engine Required :2c 0.75 ; 4c 0.91 Radio Required : 4channels 5 servos |
|
|
Upgraded Brushless Zero Fighter 4-Channel Radio Remote Control RC Scale Plane RTF $299.95 The Zero was the most famous of all the aircraft in WWII. In the entire history of military aviation, there has never been an airplane that could match the Zero for ruggedness and dependability. This Zero has been a favorite of R/C modelers for years, and now available as an easy-going, 100% Ready-to-Fly replica that is small enough and quiet enough for flying sorties at your local park or sport field! RTF (Ready To Fly) Version Specification: Wingspan: 870mm (34.5") Length: 730mm (29") Flying Weight: 405g (14 oz) Speed Controller:20A Brushless Electronic speed controller Servo: 3x10g Battery: 11.1V 1000mah 15C LiPo Battery Control system: 4 CH Multifunctional Radio Transmitter and Micro Receiver Control system: 4 CH Multifunctional Radio Transmitter and Micro Receiver Radio Control Range: > 1000 feet (300m) Feature: 4 Channel Full Function Radio Controlled (Aileron, Elevator, Rudder, Throttle) Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible The wing and body used in this jet are specially designed to allow high G maneuvers, yet the wing loading is still very low Powerful brush motor makes it possible to fly this plane at high speed in the situations with much wind Excellent stability of nosing up and down Rudder helps steer plane on ground on its scale landing gear for easy take off Ready to Fly in Just Minutes! Super tough, lightweight airframe! Perfect appearance and emulation (Scale appearance, great attention has been given to details) Shock Resistant Reinforced Fuselage and Strong Wings Can Take Off From Ground or Hand Launched Ground Take-Off can be performed easily Excellent Flight Performance Super easy and super stable electric powered scale R/C park flyer for beginner or middle-level users Stable inverted flight Fuselage with pre-installed Electronics, Motor, Servos, and Speed Controller Super stable for beginner, Super low speed for safety, Super low altitude for fun Fabricated by accurate molds with high fidelity of real airplane Excellent stability and aerobatic capability Detailed Body Structure High roll rate Digital Proportional Motor Speed Control Slow Speed Flying Capable, Good for Beginner Suitable for both beginners and experienced pilots Approximately 10-15 minutes flight time on each charge Complete Kit, Ready to Fly, E |
|
|
64mm Art-Tech 4 Channel 2.4Ghz MiG-15 3D Radio Remote Control Electric Ducted Fan RC Fighter Jet RTF Ready to Fly! $499.95 The Mikoyan-Gurevich MiG-15 Russian jet fighter developed for the USSR by Artem Mikoyan and Mikhail Gurevich. The MiG-15 was one of the first successful swept-wing jet fighters, and it achieved fame in the skies over Korea, where early in the war, it outclassed all enemy fighters. The MiG-15 also served as the starting point for development of the more advanced MiG-17 which would oppose American fighters over Vietnam in the 1960s. The MiG-15 is believed to have been one of the most numerous jet aircraft ever made, with over 12,000 built. The Mig-15 is often mentioned along with the F-86 Sabre in lists of the best fighter aircraft of the Korean War and in comparison with fighters of other eras. 4 Channel Full Function Radio Controlled (Aileron, Elevator, Rudder, Throttle) New 2.4GHz spectrum technology, with the functions of automatic identification and precise code pairing, strong anti-jamming, and allow more than 20 aircrafts to fly at the same field at same time Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible Excellent performance and flying speed at 70mph!!! One of the best ducted fan jet in the market! State of the art components such as 4300kv In-Runner Brushless Ducted Turbo Fan, 30amp Brushless Speed Control, and 1600mah 11.1 Volt 15C Li-Po Battery Pack Famous "Cobra Maneuver" available Turning front-wheel Rudder helps steer plane on ground on its scale landing gear for easy take off Ready to Fly in Just Minutes! Super tough, lightweight airframe! Perfect appearance and emulation (Scale appearance, great attention has been given to details) Shock Resistant Reinforced fuselage and Strong Wings Can Take Off From Ground or Hand Launched Ground Take-Off can be performed easily Excellent Flight Performance Super easy and super stable electric powered scale R/C park flyer for beginner or middle-level users Stable inverted flight fuselage with pre-installed Electronics, Motor, Servos, and Speed Controller Superb Quality, Simply the Best RTF Jet you can find!!! Super stable for beginner, Super low speed for safety, Super low altitude for fun Fabricated by accurate molds with high fidelity of real airplane One of the Best Looking Jet in the market Excellent stability and aerobatic capability Detailed Body Structure High roll rate Digital Proportional Motor Speed Control Crash Resistant Construction Easy to Fly, Easy to Control, Super stable for beginner Slow Speed Flying Capable, Good for Beginner Suitable for both beginners and experienced pilots Best choice for Beginner - Advanced pilots Approximately 15 minutes flight time on each charge - Optional Li- poly battery |
|
|
Exceed RC F-35 EDF Replacement Parts: Main Wing (Left) $10 Exceed RC F-35 EDF Replacement Parts: Main Wing (Left) |
|
|
Exceed RC F4-E Replacement Parts (Blue): Main Wing (Left) $10 Exceed RC F4-E Replacement Parts (Blue): Main Wing (Left) |
|
|
Exceed RC F4-E Replacement Parts (Blue): Main-Wing (Right) $10 Exceed RC F4-E Replacement Parts (Blue): Main-Wing (Right) |
|
|
Exceed RC F4-E Replacement Parts (Green): Main Wing (Left) $10 Exceed RC F4-E Replacement Parts (Green): Main Wing (Left) |
|
|
Exceed RC F4-E Replacement Parts (Green): Main-Wing (Right) $10 Exceed RC F4-E Replacement Parts (Green): Main-Wing (Right) |
|
|
Exceed RC Red Viper F-18C: Main Wing Left $15 Exceed RC Red Viper F-18C: Main Wing Left |
|
|
Exceed RC Red Viper F-18C: Main Wing Right $15 Exceed RC Red Viper F-18C: Main Wing Right |
|
|
RC Lander Hawker Hunter 70mm EDF RC Jet w/ Retractable Landing Gear $449.95 RCLander Hawker Hunter 70mm RC Electric Ducted Fan EDF Jet Features RCLander Hawker Hunter 70mm RC Electric Ducted Fan EDF Jet Precision Molded EPO Airframes With Outstanding Detail & Scale Appearance Full set door system Perfect for all levels: beginners, middle-level users, or experienced pilots. Beautiful design and great details: resembling real plane Factory-finished for aggressive fighter jet appearance. Construction: Lightweight, strong, and crash resistant. Easily take off: can depart from either ground or hand effortlessly. Powerful ducted fans with brushless motors and brushless ESC and strong wing designed for smooth airflow: providing exceptional stability, and great ease to control and fly even with wind Full function control of the plane: Throttle, Aileron control, Rudder, Elevator, flaps, Door operate System Fuselage: Durable pre-colored foam fuselage, wings and tail Specifications Wingspan: 1050mm / 41.3" Length: 1000mm / 39.3" Weight: 1000g/38.8oz to 1500g/52.9oz Power system: Single 70mm EDF ESC: 60A or above Functions: Throttle, Aileron control, Rudder, Elevator, flaps, Door operate System Servo: 9g X 8 Battery: 14.8V 4S 2250mah or higher Li-Polymer Radio: 6CH Package Contents RCLander Hawker Hunter 70mm RC Electric Ducted Fan EDF Jet User Manual What you need to Complete 6CH Channel Transmitter Compatible receiver Motors Servos ESC Ducted Fan Unit Lithium-polymer battery Requires: Brushless Motor, Controller, LiPo, Servos, Receiver & Transmitter Battery: 4S-2500, 4S-3300 or 4S-3700 |
|
|
4 CH F-35 Lightning II 64MM EDF 3D Aerobatic Electric Ducted Fan RC Fighter Jet ARF"Bind & Fly" (Camo) $179.95 F-35 Electric Ducted Fan Radio Control Jet ALMOST-READY-TO-FLY-VERSION without Tx+Rx & LiPo Battery Flies BEAUTIFULLY. Fast...maybe the fastest of all the 64mm EDF jobs out there, with excellent vertical performance. Very stable, but very maneuverable. I am flying off pavement, have not tried hand-launching it yet... For intermediate to advanced pilots. Features: -State of the Art Foam -Fully Proportional Elevator, Rudder and Throttle Controls -Improved Aerodynamic with innovative Wing and Fuselage Design -Durable Fuselage and Wings Construction -Easy to learn for Beginner and Fun to Fly for Experts Wingspan: 607 mm Length: 858 mm Flying Weight: 680 g Wing Area: 8.7 dm^2 Wing Load: 67g/dm^2 64mm Ducted Fan Servos Included : 3pcs 9G Servos Motor Included : 14L inner brushless motor ESC Included : 40A Brushless ESC Requirements: 4-Channel TX and Rx & 3-cell 11.1V 1300mAH LiPo Battery |
|
|
4 CH F-35 Lightning II 64MM EDF 3D Aerobatic Electric Ducted Fan RC Fighter Jet KIT Version (Camo) $99.95 F-35 Electric Ducted Fan Radio Control Jet (Kit Version - No Electronics) Flies BEAUTIFULLY. Fast...maybe the fastest of all the 64mm EDF jobs out there, with excellent vertical performance. Very stable, but very maneuverable. I am flying off pavement, have not tried hand-launching it yet... For intermediate to advanced pilots. Features: -State of the Art Foam -Fully Proportional Elevator, Rudder and Throttle Controls -Improved Aerodynamic with innovative Wing and Fuselage Design -Durable Fuselage and Wings Construction -Easy to learn for Beginner and Fun to Fly for Experts Specifications: Wingspan: 607 mm Length: 858 mm Flying Weight: 680 g Wing Area: 8.7 dm^2 Wing Load: 67g/dm^2 64mm Ducted Fan Requirements Radio System: 4-Channel TX and Rx Battery/Charger: 3-cell 11.1V 1300mAH LiPo Battery Servos: 3pcs 9G Servos Motor: 14L inner brushless motor ESC: 40A Brushless ESC |
|
|
4 CH F-35 Lightning II 64MM EDF 3D Aerobatic Electric Ducted Fan RC Fighter Jet KIT Version (Sky Grey) $99.95 F-35 Electric Ducted Fan Radio Control Jet (Kit Version - No Electronics) Flies BEAUTIFULLY. Fast...maybe the fastest of all the 64mm EDF jobs out there, with excellent vertical performance. Very stable, but very maneuverable. I am flying off pavement, have not tried hand-launching it yet... For intermediate to advanced pilots. Features: -State of the Art Foam -Fully Proportional Elevator, Rudder and Throttle Controls -Improved Aerodynamic with innovative Wing and Fuselage Design -Durable Fuselage and Wings Construction -Easy to learn for Beginner and Fun to Fly for Experts Specifications: Wingspan: 607 mm Length: 858 mm Flying Weight: 680 g Wing Area: 8.7 dm^2 Wing Load: 67g/dm^2 64mm Ducted Fan Requirements Radio System: 4-Channel TX and Rx Battery/Charger: 3-cell 11.1V 1300mAH LiPo Battery Servos: 3pcs 9G Servos Motor: 14L inner brushless motor ESC: 40A Brushless ESC |
|
|
4 CH F-35 Lightning II 64MM EDF 3D Aerobatic Electric Ducted Fan RC Fighter Jet ARF"Bind & Fly" (Sky Grey) $179.95 F-35 Electric Ducted Fan Radio Control Jet ALMOST-READY-TO-FLY-VERSION without Tx+Rx & LiPo Battery Flies BEAUTIFULLY. Fast...maybe the fastest of all the 64mm EDF jobs out there, with excellent vertical performance. Very stable, but very maneuverable. I am flying off pavement, have not tried hand-launching it yet... For intermediate to advanced pilots. Features: -State of the Art Foam -Fully Proportional Elevator, Rudder and Throttle Controls -Improved Aerodynamic with innovative Wing and Fuselage Design -Durable Fuselage and Wings Construction -Easy to learn for Beginner and Fun to Fly for Experts Wingspan: 607 mm Length: 858 mm Flying Weight: 680 g Wing Area: 8.7 dm^2 Wing Load: 67g/dm^2 64mm Ducted Fan Servos Included : 3pcs 9G Servos Motor Included : 14L inner brushless motor ESC Included : 40A Brushless ESC Requirements: 4-Channel TX and Rx & 3-cell 11.1V 1300mAH LiPo Battery |
|
|
NitroModels Zero Fighter 52 - 54" Scale Nitro Gas Radio Remote Control Warbird Airplane $99 Japan's Zero Fighter 50 Nitro Gas ARF Model RC Airplane The Mitsubishi A6M5 is a great scale airplane for anyone who likes scale flying. The kit includes a fiberglass fuselage and cowling. The wings are built with balsa material to form internal structure and covered. All covered surfaces are done in solartex cloth covering and then the whole airplane is airbrushed. All control surfaces have beveled leading edges and the control horn mounts are preinstalled. The wing is complete with CA hinges. The leading edge of the wing is pre-shaped. The kit includes full color decals. Wing span: 54 in / 1380mm Wing area: 543 sq in / 35 sq dm Flying weight: 6.1lb / 2800g Fuselage length: 45 in / 1140 mm Engine Required: 2c 0.46 cu in Radio Required: 4 channels,5 servos 4c 0.63 cu in or 5 channels,6 servos Top quality wood construction with fiberglass fuselage Comes with all hardware and accessories The Mitsubishi A6M was a light-weight naval fighter aircraft employed by the Japanese from 1940-45. More widely known by its Navy designation, Type 0 Carrier Fighter, or Zero, the plane gained a legendary reputation. A combination of excellent maneuverability and very long range made it one of the best fighters of its era. The most effective Japanese fighter of World War II was known by many names. To the Imperial Japanese Navy, it was the Type 0 Carrier Fighter, Model 52. To the U.S. Navy pilots who fought it in the skies over the Pacific, it was the "Zeke." And to the American public it was known as the Zero. By whatever name, the Imperial Japanese Navy's Zero fighter was one of the most potent warplanes of World War II and probably the best all-around carrier-based fighter of the early 1940s. The Zero's outstanding performance stemmed primarily from the fact that it weighed only 5,500 to 6,500 pounds fully loaded. For this reason the Zero was extremely maneuverable and had a fast rate of climb. At the time of its appearance in 1940, the Zero fighter has a performance package superior to any other naval aircraft in the world. Speed, range, rate of climb, maneuverability and the ability to operate from aircraft carrier decks combined to forge a seemingly invincible weapon in the hands of the Japanese Navy. In the six months after Pearl Harbor, the Sentais (fighter Groups) equipped with the A6M so dominated the sky that the Imperial Forces had conquered over 12 million square miles. Over 10,000 Rei-sen (Zero) fighters were produced by the Japanese, and it is interesting to note that that the Zero weighted only 50% of the Corsair, one of the reasons being the lack of armor plate protection for |
|
|
|
October 16th, 2005 in
RC Airplanes