RC Used Fox Bicycle
RC Used Fox Bicycle
 |
No items matching your keywords were found.
_________________________________________________________________________________
|
|
Exceed RC 3-Channel J3 Piper Cub EP Electric RC Airplane 100% Ready-to-Fly *New* THE BEST TRAINER!!! $119 Exceed RC's SD J3 Grasshopper Scale RC Plane 1:10 SCALE READY TO FLY Electric Powered RC Airplane, Brand New! Ready to fly RC with amazing performance. Complete with 3 channel C&F RC, 9 gram micro servos, rechargeable battery and charger installed. Even the pushrods and control surface horns are fitted! Factory built. Just takes minutes to assemble. You can even remove the RC and use it in other models! What a great investment in fun!! Piper Cub J3 Beginners Guide Part 1 ' Piper Cub J3 Beginners Guide Part 2 The J3 CUB 3 Channel has successfully trained thousands of newbie radio controlled pilots worldwide. You'll be flying within minutes of receiving this fully built airplane enjoying over 12 minute flight times on a single charge thanks to our new improved NiMH battery and ball bearing gear drive system. Equipped with a powerful speed electric motor, which starts with a push of a button, the J3 CUB is capable of take-offs from the ground with its huge powerful motor and wide wingspan. Battery Operated 380 Motor Plane Ready to Fly, assembly can be done in 10 mins Digital Proportional Speed Controller Slow Speed Flying Capable, Good for Beginner Shock Resistant Reinforced Foam Fuselage and Strong Wings 2 X 18g micro servo for Rudder and Elevator Control R/C Set included, Complete 3 Channel Control including Complete Left/Right Control by Rudder Complete Elevator Control Digital Proportional Motor Speed Control Knob Superb Quality--Simply The Best RTF Plane you can find Up to 300Maltitude, over 15 mins flight time Powered by 8.4V NIMH re-chargeable battery (110v adaptor included) Can Fly as a Glider (without Motor Power) Brand NEWAll tools required are included for you Assembly take less than 20mins Best Looking Plane on the market Data Sheet: Ready to fly (RTF) with battery charger and RC! Includes REAL RC equipment which can be used in other models! Wing span - 37.5 inches (95.5cm) Length - 28.8 inches (73cm) Wing area - 13.7dm2 Assembly is a snap! With no tools required, you can be up and flying within minutes of opening the box! Highlighted features for this airplane Transmitter 3 Channel Radio Controller features: Left/Right Control Elevator Control Digital Progressive Motor Speed Control Kno |
|
|
Walkera 4G3 Micro Metal 3D 6-Channel Aerobatic RC Helicopter w/ 2601 2.4GHz RC Transmitter $499.95 The Walkera 4G3 2.4GHz 6 channel Dragonfly helicopter comes packaged with everything needed and it is ready to fly right out of the box. Walkera HM 4G3 2.4G Metal Edition is a new generation palm size helicopter equipped with 2.4G advanced radio system and metal upgrades. To compare it with other palm size helicopters, 4G3 offers more stable, silence and smoother flight. This is a micro 3d flying miracle. Perform all the tricks of a larger helicopter indoors with this micro helicopter. It is not a 2-Channels RC Helicopter Toy. It is a serious RC helicopter for players from intermediate to experts. Trust me; this is the best Micro Helicopter Ever! If you can handle a helicopter with tail blade, you will love it. Most helicopter testers can't resist the temptation to this amazing micro helicopter! When we want to dazzle our clients, this is the helicopter we use to perform tricks for them indoors. Improvements on the 4G3 over the 4#3 - 4G3 is about 60cm in longer in length - Basically, it is about 90% different from 4#3 - 3D Flying capable - Metal rotor head already installed - Using small gear tooth, quieter and smoother than original 4#3 Features: Compact 90° swashplate structure is adopted and easy-to-be-mounted parts like servo are used; Brushed motors offer powerful drive; Ultra mini indoor 3D mode broke the concept of space limitation; Small size helicopter but with full functions of big one; Super mini but super precision; Equipped with high performance motor, the flight time will be up to 7 to 8 minutes at 3.7V 400mAh LiPo battery pack, depending on your flight mode. 4-in-1 receiver includes the functions of both Servo Extent Adjustment and Built-in Gyro Sensitivity Adjustment; High volume Lithium polymer at 3.7V 400mAh provides 7- to 10-minute flight after fully charged, depending on your flight; The latest single-cell LiPo technology is CREATIVELY used in this size helicopter in the world. It features friendly environment and energy-saving concept; The usage of 2.4G technology is prompter in reaction, more sensitive in operation, and stronger in anti-interference. Specifications: Overall Length: 273 mm Tail Motor: 0716R (Strong magnet brush motor) Main Rotor Diameter: 302 mm Tail Rotor Diameter: 58 mm Drive Motor: 1225FE33 (Strong magnet brush motor) Transmitter: WK-2601 Battery: 3.7V 400mAh Li-Po Gyro: Built-in Receiver: RX-2605 Servo: WK-02-1 / weight 3.18g / speed 0.12sec/60°(3.0~4.5V) / torque 0.12kgf/cm / dimension 19.2*8.3*19.7mm All-up Weight: 68.4g (Battery included) Package Includes: Superior Edition Pre-assembled Walkera 4G3 2.4GHz Helicopter Walkera WK-2601 Transmitter 6 channel 2.4Ghz Mode 2 Battery Charger Instruction Manual Adaptor for Flight Simulator Cable One Set Extra Main Blades Walkera Battery 3.7V 400mAh Li-Po |
|
|
Walkera 4G3 Micro Metal 3D Aerobatic Brushless CNC RC Helicopter w/ 2801 2.4GHz RC Transmitter $799.95 Walkera 4G3 V2 2.4Ghz Metal Upgrade with WK-2801 8CH Transmitter Edition Helicopter WK-2801 is completely compatibile with 4CH, 6CH, 7CH (Channel) 2.4GHz Products of walkera series. That means you can use WK-2801 for all walkera 2.4GHz Helicopters. Specification Main Rotor Dia.: 302mm Tail Rotor Dia.: 58mm Overall Length: 273mm All-up Weight: 68.4g (Battery included) Main Motor: 1225FE33 Tail Motor: 0716R Battery: 3.7V 400mAh Li-Po Transmitter: WK-2801 Receiver: RX-2605 Servo: wk-02-1 / weight 3.18g / speed 0.12sec/60°(3.0~4.5V) / torque 0.12kgf/cm / dimension 19.2*8.3*19.7mm Gyro: Built-in Features: Ultra mini indoor 3D mode broke the concept of space limitation. Super mini but super precision. Small size helicopter but with full functions of big one. The latest single-cell LiPo technology is CREATIVELY used in this size helicopter in the world. It features friendly environment and energy-saving concept. Equipped with high performance motor, the flight time will be up to 7 to 8 minutes at 3.7V 400mAh LiPo battery pack, depending on your flight mode. WK-2801 Specification: Encoder: 8 channel micro computer system Frequency: 2.4G spread spectrum Output Power: ≤10Mw Current Drain: ≤120mA Power: 1.2VX8 NiCard (9.6V600mAh) or 1.5VX8 AA dry batteries WK-2801 Features: The WK-2801 adopts 2.4Gig spectrum technology and features automatic code pairing and ID assignment. LCD display of the WK-2801 is simple to understand and easy to set. The transmitter case is ergonomically designed and the large LCD display has white backlight with easy-to-read graphics. The length or tension of the controls stick can be adjusted and it is convenient to change the throttle from left to right. The WK-2801 supports both helicopters and airplanes. It offers three helicopter flight modes and each flight mode is capable of free setting and adjusting parameter in order to suit the various requirements of F3C or 3D aerobatic flights. Capable of wireless data copy and transfer between two transmitters. Four Adjustable hot keys facilitate easy entry into the set menu. Eight model memory storage. Gyro rate adjustment by transmitter, and convenient programmed hover and 3D flights. |
|
|
CMP P40 Warhawk 50 - 54" Nitro Gas ARF Radio Remote Controlled RC Airplane RC "Tiger Shark" Plane $299 This P40 Warhawk has a fiberglass fuselage and cowl painted in vague colors. The rib wings are covered with Solartex and airbrushed to match the color of the whole aircraft. The wood that makes up both the wings and the fuselage are all laser cut. The high precision of fiberglass and fine painting work make this kit an extremely realistic aircraft. It is a perfect combination between scale looks and excellent flying performance. The kit comes with a full color decal sheet, wheels and a fuel tank. This war bird is a must fly! What the Pro says! Just to clear up some confusion, and a lot of misinformation on the internet...CMP is not Willhobby, or FlyModel, or any other company. CMP is thier own company, and they have been around for while. I have built a few of their planes, and found the quality to be quite exceptional, they are high-end stuff, and from a scale point of view, nobody else comes close. The P-40, from a scale aspect, blows away the Hangar 9 and everybody else's P-40. The paint job is dead flat and perfect, and there are a ton of factory-installed water transfer decals, a beautiful glass belly tank, strut covers, prepainted canopy frame, lots of nice stuff. All the hardware is exceptional, too, with a fiberglass pushrod for the elevator, and a pull-pull system for the rudder. You need to be careful flying it, though. It has no washout, it's not light, and it will tip stall if you pull too hard or get too slow. The big problem, though, is that the CG in the manual is actually for the much larger 71" one, and will leave you very tailheavy if you don't correct it to about 85mm from the LE. It's really, really important. If you fly off grass, you will have really hard time finding rotating retracts that will hold up. Seriously consider fixed gear like I used. I flew mine with a Saito 62, fit perfectly and was plenty of power. Let's here some other comments, this is a beautiful plane.. For more reviews and comments on other NitroPlanes.com products by rc enthusiasts, click here. *RETRACT NOTE* The retract bays are built into the wing from the factory, so the retracts will drop right in. Wing Span: 53.5" Weight: 5.64lb Length: 46" Wing Loading: 26.97oz./sq.ft. Wing Area: 480sq.in Engine 2c 40~46, 4c 52~63 Radio 4~5 Channel 5~6 Servos The kit box is nice packed, with all the major parts well packed in a light foam wrap and clear plastic bags. All wood rib wing, nicely covered, rivets decals already applied, ailerons hinged and installed. Horizontal, elevators and rudder also all wood, air foiled surfaces, hinged and ready. Fuselage is very detailed with panel lines molded in, glass work is outstanding. Tiger mouth decal, dashboard decal and many others perfectly applied. Drop tank included and assembled. Slots in the interior cardboard held all items tightly |
|
|
Walkera #54Q3 (Airwolf) Replacement Parts: Used for full fuse set $30.62 Walkera #54Q3 (Airwolf) Replacement Parts: Used for full fuse set |
|
|
Yellow Twin Engine OV10 Bronco 15 - 48" Nitro Gas/Electric Radio Remote Controlled RC Airplane $199 New OV-10 Bronco Nitro Gas/Electric Radio Remote Controlled RC Airplane! This ARF OV-10 Bronco supports both 2c 0.15 cu in engines or 400T Brushless Motor w/ 11.1V 1300-1600mAh. Electric Brushless/Nitro Gas OV-10 Bronco 15 - 48" Twin-Engine Radio Remote Controlled RC Airplane The OV-10 Bronco was a multi-purpose, light attack aircraft acquired by the Marine Corp for observation squadrons to conduct visual reconnaissance missions. The OV-10A is a twin-turboprop short takeoff and landing aircraft conceived by the Marine Corps and developed under an Air Force, Navy, and Marine Corps tri-service program. The first production OV-10A was ordered in 1966 and its initial flight took place in August 1967. The OV-10 can be used for short take-offs and landings on aircraft carriers without the use of catapults. With the second seat removed, it can carry 3,200 pounds of cargo, five paratroopers or two litter patients and an attendant. Adding to its versatility is a rear fuselage compartment with a capacity of 3,200 pounds of cargo, five combat-equipped troops, or two litter patients and a medical attendant. The Bronco's mission capabilities include observation, forward air control, helicopter escort, armed reconnaissance, gunfire spotting, utility and limited ground attack; however, the USAF acquired the Bronco primarily as a forward air control (FAC) aircraft. The Bronco also provides transportation for aerial radiological reconnaissance, tactical air observers, artillery and naval gunfire spotting and airborne controllers of tactical air support operations. Other tasks include armed escort for helicopters and front line, low-level aerial photography. Wing span: 48 in / 1220mm Wing area: 434 sq in / 28 sq dm Flying weight: 4.4 lb / 2000g Fuselage length: 50 in / 1270 mm Engine Required: 2c 0.15 cu in X2 pcs Radio Required: 4-5channels,7-9 mini servos Li-Poly : 11.1V 1300-1600mAh x2 pcs Propeller:8x6 x2pcs Out runner Brushless Motor : 400T x2 pcs Speed Control :15 - 20 Amp x2 pcs |
|
|
TG-450SE Special Edition All Aluminum 3D RC Helicopter ARF w/ Fiber Glass Canopy & Carbon Fiber Blades $595 New SE 450 Special Edition All Aluminum Mini Size 3D Electric Radio Remote Controlled RC Helicopter ARF w/ Fiber Glass Canopy!! Features ?Main shaft and tail rotor shaft running by direct transmission belt, which reduce the intermediate transmission energy loss. ?Read Axle screw used high-intensity M2.5 screw to meet the high-speed rotating of the blade. ?The up main shaft bearing block and bottom main shaft bearing block adopt integrated structure, which guarantee the main shaft running smoothly. ?The adjustable Aluminum battery mounting plate can meet different size of battery. ?The Read Axle of the blade used 4mm steel shaft to meet the hard 3D flight. ?4mm width transmission belt, reducing the slip possibility of the Tail Rotor Drive Belt. ?Their Cowling made with lighter colored glass fiber. ?Safety and convenience Linkage ball. ?All the aluminum part for this TG-450 from CNC Machinery ?Flip-gyroscope sensor structure ?High-intensity hexagonal screw up to +-14 degree. ?120 degree ECCPN SYSTEMIt comes disassemble in the box!! Everything need to be built. Professional installation required. Specifications & Equipment ?Length: 656mm ?Height: 249mm ?Main Rotor Diameter: 714mm(320 Blades) ?Tail Rotor Diameter: 147mm ?Motor Pinion Gear: 12T/13T ?Main Drive Gear: 150T ?Drive Gear Ratio: 1:12,5:4.3(12T) 1:11.51:4.3(13T) ?Weight: 380g ?Flying Weight: 780g-820g Recommended Power and Radio Equipment (NOT included in kit) ?Li-Poly Battery: 11.1v/(1500mAh or more) ?Transmitter: 6 channel or more ( Helicopter System) ?Receiver: 6 channel or more ?Gyro: 1pc ?Servo: 3pcs ?Rudder servo: 1pc ?Brushless Motor: 3200kv-4000kv ?ESC: 11.1v/(25A or more) It comes disassemble in the box!! Everything need to be built. Professional installation required. It comes disassemble in the box!! Everything need to be built. Professional installation required. |
|
|
North American AT-6F Texan 160 - 82" Nitro Gas Radio Remote Controlled ARF RC WWII Warbird Airplane $499.95 North American AT-6 Texan 160 - 82" Nitro Gas Radio Remote Controlled ARF RC Airplane The AT-6 Texan ARF Nitro Gas Plane includes decals that are already applied on the fuselage under clear coating for more durable use. This contains a fiberglass fuselage. Wing panel, elevator & tail plane are painted over high-quality balsa wood. The wing section is also fiberglass molded Wingspan 82" Fuselage Length 55" Recommended Engine Size 2c/160 Flying Weight 11.9 lbs - 12.3 lbs Wing Area 1,007 sq in Radio 4~~5 Ch 5~~6 Servos Airfoil NACA 2415 The North American AT-6 Texan won wide acclaim as one of the most well used advanced trainers not only during WWII but also beyond. This specefic AT-6F Texan is a perfect example of this post WWII use as it is restored as and is painted in the colors of the Korean War "Mosquito", a low-level support and target identifier aircraft used to support the faster jets of the period. NitroModels' AT-6 Texan is really popular and can be found at flying field and events in the many regions all over the United States. Do not miss your chance to relive a piece of history! Engine/Radio Equipments Sold Separately. Engine/Radio NOT included. Download Manual Here |
|
|
New 4 CH A-10 Thunderbolt II Radio Remote Control Electric Ducted Fan RC Fighter Jet RTF (Camo) $79 The A-10 program is developing the next-generation air superiority fighter for the Air Force to counter emerging worldwide threats. This A-10 holds the same beautiful lines as the original fighter jet. The wing and body used in this jet are specially designed to allow high G maneuvers, yet the wing loading is still very low. It becomes a stable aircraft with excellent performance. RTF (Ready To Fly) Version What the Pro says! Construction quality and paintwork from the factory is excellent, no problems at all. It took me about 20 minutes to put it together using five minute epoxy. I left the landing gear off, I prefer to hand launch. Be sure ot put some tape on the bottom for protection. The plane flies fine on the stock NIMH pack and brushed motors, in spite of all the internet "Experts" saying it would not. It will loop and roll, no problem, but it's modestly powered with the stock setup, and flight times are maybe five minutes, tops. Swapping out the 650NIMH pack for a three cell 1300 lipo made a whole new airplane out of it. Now it is fast and vividly aerobatic, and flight times are long. I set a timer at eight minutes to make sure I do not overdrain the lipo and ruin it. No reason why you could not put in a 2200 pack, either. Beware of one thing, though...the way it is set up from the factory, there is way too much elevator throw, and you may kill it on the first flight attempt. Move the control horn to the innermost hole on the elevator servo horn, and the outermost one on the horn on the elevator, and everything will be fine. I am still using the included 27mhz radio. It will occasionally glitch if I point the TX antenna right at the airplane, otherwise, it has been working fine. I have put a dozen flights in using the 11v lipo and the stock brushed motors, and the motors and ESC are still going strong, so consider that before buying a brushless converson for it. Power is a non-issue with the stock motors and a lipo batt. The plane is stable and easy to fly, yet very aerobatic. I like flying it in low and close, like the real thing. All I can say is the plane is better than expected in all respects, much better than similar offering, and it is well built and a super value for the money. Great plane to keep in the back of the car and toss around whenever you see an open space.For more reviews and comments on other NitroPlanes.com products by rc enthusiasts, click here. Specification: Wingspan: 872mm (34.5") Length: 968mm (38") Flying Weight: 450g (16 oz) Drive System: Twin 370 ducted fan motors Speed Controller: 25A speed controller |
|
|
Zlin Z-50 Engine 46~52 - 56" Nitro Gas Radio Remote Controlled RC Airplane ARF $319 The Zlin Z-50 is one of the most famous sports planes used in aerobatics and this ARF NitroModel Z50 is built with all the aerodynamic characteristic of the real one! It is a very special aerobatic airplane made by quality balsa wood protected by clear coating. 90% of the model is pre-finished at the factory - you can enjoy flying this beauty with the least building time. And of course, it flies as good as it looks! Wing Span : 55.9 in / 1420mm Wing Area : 531 sq in / 34 sq dm Flying Weight : 5.5lb / 2480g Fuselage length : 43.3 in / 1100mm Engine Required : 2c : 0.46 4c: 0.52 Radio Required : 4channels 5 servos Decals included but not pre-applied. |
|
|
AirField 70MM Brushless EDF F-16 Thunderbird Electric Ducted Fan Radio Controlled RC Jet w/ Bombs RTF $399.95 This 70mm F-16 Fighter is a high quality EPS foam model of the famous ?Fighting Falcon?. The F-16 is known as the ?Viper? in US service. It was the first fighter designed to sustain 9g maneuvers. One of the outstanding features is its frameless bubble canopy, which gives excellent all-round vision. The F-16 has been and will remain the multi-role workhorse of the United States Air Force. The F-16 was the main fighter used in the 1991 Gulf War and is still used in today?s ?War on Terror?. The Air National Guard regularly deploys these fighters to the Middle East. In honor of the US Fighters, it is only appropriate that we built these jets with extra care and fine detail. It is painted with an excellent finish to make it look just like the real thing. No details were left out, from the after burner, the missiles, to the predominant nose. To do the F-16 justice, we used the newest electronics and gave it the U.S. Air Force look. Even though we went out of the way to mirror the real F-16, this EDF Jet was also built to be user friendly and ready to fly. The fuselage is pre-assembled and it requires very minimal assembly to get it soaring in the sky. 4 Channel Full Function Radio Controlled (Aileron,Elevator,Rudder,Throttle) Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible Excellent hedgehopping performance High speed, flying speed at 80mph+!!! Excellent stability of nosing up and down State of the art components such as Outrunner Brushless Ducted Fan, 45amp Speed Control, and 2200mah 20C 14.8 Volt Li-Po Battery Pack famousus "Cobra Maneuver" available Steerable nose landing gear Rudder helps steer plane on ground on its scale landing gear for easy take off Super tough, lightweight airframe! Shock Resistant Reinforced fuselage and Strong Wings Can Take Off From Ground or Hand Launched Ground Take-Off can be performed easily Excellent Flight Performance Super easy and super stable electric powered scale R/C park flyer for beginner or middle-level users Stable inverted flight fuselage with pre-installed Electronics, Motor, Servos, and Speed Controller Superb Quality, Simply the Best RTF Jet you can find!!! Super stable for beginner, Super low speed for safety, Super low altitude for fun Fabricated by accurate molds with high fidelity of real airplane Excellent stability and aerobatic capability High roll rate Digital |
|
|
AirField 70MM Brushless EDF F-16 Tiger Jet Electric Ducted Fan RC Jet w/ Bombs RTF $399.95 This 70mm F-16 Fighter is a high quality EPS foam model of the famous ?Fighting Falcon?. The F-16 is known as the ?Viper? in US service. It was the first fighter designed to sustain 9g maneuvers. One of the outstanding features is its frameless bubble canopy, which gives excellent all-round vision. The F-16 has been and will remain the multi-role workhorse of the United States Air Force. The F-16 was the main fighter used in the 1991 Gulf War and is still used in today?s ?War on Terror?. The Air National Guard regularly deploys these fighters to the Middle East. In honor of the US Fighters, it is only appropriate that we built these jets with extra care and fine detail. It is painted with an excellent finish to make it look just like the real thing. No details were left out, from the after burner, the missiles, to the predominant nose. To do the F-16 justice, we used the newest electronics and gave it the U.S. Air Force look. Even though we went out of the way to mirror the real F-16, this EDF Jet was also built to be user friendly and ready to fly. The fuselage is pre-assembled and it requires very minimal assembly to get it soaring in the sky. 4 Channel Full Function Radio Controlled (Aileron,Elevator,Rudder,Throttle) Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible Excellent hedgehopping performance High speed, flying speed at 80mph+!!! Excellent stability of nosing up and down State of the art components such as Outrunner Brushless Ducted Fan, 45amp Speed Control, and 2200mah 20C 14.8 Volt Li-Po Battery Pack famousus "Cobra Maneuver" available Steerable nose landing gear Rudder helps steer plane on ground on its scale landing gear for easy take off Super tough, lightweight airframe! Shock Resistant Reinforced fuselage and Strong Wings Can Take Off From Ground or Hand Launched Ground Take-Off can be performed easily Excellent Flight Performance Super easy and super stable electric powered scale R/C park flyer for beginner or middle-level users Stable inverted flight fuselage with pre-installed Electronics, Motor, Servos, and Speed Controller Superb Quality, Simply the Best RTF Jet you can find!!! Super stable for beginner, Super low speed for safety, Super low altitude for fun Fabricated by accurate molds with high fidelity of real airplane Excellent stability and aerobatic capability High roll rate Digital Propor |
|
|
New RC Tech 6 CH Flight Simulator Remote Control w/ Software for Helicopters/ Airplanes $59.95 Revolutionary New Model Flight Simulator that allows the user to fly with the same type of transmitter used for regular flight. There are only a few Transmitter and Simulator combos on the Internet and none are equivalent to the Dynam FMS Simulator Package in value. This new simulator gives you real world flying experiences from your PC. Its Interlink Controller plugs into a USB port on your computer. It looks and feels just like a real transmitter and has switches for dual rates, retracts, and a knob for flaps. Especially without 8"AA" battery can directly work with computer. This simulator includes a model airplane simulator, model helicopter simulator, model glider simulator, and the ability to create your own models and landscapes. Connect with USB port cable and no batteries is required High-performance, High-realism 3D graphics and 3D sound effects Full 3D collision detection with all objects on the landscape, Many new landscapes New installation routine Thermal with adjustable strength Translated user interface with 18 languages Selectable color depth (16-bit or 32-bit) in full screen-mode Automatic saving and loading of all settings Vario display for soaring Separate channel- and keyboard mapping for helicopters and airplanes Designed for Windows 98, ME, 2000 , XP Flight Simulator comes with different types of planes and helicopters. You can sharpen your skills by practicing on computers. You can learn a lot no matter basic or advanced skills. For example: SYSTEM REQUIREMENTS: WINDOW XP, 2000, ME, 98 HARDWARE REQUIREMENTS: CPU: INTEL PENTIUM 600 OR ABOVE 32MB GAP 3D 128MB 10GB 52 X CD-ROM PORT USE : USB 1.0 / 2.0 SIMULATORS SUPPORT: FMS VERSION 2.0 BETA 7 FMS VERSION 2.0 ALPHA8.4 BE USED FOR: HELICOPTER, AIRPLANE, GLIDER |
|
|
Upgraded Brushless J3 Piper Cub 3-Channel Radio Remote Control RC Scale Plane RTF $299.95 Specification: Wingspam: 955mm / 37.40inch Length: 730mm / 28.74inch Flying Weight: 450g Drive System: 2410 Brushless Motor 1200KV Speed Controller:20A Brushless Electronic speed controller Servo: 2x10g Battery: 11.1V 1000mah 15C LiPo Battery Control system: 3 CH Multifunctional Radio Transmitter and Micro Receiver Radio Control Range: > 1000 feet (300m) Feature: 3 Channel Full Function Radio Controlled ( Elevator, Rudder, Throttle) Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible The wing and body used in this jet are specially designed to allow high G maneuvers, yet the wing loading is still very low Powerful brush motor makes it possible to fly this plane at high speed in the situations with much wind Excellent stability of nosing up and down Rudder helps steer plane on ground on its scale landing gear for easy take off Ready to Fly in Just Minutes! Super tough, lightweight airframe! Perfect appearance and emulation (Scale appearance, great attention has been given to details) Shock Resistant Reinforced Fuselage and Strong Wings Can Take Off From Ground or Hand Launched Ground Take-Off can be performed easily Excellent Flight Performance Super easy and super stable electric powered scale R/C park flyer for beginner or middle-level users Stable inverted flight Fuselage with pre-installed Electronics, Motor, Servos, and Speed Controller Super stable for beginner, Super low speed for safety, Super low altitude for fun Fabricated by accurate molds with high fidelity of real airplane Excellent stability and aerobatic capability Detailed Body Structure High roll rate Digital Proportional Motor Speed Control Slow Speed Flying Capable, Good for Beginner Suitable for both beginners and experienced pilots Approximately 10-15 minutes flight time on each charge Complete Kit, Ready to Fly, Easy to Assemble (Everything is included and 90% assembled -- only required 8 AA batteries for the transmitter to start flying) |
|
|
Upgraded 4-CH Catalina RC SeaPlane w/ Dual Brushless Motor & ESC+ Floats + LiPo Battery 100% RTF $399.95 (NO CHARGER AND AC ADAPTER) Specification: Wingspan: 1380mm (54.3") Length: 880mm (34.6") Flying Weight: 780g (27.5 oz) Drive System: Twin 2410-size brushless motors w/ 1200KV Speed Controller: 25A brushless speed controller Servo: 3x10g Battery: 11.1V 15C 1500MAH Li-Poly Control system: 4 CH Multifunctional Radio Transmitter and Micro Receiver Radio Control Range: > 1000 feet (300m) Feature: 4 Channel Full Function Radio Controlled (Aileron, Elevator, Rudder, Throttle) Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible The wing and body used in this jet are specially designed to allow high G maneuvers, yet the wing loading is still very low Powerful 2410-size brushless motor (1200KV) makes it possible to fly this plane at high speed in the situations with much wind Includes 11.1v 15c 1500mAH LiPo Battery Excellent stability of nosing up and down Rudder helps steer plane on water Ready to Fly in Just Minutes! Super tough, lightweight airframe! Perfect appearance and emulation (Scale appearance, great attention has been given to details) Shock Resistant Reinforced Fuselage and Strong Wings Can Take Off From water or Hand Launched Excellent Flight Performance Super easy and super stable electric powered scale R/C park flyer for beginner or middle-level users Stable inverted flight Fuselage with pre-installed Electronics, Brushless Motor, Servos, and Speed Controller Super stable for beginner, Super low speed for safety, Super low altitude for fun Fabricated by accurate molds with high fidelity of real airplane Excellent stability and aerobatic capability Detailed Body Structure High roll rate Digital Proportional Motor Speed Control Slow Speed Flying Capable, Good for Beginner Suitable for both beginners and experienced pilots Approximately 10-15 minutes flight time on each charge Complete Kit, Ready to Fly, Easy to Assemble (Everything is included and 90% assembled -- only required 8 AA batteries for the transmitter to start flying) Package Include: Airplan |
|
|
Upgraded Brushless F4U Corsair 4-Channel Electric Radio Remote Controlled RC Warbird Plane Ready-to-Fly RTF! $299.95 The F4U Corsair was the most famous of all the aircraft in WWII. This F4U Corsair has been a favorite of R/C modelers for years, and now available as an easy-going, 100% Ready-to-Fly replica that is small enough and quiet enough for flying sorties at your local park or sport field! RTF (Ready To Fly) Version Specification: Wingspan: 870mm (34.5") Length: 750mm (29.53") Flying Weight: 400g (14.11 oz) Drive System: 2410 Brushless Motor 1200KV Speed Controller:20A Brushless Electronic speed controller Servo: 3x10g Battery: 11.1V 1000mah 15C LiPo Battery Control system: 4 CH Multifunctional Radio Transmitter and Micro Receiver Radio Control Range: > 1000 feet (300m) Feature: 4 Channel Full Function Radio Controlled (Aileron, Elevator, Rudder, Throttle) Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible The wing and body used in this jet are specially designed to allow high G maneuvers, yet the wing loading is still very low Powerful brush motor makes it possible to fly this plane at high speed in the situations with much wind Excellent stability of nosing up and down Rudder helps steer plane on ground on its scale landing gear for easy take off Ready to Fly in Just Minutes! Super tough, lightweight airframe! Perfect appearance and emulation (Scale appearance, great attention has been given to details) Shock Resistant Reinforced Fuselage and Strong Wings Can Take Off From Ground or Hand Launched Ground Take-Off can be performed easily Excellent Flight Performance Super easy and super stable electric powered scale R/C park flyer for beginner or middle-level users Stable inverted flight Fuselage with pre-installed Electronics, Motor, Servos, and Speed Controller Super stable for beginner, Super low speed for safety, Super low altitude for fun Fabricated by accurate molds with high fidelity of real airplane Excellent stability and aerobatic capability Detailed Body Structure High roll rate Digital Proportional Motor Speed Control Slow Speed Flying Capable, Good for Beginner Suitable for both beginners and experienced pilots Approximately 10-15 minutes flight time on each charge Complete Kit, Ready to Fly, Easy to Assemble (Everything is included and |
|
|
Upgraded Brushless P-47 Thunderbolt 4-Channel Radio Remote Control RC Scale Plane RTF (Blue) $299.95 TThe P-47 Thunderbolt was the most famous of all the Republic aircraft in WWII. In the entire history of military aviation, there has never been an airplane that could match the P-47 Thunderbolt for ruggedness and dependability. It was by far the largest and heaviest single-engined WWII fighter that had been built. This Thunderbolt has been a favorite of R/C modelers for years, and now available as an easy-going, 100% Ready-to-Fly replica that is small enough and quiet enough for flying sorties at your local park or sport field! RTF (Ready To Fly) Version Specification: Wingspan: 830mm (33") Length: 730mm (29") Flying Weight: 410g (14.5 oz) Speed Controller:20A Brushless Electronic speed controller Servo: 3x10g Battery: 11.1V 1000mah 15C LiPo Battery Control system: 4 CH Multifunctional Radio Transmitter and Micro Receiver Control system: 4 CH Multifunctional Radio Transmitter and Micro Receiver Radio Control Range: > 1000 feet (300m) Feature: 4 Channel Full Function Radio Controlled (Aileron, Elevator, Rudder, Throttle) Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible The wing and body used in this jet are specially designed to allow high G maneuvers, yet the wing loading is still very low Powerful brush motor makes it possible to fly this plane at high speed in the situations with much wind Excellent stability of nosing up and down Rudder helps steer plane on ground on its scale landing gear for easy take off Ready to Fly in Just Minutes! Super tough, lightweight airframe! Perfect appearance and emulation (Scale appearance, great attention has been given to details) Shock Resistant Reinforced Fuselage and Strong Wings Can Take Off From Ground or Hand Launched Ground Take-Off can be performed easily Excellent Flight Performance Super easy and super stable electric powered scale R/C park flyer for beginner or middle-level users Stable inverted flight Fuselage with pre-installed Electronics, Motor, Servos, and Speed Controller Super stable for beginner, Super low speed for safety, Super low altitude for fun Fabricated by accurate molds with high fidelity of real airplane Excellent stability and aerobatic capability Detailed Body Structure High roll rate Digital Proportional Motor Speed Control |
|
|
Upgraded Brushless P-47 Thunderbolt 4-Channel Radio Remote Control RC Scale Plane RTF (Green) $299.95 TThe P-47 Thunderbolt was the most famous of all the Republic aircraft in WWII. In the entire history of military aviation, there has never been an airplane that could match the P-47 Thunderbolt for ruggedness and dependability. It was by far the largest and heaviest single-engined WWII fighter that had been built. This Thunderbolt has been a favorite of R/C modelers for years, and now available as an easy-going, 100% Ready-to-Fly replica that is small enough and quiet enough for flying sorties at your local park or sport field! RTF (Ready To Fly) Version Specification: Wingspan: 830mm (33") Length: 730mm (29") Flying Weight: 410g (14.5 oz) Speed Controller:20A Brushless Electronic speed controller Servo: 3x10g Battery: 11.1V 1000mah 15C LiPo Battery Control system: 4 CH Multifunctional Radio Transmitter and Micro Receiver Control system: 4 CH Multifunctional Radio Transmitter and Micro Receiver Radio Control Range: > 1000 feet (300m) Feature: 4 Channel Full Function Radio Controlled (Aileron, Elevator, Rudder, Throttle) Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible The wing and body used in this jet are specially designed to allow high G maneuvers, yet the wing loading is still very low Powerful brush motor makes it possible to fly this plane at high speed in the situations with much wind Excellent stability of nosing up and down Rudder helps steer plane on ground on its scale landing gear for easy take off Ready to Fly in Just Minutes! Super tough, lightweight airframe! Perfect appearance and emulation (Scale appearance, great attention has been given to details) Shock Resistant Reinforced Fuselage and Strong Wings Can Take Off From Ground or Hand Launched Ground Take-Off can be performed easily Excellent Flight Performance Super easy and super stable electric powered scale R/C park flyer for beginner or middle-level users Stable inverted flight Fuselage with pre-installed Electronics, Motor, Servos, and Speed Controller Super stable for beginner, Super low speed for safety, Super low altitude for fun Fabricated by accurate molds with high fidelity of real airplane Excellent stability and aerobatic capability Detailed Body Structure High roll rate Digital Proportional Motor Speed Control Slow Speed Flying Capable, Good for Beginner Suita |
|
|
Upgraded Brushless P-51 Mustang 4-Channel Radio Remote Control RC Scale Plane RTF (Blue) $299.95 The P51D Mustang was the most famous of all of the aircrafts in WWII. In the entire history of military aviation, there has never been an airplane that could match the P51D Mustang for ruggedness and dependability. It was by far the largest and heaviest single-engined WWII fighter that had been built. This Mustang has been a favorite of R/C modelers for years, and now available as an easy-going, 100% Ready-to-Fly replica that is small enough and quiet enough for flying sorties at your local park or sport field! RTF (Ready To Fly) Version Feature: 4 Channel Full Function Radio Controlled (Aileron, Elevator, Rudder, Throttle) Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible The wing and body used in this jet are specially designed to allow high G maneuvers, yet the wing loading is still very low Powerful brush motor makes it possible to fly this plane at high speed in the situations with much wind Excellent stability of nosing up and down Rudder helps steer plane on ground on its scale landing gear for easy take off Ready to Fly in Just Minutes! Super tough, lightweight airframe! Perfect appearance and emulation (Scale appearance, great attention has been given to details) Shock Resistant Reinforced Fuselage and Strong Wings Can Take Off From Ground or Hand Launched Ground Take-Off can be performed easily Excellent Flight Performance Super easy and super stable electric powered scale R/C park flyer for beginner or middle-level users Stable inverted flight Fuselage with pre-installed Electronics, Motor, Servos, and Speed Controller Super stable for beginner, Super low speed for safety, Super low altitude for fun Fabricated by accurate molds with high fidelity of real airplane Excellent stability and aerobatic capability Detailed Body Structure High roll rate Digital Proportional Motor Speed Control Slow Speed Flying Capable, Good for Beginner Suitable for both beginners and experienced pilots Approximately 10-15 minutes flight time on each charge Complete Kit, Ready to Fly, Easy to Assemble (Everything is included and 90% assembled -- only required 8 AA batteries for the transmitter to start flying) Package Include: Airplane (90% assembled, all electronic components are installed), Ready to fly in minutes 4 Channel Multifunctional Radio Transmitter |
|
|
Upgraded Brushless P-51 Mustang 4-Channel Radio Remote Control RC Scale Plane RTF (Green) $299.95 The P51D Mustang was the most famous of all of the aircrafts in WWII. In the entire history of military aviation, there has never been an airplane that could match the P51D Mustang for ruggedness and dependability. It was by far the largest and heaviest single-engined WWII fighter that had been built. This Mustang has been a favorite of R/C modelers for years, and now available as an easy-going, 100% Ready-to-Fly replica that is small enough and quiet enough for flying sorties at your local park or sport field! RTF (Ready To Fly) Version Feature: 4 Channel Full Function Radio Controlled (Aileron, Elevator, Rudder, Throttle) Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible The wing and body used in this jet are specially designed to allow high G maneuvers, yet the wing loading is still very low Powerful brush motor makes it possible to fly this plane at high speed in the situations with much wind Excellent stability of nosing up and down Rudder helps steer plane on ground on its scale landing gear for easy take off Ready to Fly in Just Minutes! Super tough, lightweight airframe! Perfect appearance and emulation (Scale appearance, great attention has been given to details) Shock Resistant Reinforced Fuselage and Strong Wings Can Take Off From Ground or Hand Launched Ground Take-Off can be performed easily Excellent Flight Performance Super easy and super stable electric powered scale R/C park flyer for beginner or middle-level users Stable inverted flight Fuselage with pre-installed Electronics, Motor, Servos, and Speed Controller Super stable for beginner, Super low speed for safety, Super low altitude for fun Fabricated by accurate molds with high fidelity of real airplane Excellent stability and aerobatic capability Detailed Body Structure High roll rate Digital Proportional Motor Speed Control Slow Speed Flying Capable, Good for Beginner Suitable for both beginners and experienced pilots Approximately 10-15 minutes flight time on each charge Complete Kit, Ready to Fly, Easy to Assemble (Everything is included and 90% assembled -- only required 8 AA batteries for the transmitter to start flying) Package Include: Airplane (90% assembled, all electronic components are installed), Ready to fly in minutes 4 Channe |
|
|
|
July 15th, 2007 in
RC Airplanes