RC Vintage Model Airplane
RC Vintage Model Airplane
 |
 Vintage J-3 CUB Scale RC or UC Model Airplane Plan  US $11.95
|
_________________________________________________________________________________
|
|
RC Model Airplane #6 $19.95 This pre-painted scale model pilot is design for arf rc planes. It is made out of light plastic material. |
|
|
RC Airplane Joystick Flight Simulative Transmitter System $149.95 RC Airplane Joystick Flight Simulative Transmitter System |
|
|
Airplane RC Crystal Set for Channel 4 $19 Airplane RC Crystal Set for Channel 4 |
|
|
5pcs SG90 9g Mini RC Hobby Servo for RC Helicopter & Airplane $23.7 5pcs SG90 9g Mini RC Hobby Servo for RC Helicopter & Airplane |
|
|
4pcs SG90 9g Mini RC Hobby Servo for RC Helicopter & Airplane $19.5 4pcs SG90 9g Mini RC Hobby Servo for RC Helicopter & Airplane |
|
|
RC Airplane Scale Pilot Model #1 $19.95 This pre-painted scale model pilot is design for arf rc planes. It is made out of light plastic material. |
|
|
Military EDF Predator UCAV 101mm Electric Ducted Fan RC Airplane $119 The EDF Predator UCAV from Nitro Planes is a large fiberglass jet model with sheeted wings. It comes complete with landing gear, fiberglass canopy, missiles, and all hardware. The model can be powered by a 90mm to 101mm ( 3.5" to 4" ) EDF unit. EDF Predator UCAV 101mm Electric Ducted Fan Airplane Top Features Top quality wood construction with fiberglass fuselage Comes with all hardware and accessories Specifications Wing Span: 47.2 in / 1200mm Wing Area : 521 sq in / 33.8 sq dm Flying Weight : 6.6 lb / 3000 g Fuselage Length : 58.7 / 1490 mm Electronics Required : 4 Channels Radio Transmitter 5 Servos EDF : 101 mm / 4 in Brushless Motor : D36 x L 36 mm 2000 KV Speed Controller : 22.2 V ; 85A Li-poly Battery : 4000 mAh 25 C 22.2 V Click here for UCAV Review/Build Thread The fuselage and parts come well secured in the custom box. All the parts are covered in plastic or bagged. The control surfaces arrive attached with hinge material but need to be CA'ed in place after alignment. The fiberglass canopy is pre-finished and only needs the latch mechanism attached. The landing gear are fixed with a steerable nose wheel assembly. Two sheets of finishing decals are supplied and the 7-page manual, although sparse, provides sufficient photos and text to complete the model by an experienced assembler. Photos A closer look at the fuselage reveals the size, quality finish, construction techniques, and high level of pre-assembly. The T-nuts are already installed, and glued in place, for the gear mains and steerable nose wheel assembly. The battery and servo trays are also pre-installed. Photos Click here for UCAV Review/Build Thread |
|
|
3-Channel Slope Diver RTF Radio Remote Controlled RC Electric Airplane $64.95 Brand New, Huge Radio Controlled Aircraft - Soarer Full 3 channel Radio control equipment included and installed !!! *BRAND NEW* ADVANCED 3-Channel R/C Airplane + a Full 3-CH Radio Control Transmitter completed with a Full set of 3 Channel FUTABA Attack 2ER Japanese telecontrol equipment to realize excellent control !!! NEW IN BOX !!! READY TO FLY IN MINUTES One of Our top of the range ready to fly model aircraft and very popular ? the soarer is an acrobatic motor driven glider, it poses fantastic ?stay up? properties and in the right weather conditions can stay flying for an hour with the right pilot!! It uses full 3 channel radio control equipment which is easily moved to other models Although still very stable and easy to fly I would recommend this as your top choice for your second model. The Soarer has opened a whole new world of soaring excitement for modellers everywhere by giving them a beautifully crafted electric-powered sailplane that goes together in about one hour including charging the battery, all that's left for a modeller to do now is install the transmitter batteries, bolt on the tail, slide together the wing halves, charge the included Ni-Cd battery, and fly. 1. Wingspan: 42 inches 1100mm 2. Length: 32 inches 820mm 3. Weight: 15.87 ounces 500g 4. Power Supply (flight pack): 8.4V 600mAh NiMh (7 cell) 8.4V 600mAh NiMh (7 cell) 5. Radio Equipment: Full 3 channel SD-27 Mhz. Full 3 channel SD-27 Mhz. 6. Motor: 380 380 7. Distance of Control: 1580 feet 500m |
|
|
Cheap Electric RC Airplane 236 $48.88 236 mini rc airplane is great for pilots of all ages. This remote control plane is designed to be an easy air plane to fly, which makes it great for beginners and those looking for a trainer airplane. RTF (Ready-To-Fly) radio control plane is a full function R/C plane that can go forward, left or right. Made of molded and plastic and foam making it a super tough lightweight airplane. This ducted fan RC airplane also comes with altitude and rotor speed control. Features: Altitude and Rotor Speed Control Ducted Fan Plane Ergonomic 2 CH Remote Control Controller Doubles as a Quick Charger Super Tough Lightweight Airframe Rechargeable Battery All Molded Plastic and Foam Construction Specifications: Length: 28 in. Wingspan: 24 in. Maximum Operating Speed: 30 MPH Maximum Operating Range: 460 ft. Flight Time: 5-6 min. Requires: Controller: 8 AA Batteries (Click one of the links below to see related RC products): Model: RC Airplanes Type: Electric RC Airplanes |
|
|
Scale RC Airplane Pilot #2 $19.95 This pre-painted scale model pilot is design for arf rc planes. It is made out of light plastic material. |
|
|
ASP Sanye 2 Stroke 12A Glow Engine with Muffler for RC Airplane $35.65 Model CC Cylinder Bore (mm) Stroke (mm) Prop Prefer RPM Weight (g) 12A 2.11 14.00 13.7 7x4 3000-19000 196 |
|
|
130-MOTOR for DragonFly 2-CH RC Airplane $3 130-MOTOR for DragonFly 2-CH RC Airplane |
|
|
3pcs T-Pro SG90 9g Mini RC Hobby Servo for RC Helicopter & Airplane $14.7 3pcs T-Pro SG90 9g Mini RC Hobby Servo for RC Helicopter & Airplane |
|
|
de Havilland Tiger Moth 120 - 76" ARF Nitro Gas Radio Remote Control RC Airplane $199 de Havilland D.H Tiger Moth - 120 Giant Scale Radio Remote Control RC Bi-Plane ARF RC Bi-Plane "A charming touring plane that's almost ready to fly." Derived from the highly successful D.H. 60 Moth series of civilian aircraft that included the famous Gypsy Moth, the de Havilland D.H. 82A Tiger Moth is the quintessential British biplane trainer. The Tiger Moth has long been popular with modelers, and now with our low low price, you can, too, be own a part of this fascinating history. Our Tiger Moth 120 is a Almost-Ready-to-Fly model, built with all balsa and plywood. All parts are precovered with our quality film coating material. IMAA-legal dimensions contribute to its realistic flight characteristics and enhance the plane's incredible attention to detail. Whether you're a serious scale aircraft builder or an aspiring r/c sport flier?or both?you will be thrilled to own and pilot one of the world's most beautiful plane! Top quality balsa and plywood construction All wood constructions with fiberglass parts Trimmed and painted cowling by fuel proof paint Hand iron-on color film covering Comes with all hardware and accessories Wing span: 76in / 1930mm Wing area: 1830sq in / 118 sq dm Flying weight: 9.0lb / 4086g uselage length: 65.5 in / 1664 mm Engine Required: 4c 1.40cu in Radio Required: 4 channels,5 servos High-quality hardware is included for convenience. Best suited for the power and realistic sound of a 4-stroke engine, but will also fly well on a 2 cc engine within the recommended range. Dual aileron servos simplify assembly, and deliver more precision and authority to flying maneuvers. Ready for flight in as little as 20-25 hours. Most of the interlocking, all-wood parts have already been assembled into easy-to-assemble sections FLYING Takeoffs for the Tiger Moth 120 are very easy, even in slight crosswinds, and require very little rudder correction. Scale takeoffs are best achieved by slowly advancing the throttle and holding a bit of up-elevator as the model starts to roll. Even with only a lO mph headwind, the model will lift off within a few feet when you apply full power. Turns require a bit of coordinated rudder, especially during the climb-out. The model is capable of amazingly slow flight. Though not dramatic, deployment of the leading-edge slats enhances slowspeed control. The Tiger Moth could never be mistaken for a jungmeister, but it is nevertheless quite capable of many aerobatic maneuvers. Really nice loops, stall turns and wingovers are all easily within its capability, though its roll performance leaves something to be desired. Even with differential aileron and the judicious use of the rudder, an alarmingly slow barrel roll is the best that I can achieve. The Tiger Moth was very popular back in the days, and its work has inspired many replicas of its kind. Now NitroModels is proud to bring you one of the b |
|
|
4-CH CMP Fairchild PT-19 40 - 63" Nitro/Electric Radio Controlled Fiberglass RC Airplane Kit $139.95 RADIO CONTROLLED 40~50 EP/GP SCALE AIRPLANE The Fairchild ARFPT-19 was a USA primary trainer aircraft that served with the United States Army Air Forces during World War II. The CMP model replicates this well-known aircraft with a full built-up construction, comes nicely covered and 90% factory built. Wingspan 1600mm Length 1250mm Weight 2.5~2.6 kg Wing Loading 63~66dm/2 Airfoil Naca 2415 Wing Area 39.5 dm/2 Radio Control 4 Ch 3 Servos purchase separately Motors 40~50 purchase separately ESC 45~60 purchase separately Pre-painted fiberglass engine cowl. (Pilot figure to be purchased separately) Compatible for both glow and electric power with easy set-up. Nicely covered tailplane and rudder with easy set-up. Featuring a very scale cockpit. All details and panel lines come ready printed on the covering. The opening design gives a massive compartment for the EP system. Large compartment that provides plenty of room for engine, fuel tank & etc., too. Two different mounting boxes are included with kit, make your own choice of flying glow or electric! All the small details are printed on the covering to enhance realistic look. Optional anti-vibration scale undercarriage. (This item is to be purchased separately under option) Pre-painted fiberglass undercarriage house. (Scale undercarriage to be purchased separately) Perfect replica of the well-known Fairchild PT-19. Full built-up construction results in a light but strong model that gives responsive and steady control. The kit comes with nicely finished components (including a 75mm plastic wheel, a 4mm wire landing gear and two mounting boxes). Very scale anti-vibration metal undercarriage, efficiently lowers the tendency to spring and gives steady landings. (This item is to be purchased separately). 68mm metal wheel, strong and durable that gives smooth taxi. (This item is to be purchased separately). Scale WWII pilot figure. (Pilots) (This item is to be purchased separately). |
|
|
Scale RC Airplane Woman Pilot #3 $19.95 This pre-painted scale model pilot is design for arf rc planes. It is made out of light plastic material. |
|
|
CMP Zero Fighter 50cc - 80" ARF Nitro Gas Radio Remote Controlled RC Airplane New! $299.95 The Mitsubshi A6M5 52 with wingspan of 2100mm is the biggest brother from the CMPro Japanese Fighter Series. This model, well designed for 40~50cc gas engines, features a fiberglass molded fuselage and painted wing panels. The attention to detail results in an extremely realistic model that flies as look as it looks. Wingspan 2100mm Length 1700mm Weight 6.2~6.5 kg Wing Loading 77~81 dm/2 Airfoil Naca 2415 Wing Area 80 dm/2 Radio Control 5~6 Ch 8~9 Servos purchase separately 2 Strok Engine 40~50 purchase separately The whole aircraft is painted in a matt finish which greatly enhances its scale features. A fixed undercarriage is included while optional retracts fitting is also available. Decals come ready applied and clear coated ? that doesn?t only make the kit more durable but shortens building time as well. A carbon fiber wing tube is included with kit. |
|
|
Giles 202 - 50 - 1400mm Nitro Gas Radio Remote Controlled RC Airplane Aerobatic Aircraft $99 The 50 sized Giles 202 features a stunning color scheme. The new & fresh style of colors breaks the traditional covering and makes this aircraft one of a kind. This kit features carbon fiber landing gear which is durable, light and strong. This kit also comes with a PVC canopy, 300cc fuel tank, 55mm wheels, pushrod and complete hardware. The fuselage and tail plane are molded in one-piece to strengthen the model and save weight. Only a few simple tasks and you can get this beauty in the air. |
|
|
Electric RC Plane Yellowbird AirPlane RTF $41.97 The remote control airplane is a package of flying fun. Not only is everything you need included (except AA batteries for the transmitter) but the assembled model is a beautifully docile flyer. It uses twin motors for power and steering. At full power, both motors run at the same speed -- when you input a turn, one of the motors slows down. No moving control surfaces, no trimming; what could be easier? Even people who have never before held a transmitter can fly these planes. Have a blast flying the plane around the park or field. The Airplane is packed with high-tech electronics and engineering innovation yet is quite easy to assemble and to get into the air. The Airplane is a great all-around R/C plane that is fun to use by new flyers as well as experts alike. Rechargeable battery included. Features Motor-driven remote-controlled glider features a shock-resisting plane nose design made by plastic injection molding process. Elegant in appearance and excellent in the ability to resist air crashes. It boasts of thrice-folded wings with a big span ratio, V-shaped tail wings and good performance in glide and circular motion. It can dwell in the air for over 15 minutes. Fly as high as 300 meters or above. (Click one of the links below to see related RC products): Model: RC Airplanes Type: Electric RC Airplanes |
|
|
HobbyWing C-Platinum-70A-HV-OPTO-V1 Brushless ESC for 600 RC Heli and Giant Scale Airplane $99 Model Platinum-70A-HV-PRO Manual User Manual Preview Platinum-70A-HV-PRO ESC belongs to Hobbywing's "Platinum" series products line, it is the most significant top-class product for aircraft and helicopter. 1 Typical Applications 1.1 Very powerful for 600 class helicopter (Working with 8 or 10 cells Lipo battery) 1.2 Very powerful for huge scale aircraft such as F3A 2 Specification 2.1 Output: Continuous 70A, burst 105A up to 10 seconds. 2.2 Input Voltage: 5-12 cells lithium battery or 15-36 cells NIMH battery. 2.3 BEC: None. 2.4 Control Signal Transmission: Optically coupled system. 2.5 Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: BrushLess Motor) 2.6 Size: 70mm (L) * 34mm (W) * 16mm (H). 2.7 Weight: 82g. 3 Features 3.1 High performance microprocessor brings out the best compatibility with all kinds of motors and the highest driving efficiency. 3.2 Wide-open heat-sink design to get the best heat dissipation effect. 3.3 With 3 types of start mode: Normal / Soft / Very-Soft, compatible with aircraft and helicopter. 3.4 Smooth, linear, quick and precise throttle response. 3.5 The throttle signal is transfered through optically coupled system to avoid the electromagnetic interference. 3.6 Multiple protection features: Low-voltage cut-off protection / Over-heat protection / Throttle signal loss protection. 3.7 Perfect governor mode for helicopter. 3.8 The firmware of the ESC can be updated through the USB adapter on the Professional LCD Program Box. 3.9 User programmable. Several kinds of program methods are supported: transmitter, digital LED program card, advanced professional LCD program box, PC software. Very easy to program the ESC at home or at the flying field. |
|
|
|
FLIGHT OF VINTAGE PLANE
September 2nd, 2005 in
RC Airplanes | tags: airplane, aviation, freeflight, history, model, rc, video