RC Voltage Indicator Checker
RC Voltage Indicator Checker
 |
 RC Li-Po Battery Voltage Indicator Checker Tester 2S-6S  US $1.00
|
 RC Receiver Battery Indicator Voltage Checker US $6.25
|
_________________________________________________________________________________
|
|
Esky LCD Battery Tester w/ LCD Voltage Indicator (4-13V/DV) $19.95 Esky LCD Battery Tester w/ LCD Voltage Indicator (4-13V/DV) |
|
|
Exceed RC UBEC-3A (2-6S Lipo Input) $19.95 Product Description Model UBEC-3A (2-6S Lipo Input) Manual User Manual Accessory Preview The 3A-UBEC is a switch-mode DC-DC regulator supplied with a 2-6 cells lithium battery pack (or 5-18 cells NiMH /NiCd battery ), it outputs a consistent safe voltage for your receiver, gyro and servos. It is very suitable for RC helicopter. Compared with the linear mode UBEC, the overall efficiency of the switch-mode UBEC is much higher. 1 Specification 1.1 Output Voltage: 5V@3A or 6V@3A (Changeable with an output-voltage select switch ) 1.2 Continuous output current: 3 Amps 1.3 Input: 5.5V-26V (2-6 cells lithium battery pack or 5-18 cells NiMH /NiCd battery) 1.4 Size: 43mm*17mm*7mm (L*W*H) 1.7 Weight: 11g 2 Features 2.1 Designed with an advanced switch mode DC-DC regulator IC. 2.2 The output is powerful even working with 4 to 6 cells Lipo battery. 2.3 Battery polarity reversal protection. 2.4 A metal shield covers almost all the electronic components, and a specially made filter is attached with the output wires to significantly reduce the electromagnetic interference. 2.5 The working status is shown by an indicator (LED), lights when the output is in normal range. |
|
|
High Voltage Fan for Car ESC Fan for 1/8th RC Car ESC $4.5 High Voltage Fan for Car ESC Fan for 1/8th RC Car ESC |
|
|
7G Micro RC Servo $39.95 Specs Type: Sub-Micro, High-Speed and High-Torque Torque: 17.2 oz/in (1.17 kg. cm) @ 4.8V Speed: .12 sec/60 deg @ 4.8V Dimensions (WxLxH): (L x W x H): .90 x .45 x .94 in (23 x 12 24mm) Weight: .26 oz (7.5 g) Motor Type: Coreless Connector Type: Universal Application: Electric slow flyer to park flyer 3D airplanes, micro to mini electric helicopters and 1/18th scale onroad and offroad vehicles Voltage: 4.8-5.3V DC |
|
|
UBEC-5A-HV (High Voltage Ultimate BEC) $49.95 Product Description Model UBEC-5A-HV (High Voltage) Manual User Manual Accessory A step-down voltage regulator (6V to 5.3V) Preview The 5A-HV-UBEC is a switch-mode DC-DC regulator supplied with a 3-10 cells lithium battery pack and outputs a consistent safe power for your receiver, gyro and servos. It is very suitable for big electric RC models. Using this UBEC, the receiver can obtain the power supply directly from the main battery pack, so the additional battery pack for receiver is unnecessary. Compared with the linear mode UBEC, the overall efficiency of the switch-mode UBEC is much higher, so it can extend the working time of the receiver battery pack, and because a switch mode UBEC can significantly reduce the heat emission, it can avoid the loss of control caused by the over-heat problem which is frequently happened with the linear mode UBEC. 1 Specification 1.1 Output Voltage: 5V or 6V (Changeable with an output-voltage select jumper ) 1.2 Continuous output current: 5 Amps 1.3 Burst output current: 7.5 Amps 1.4 Input: 8V-42V (3-10 cells lithium battery pack) 1.5 Quiescent current: 20mA 1.6 Size: 48mm*27mm*9mm (L*W*H) 1.7 Weight: 30g 2 Features 2.1 Designed with an advanced switch mode DC-DC regulator IC, the max efficiency of the chip is up to 92%. 2.2 The output current is very large. 2.3 With the output short-circuit protection function. 2.4 A metal shield covers almost all the electronic components, and a filter is attached with the output wires to significantly reduce the electromagnetic interference. 2.5 With ultra-wide input voltage from 8V-42V. 2.6 Safe power on with the polarity protection function. If the input polarity is not correct, the UBEC can't work, but it |
|
|
ESky Charger for Li-Polymer Batteries $29.95 LiPoly Charger (AC Adapter Sold Seperately) Our Low Price Lithium Polymer Batteries: 7.4V LiPo 11.1V LiPo 14.8v LiPoly 18.5V LiPoly 22.2V LiPoly 【Specification:】 (1).Input Voltage：DC11.5~13.5V (2).Input Current：1500 mAh (3).Single battery full voltage：4.2V±0.05V (4).Minimum chargeable battery voltage: 1.25V (the charger will indicate that there no battery if single cell voltage lower than this parameter) (5).The restoration time of defective battery: 3 MIN (If restoration still can not be finished when overtime, indicate that the battery has been damaged) (6).Practicable charge current: 750 mAh (7).Compatible chargeable battery: 11.1V 1000mAh；7.4V 800mAh Li-Polymer battery (8).Final Voltage: 8.4 ±0.1V 2 cells ; 12.6V ±0.1V 3cells 【Charge process:】 1.Connect the charger with power, then the red power indicator lights up, which indicates that the power connection is normal. 2.Connect the 2 cells or 3cells Li-polymer battery with charging ports of charger respectively or simultaneously, then the green charging indicator flashes and it indicates the battery is on charge. 3.Green indicator stops flashes shows that the battery is full. |
|
|
UBEC-8A (Ultimate BEC) $29.95 Product Description Model UBEC-8A (Large Current BEC) Manual User Manual Accessory A step-down voltage regulator wire (6V to 5.3V) Preview The 8A-UBEC is a switch-mode DC-DC regulator supplied with a 2-3 cells lithium battery pack and it outputs a consistent safe voltage for your receiver, gyro and servos. It is very suitable for nitro powered RC helicopter (bigger than 30 class) and big fixed-wing aircraft. Compared with the linear mode UBEC, the overall efficiency of the switch-mode BEC is much higher, so it can extend the working time of the receiver battery pack, and because a switch mode UBEC can significantly reduce the heat emission, it can avoid the loss of control caused by the over-heat problem which is frequently happened with the linear mode UBEC. 1 Specification 1.1 Output Voltage: 5V or 6V (Changeable with an output-voltage select switch ) 1.2 Continuous output current: 8 Amps 1.3 Burst output current: 15 Amps 1.4 Input: 6V-12.6V (2-3 cells lithium battery pack) 1.5 Quiescent current: 60mA 1.6 Size: 42mm*39mm*9mm (length*width*height) 1.7 Weight: 36g 2 Features 2.1 Designed with an advanced switch mode DC-DC regulator IC. 2.2 The output current is very large. 2.3 With the output short-circuit protection function. 2.4 A metal shield covers almost all the electronic components, and a filter ring is attached with the output wires to significantly reduce the electromagnetic interference. 2.5 Automatically detects the number of the lithium battery pack (2 cells or 3 cells). 2.6 Shows the battery capacity with 4 indicators (LEDs). 2.7 Shows the working status with an indicator (LED), lights when the output is in normal range. 2.8 There are 2 output leads to reduce the resistance when connecting the UEBC to the receiver. |
|
|
NIMH Charger 110 Voltage HG027 For Hughes 300 Rc Helicopter $19.99 NIMH Charger 110 Voltage Part# HG027 For Hughes 300 Rc Helicopter |
|
|
MKS GY-292 Professional Head-Locked Gyro for RC Helicopter $79.95 Very small gyro. nice price for the quality! Easy setup like Futaba 401.Good gyro for Novice rc helicopter pilot.Dual-rate remote to switch control function Input Voltage?FDC 4.2 ~ 7.2 V Current Consumption?F33 mA Size?F20 x 20 x 10.5 mm Weight?F7 g External VR1(GAIN) switch set brake(delay control function ) External VR2(REV) set REV(reverse)function |
|
|
12A Brushless RC Speed Controller [Volcano Series] $79.95 Exceed-RC's Volcano Series brushless ESC are micro processor controlled and will work with all types of brushless motors. The Volcano Series brushless ESC can be used in airplanes, sailplanes, helicopters, or 3D helicopters. The controllers come pre-programmed and are ready to use when you receive them. Additional controller adjustments are available and can be accessed and adjusted with your transmitter and program card [ Features Specifications Instruction Manual Buy It Now ] Innovative Discharge Monitoring and Protection Design for real time battery pack monitor Multiple protection features: Low-voltage cut-off protection, over-heat protection, throttle signal loss protection 3 start modes: Normal / Soft / Super-Soft, compatible with fixed-wing aircrafts and helicopters Throttle range can be configured and is fully compatible with all transmitters currently available on the market Smooth, linear and precise throttle response Separate voltage regulator IC for the microprocessor Supported motor speed (Maximum): 210000 RPM (2 poles), 70000 RPM (6 poles), 35000 RPM (12 poles) Our pocket-sized Program Card can be purchased separately to provide easy programming to the ESC at the field. With a program card, you can activate the music playing function on the ESC Model #: Volcano-12 (07E01) Cont. Current: 12A Burst Current (>10s): 15A BEC Mode: Linear BEC Output: 5V/2A Li-ion/Li-poly: 2-4 Ni-MH/Ni-Cd: 5-12 Prgrammable: Yes Weight: 13g Size: 34*24*10 |
|
|
8~9 G Micro RC Servo $29.95 SPECIFICATIONS 1. Operating Voltage:4.8V DC-6.0V DC 2. Operating Speed:0.12sec/60°at 4.8V 3. Output Torque :﹥1.3kgf.cm(18.2 oz. In) at 4.8V 4. Weight:8.0g (0.28oz) 5. Size:22.8*11.5*20.8(0.9*0.45*0.82in) 6. Servo horns not included |
|
|
SG90 9g Mini RC Hobby Servo for Helicopter $29.95 Specifications: T-Pro Mini Servo SG-90 -Dimensions: 22.6 x 21.8 x 11.4mm -Weight: 9g -Operating Speed (4.8V no load) : 0.12sec / 60 degrees -Stall Torque (4.8V): 10.2oz / in ( 1.98 kg/cm ) -Temperature Range: -30 to +60 Degree C -Dead Band Width: 4usec -Operation Voltage: 3.5 - 8.4Volts |
|
|
3-Channel Dolphin RC Helicopter 100% RTF $79.95 The New 3 Channel Mini Micro Indoor Helicopter can fly easily right out of your hand, with the new technology of infrared remote control that control up to 3 different helicopters. Three channels is better than two channels and with this extra function, you can fly the helicopter left, right, forward, and reverse. Control easily with the new design remote control with built in charger system right out of the remote. Just put in 6 AA batteries( not included) in the 3 channel remote control and turn on the helicopter and your having the most fun you will experiences. Unique 3-channel wide infrared remote control (typical mini helicopters only feature 2-channel controls) - Helicopter features built-in rechargeable lithium battery (recharged by remote controller) - Remote controller powered by 6 x AA batteries (sold separately) - Wireless range: 6 meters radius (manufacturer rated) - Recharge time: ~15-20 minutes - Flight time: ~5 minutes / charge Main Rotor Diameter: 5.25inches (130mm) Length 6.5inches (170mm) excluding rotors. Rear Rotor diameter 1.25inches (30mm) Helicopter weight: Only 10g, including Li-Poly battery Rechargeable Flight Battery: High capacity integral Lithium Polymer battery Charger: Integral Transmitter/Charger supplied with LED indicator/Auto shut off. Simply plug in and charge, with easy to use connections Flight duration: 7 to 10 minutes Charge time: 15-20 minutes for full charge Ready To Run: Supplied completely assembled and ready-to-fly, with pre-installed 3 Channel Proportional Infra Red Control System Range: Up to 100 feet (30 meters). Frequency: Infra Red Control System - Bands A & USB allow up to two models to be flown at the same time Helicopter 3 CH Proportional Control System Extra Tail Blade 3.7V Li-Poly Battery Built in Charger English Manual |
|
|
Exceed RC BlueRay 450PE Replacement Parts: Professional Headlock Gyro $34.95 Pattern : PIZEO Control Weight : 4.8g Size(mm) : 20*20*10.5mm Input Voltage : 4 ~ 6V Gain : 1 / 2 CH Apply to electric heli and robot |
|
|
10-amp Esky High Quality RC Airplane Electronic Speed Controller $19.95 Now electric flight fans have a new choice when it comes to high-performance speed controls for their aircraft. NitroPlane's new selection of 5-, 10-, 20- and 30-amp ESCs are loaded with the kinds of features they demand at a very affordable price Features For use with Speed 400 motors and below Proportional forward only (no brake) 10-amp continuous current Thermal overload protection Auto cut-off with BEC Pre-wired with connectors [Products description]: Item Size(L*W*H) Weight(g) BEC POWER CUT OFF VOLTAGE BEC BEC POWER Reset con.Current Battery Range mm EK2-0604 38*17*7.5 8 √ 4v √ 1.5A/5V throttle lowest 10A 5-10 Cells |
|
|
30-amp Esky High Quality RC Airplane Electronic Speed Controller $26.95 Now electric flight fans have a new choice when it comes to high-performance speed controls for their aircraft. NitroPlane's new selection of 5-, 10-, 20-,30-,40-, and 50-amp ESCs are loaded with the kinds of features they demand at a very affordable price. The 30-amp ESC is the answer to your electronic speed controller needs for aircraft such as Hangar 9's Aspire(tm) EP or E-Flite's Odyssey EP. It can handle up to 25 amps of continuous current and is best suited for speed 400 or 550 electric motors. It comes pre-wired with a Tamiya-style connector and bullet-style motor connector. The 30-amp ESC also features an arming switch, thermal protection, and polarity protection. Its auto-shutoff feature senses when battery voltage is low and cuts power to the motor so enough power is available to the control surfaces for a safe landing Features For use with Speed 400 motors and 550 Proportional forward only (no brake) 30-amp continuous current Thermal overload protection Auto cut-off with BEC Pre-wired with connectors [Products Sepcs]: Item Size(L*W*H) Weight(g) BEC POWER CUT OFF VOLTAGE BEC BEC POWER Reset con.Current Battery Range mm EK2-0601 38*17*7.5 10 √ 4v √ 1.5A/5V throttle lowest 30A 5-10 Cells |
|
|
40-amp Esky High Quality RC Airplane Electronic Speed Controller $29.95 Now electric flight fans have a new choice when it comes to high-performance speed controls for their aircraft. NitroPlane's new selection of 5-, 10-, 20-,30-, 40- and 50-amp ESCs are loaded with the kinds of features they demand at a very affordable price. The 40-amp ESC is the answer to your electronic speed controller needs for aircraft such as Hangar 9's Aspire(tm) EP or E-Flite's Odyssey EP. It can handle up to 25 amps of continuous current and is best suited for speed 400 or 550 electric motors. It comes pre-wired with a Tamiya-style connector and bullet-style motor connector. The 40-amp ESC also features an arming switch, thermal protection, and polarity protection. Its auto-shutoff feature senses when battery voltage is low and cuts power to the motor so enough power is available to the control surfaces for a safe landing Features For use with Speed 400 and 550 motors Proportional forward only (no brake) 40-amp continuous current Thermal overload protection Auto cut-off with BEC Pre-wired with connectors [Products Specs]: Item Size(L*W*H) Weight(g) BEC POWER CUT OFF VOLTAGE BEC BEC POWER Reset con.Current Battery Range mm EK2-0602 38*17*7.5 11 √ 4v √ 1.5A/5V throttle lowest 40A 5-10 Cells |
|
|
50-amp Esky High Quality RC Airplane Electronic Speed Controller $32.95 Now electric flight fans have a new choice when it comes to high-performance speed controls for their aircraft. NitroPlane's new selection of 5-, 10-, 20-,30-,40- and 50-amp ESCs are loaded with the kinds of features they demand at a very affordable price. The 50-amp ESC is the answer to your electronic speed controller needs for aircraft such as Hangar 9's Aspire(tm) EP or E-Flite's Odyssey EP. It can handle up to 25 amps of continuous current and is best suited for speed 400 or 550 electric motors. It comes pre-wired with a Tamiya-style connector and bullet-style motor connector. The 50-amp ESC also features an arming switch, thermal protection, and polarity protection. Its auto-shutoff feature senses when battery voltage is low and cuts power to the motor so enough power is available to the control surfaces for a safe landing Features For use with Speed 400 and 550 motors Proportional forward only (no brake) 50-amp continuous current Thermal overload protection Auto cut-off with BEC Pre-wired with connectors [Products Specs]: Item Size(L*W*H) Weight(g) BEC POWER CUT OFF VOLTAGE BEC BEC POWER Reset con.Current Battery Range mm EK2-0603 38*17*7.5 12 √ 4v √ 1.5A/5V throttle lowest 50A 5-10 Cells |
|
|
3 Channel Indoor Dolphin Silver Version Radio Controlled RC Helicopter $79.95 The New 3 Channel Mini Micro Indoor Helicopter can fly easily right out of your hand, with the new technology of infrared remote control that control up to 3 different helicopters. Three channels is better than two channels and with this extra function, you can fly the helicopter left, right, forward, and reverse. Control easily with the new design remote control with built in charger system right out of the remote. Just put in 6 AA batteries( not included) in the 3 channel remote control and turn on the helicopter and your having the most fun you will experiences. Unique 3-channel wide infrared remote control (typical mini helicopters only feature 2-channel controls) - Helicopter features built-in rechargeable lithium battery (recharged by remote controller) - Remote controller powered by 6 x AA batteries (sold separately) - Wireless range: 6 meters radius (manufacturer rated) - Recharge time: ~15-20 minutes - Flight time: ~5 minutes / charge Main Rotor Diameter: 5.25inches (130mm) Length 6.5inches (170mm) excluding rotors. Rear Rotor diameter 1.25inches (30mm) Helicopter weight: Only 10g, including Li-Poly battery Rechargeable Flight Battery: High capacity integral Lithium Polymer battery Charger: Integral Transmitter/Charger supplied with LED indicator/Auto shut off. Simply plug in and charge, with easy to use connections Flight duration: 7 to 10 minutes Charge time: 15-20 minutes for full charge Ready To Run: Supplied completely assembled and ready-to-fly, with pre-installed 3 Channel Proportional Infra Red Control System Range: Up to 100 feet (30 meters). Frequency: Infra Red Control System - Bands A & USB allow up to two models to be flown at the same time Helicopter 3 CH Proportional Control System Extra Tail Blade 3.7V Li-Poly Battery Built in Charger English Manual |
|
|
41G T-Pro SG5010 High Torque Powerful Radio Controlled RC Servo for Scale Airplanes, Boats, and Cars $39.95 41G SG-5010 Professional High Speed and Torque Coreless Servo Specifications: Professional High Speed SG-5010 Servo Dimensions: 1.57" x 0.79" x 1.44" (40 x 20 x 36.5mm) Weight: 1.44oz (39g) Operating Speed (4.8V no load) : 0.14sec / 60 degrees Operating Speed (6.0V no load) : 0.11sec / 60 degrees Stall Torque (4.8V): (8 kg/cm) (110oz/in.) Stall Torque (6.0V): (11kg/cm) (156oz/in.) Temperature Range: -30 to +60 Degree C Dead Band Width: 4usec Operation Voltage: 3.5 - 8.4Volts Features: - Coreless Motor - Double Boll Bearing - Light Weight - Less Noise - Connector Wire Length 300mm |
|
|
|
3S battery beeper
March 1st, 2005 in
RC Airplanes