RC Tyco Bnib Best
RC Tyco Bnib Best
 |
No items matching your keywords were found.
_________________________________________________________________________________
|
|
Exceed RC 3-Channel J3 Piper Cub EP Electric RC Airplane 100% Ready-to-Fly *New* THE BEST TRAINER!!! $69.95 Exceed RC's SD J3 Grasshopper Scale RC Plane 1:10 SCALE READY TO FLY Electric Powered RC Airplane, Brand New! Ready to fly RC with amazing performance. Complete with 3 channel C&F RC, 9 gram micro servos, rechargeable battery and charger installed. Even the pushrods and control surface horns are fitted! Factory built. Just takes minutes to assemble. You can even remove the RC and use it in other models! What a great investment in fun!! Piper Cub J3 Beginners Guide Part 1 ' Piper Cub J3 Beginners Guide Part 2 The J3 CUB 3 Channel has successfully trained thousands of newbie radio controlled pilots worldwide. You'll be flying within minutes of receiving this fully built airplane enjoying over 12 minute flight times on a single charge thanks to our new improved NiMH battery and ball bearing gear drive system. Equipped with a powerful speed electric motor, which starts with a push of a button, the J3 CUB is capable of take-offs from the ground with its huge powerful motor and wide wingspan. Battery Operated 380 Motor Plane Ready to Fly, assembly can be done in 10 mins Digital Proportional Speed Controller Slow Speed Flying Capable, Good for Beginner Shock Resistant Reinforced Foam Fuselage and Strong Wings 2 X 18g micro servo for Rudder and Elevator Control R/C Set included, Complete 3 Channel Control including Complete Left/Right Control by Rudder Complete Elevator Control Digital Proportional Motor Speed Control Knob Superb Quality--Simply The Best RTF Plane you can find Up to 300Maltitude, over 15 mins flight time Powered by 8.4V NIMH re-chargeable battery (110v adaptor included) Can Fly as a Glider (without Motor Power) Brand NEWAll tools required are included for you Assembly take less than 20mins Best Looking Plane on the market Data Sheet: Ready to fly (RTF) with battery charger and RC! Includes REAL RC equipment which can be used in other models! Wing span - 37.5 inches (95.5cm) Length - 28.8 inches (73cm) Wing area - 13.7dm2 Assembly is a snap! With no tools required, you can be up and flying within minutes of opening the box! Highlighted features for this airplane Transmitter 3 Channel Radio Controller features: Left/Right Control Elevator Control Digital Progressive Motor Speed Control Kno |
|
|
Wild Horse Edge 540T - 50CC Nitro RC Aerobatic Plane ARF $399 New 2009 Edge 540T-50CC Nitro RC Plane. Wingspan 84", VERY light-weight, great covering, high quality building materials and assembly - all makes this model super attractive. Flying weight ~15 to 16lb with DA50 (click here to purchase engine) and stock muffler. Full 3D maneuvers with plenty of surprises. Super-steady harriers and inverted harriers, incredible spins of all kinds - one of the best 50cc nitro planes in the world. |
|
|
5G T-Pro RC Servo $4.95 THIS IS ONE SUPER MICRO 5G SERVO pole motor and indirect drive give this micro the extreme torque needed for larger aircraft, yet in a size that fits park flyers. Who buys from us??? Our servos are used by many manufacturers all over the world in helicopters, small to mid-size r/c airplanes, and many schools and institutions (mostly those engineering dudes)! BRAND NEW - SEALED 5 Gram Mini Micro Servo!!! Retail $29.99+ in store!!! Compatiable w/: FUTABA, JR, HITEC, AIRTRONICS, GWS, SANWA & AASHAI Radio Systems Call us crazy, but this is the lowest price you will ever see!!! At such an bargain price, it's great for students who are working on engineering projects, ideal for hobby people, and best of all, it's the ultimate item for your remote control airplanes and helicopters!!! Light-Weight, High-Quality, and Lightning-Fast "Designed to work with almost all Radio Control Systems" Excellent performance brings you to another horizon of flight Operating Voltage: 3.0V - 7.2V Operating Speed: 0.08sec/60 degrees at no load Stall Torque: 0.8kg/cm Motor Type: coreless motor Gear Type: All Nylon Gear Connector Wire Length: 150mm Dimensions: 20.9mm x 11.4mm x 22mm Weight: 5.0g |
|
|
2.4GHz Thunder Tiger E325 3D RC Helicopter Super Combo $479.99 TTR4710-F06M2A1 Thunder Tiger E325 Super Combo 2.4Ghz RC Helicopter Detailed Description Overview 3D Performance + 2.4GHz Radio System = 100% Thrills The mini Titan E325 super combo is a ready-to-fly 3D helicopter package combining the advanced SkyMaster TS6 2.4GHz 6-CH radio system and iFHSS technology.From radio system to electronic speed control, high-performance brushless motor and servos, all the best is included. Go fly and experience 100% thrills Features ? iFHSS 2.4G Radio System ? Super strong and lightweight one-piece main frame ? One-piece molded landing skid ? Easily accessible and removable motor to change pinions ? High-positioned battery tray for crisp aerobatics ? Changeable Bell-Hiller mixing ratio for different flying styles ? 120 degree ECCPM control system ? Main rotor grips with 2 radial and a thrust bearing. ? Full autorotation system ? Entire tail assembly detaches for easy transportation and storing ? Precise tail pitch control system Mini Tiitan E325 2.4G Super Combo includes: ? E325 2.4G Super Combo with new scheme canopy, main wood blades. ? ACE RC TS6 Radio system (TS6 transmitter + TRS601DD 6ch 2.4 G receiver) ? Li-Po battery & Transmitter battery ? Instrucion Manual ? Quick Start Guide ? ACE RC T3AC Li-Po charger & Transmitter charger (except New Zealand & Australia editon) ACE RC TS6 - iFHSS 2.4G radio system transfers from Innovator ACE RC TRS601DD 2.4G receiver OBL 29/35-10H Brushless Motor ATG-6100M Gyro + E-CCPM Mixer C0915 Micro Rudder Servo C1016 Micro Servos |
|
|
Walkera 4G3 Micro Metal 3D 6-Channel Aerobatic RC Helicopter w/ 2601 2.4GHz RC Transmitter $229.95 The Walkera 4G3 2.4GHz 6 channel Dragonfly helicopter comes packaged with everything needed and it is ready to fly right out of the box. Walkera HM 4G3 2.4G Metal Edition is a new generation palm size helicopter equipped with 2.4G advanced radio system and metal upgrades. To compare it with other palm size helicopters, 4G3 offers more stable, silence and smoother flight. This is a micro 3d flying miracle. Perform all the tricks of a larger helicopter indoors with this micro helicopter. It is not a 2-Channels RC Helicopter Toy. It is a serious RC helicopter for players from intermediate to experts. Trust me; this is the best Micro Helicopter Ever! If you can handle a helicopter with tail blade, you will love it. Most helicopter testers can't resist the temptation to this amazing micro helicopter! When we want to dazzle our clients, this is the helicopter we use to perform tricks for them indoors. Improvements on the 4G3 over the 4#3 - 4G3 is about 60cm in longer in length - Basically, it is about 90% different from 4#3 - 3D Flying capable - Metal rotor head already installed - Using small gear tooth, quieter and smoother than original 4#3 Features: Compact 90° swashplate structure is adopted and easy-to-be-mounted parts like servo are used; Brushed motors offer powerful drive; Ultra mini indoor 3D mode broke the concept of space limitation; Small size helicopter but with full functions of big one; Super mini but super precision; Equipped with high performance motor, the flight time will be up to 7 to 8 minutes at 3.7V 400mAh LiPo battery pack, depending on your flight mode. 4-in-1 receiver includes the functions of both Servo Extent Adjustment and Built-in Gyro Sensitivity Adjustment; High volume Lithium polymer at 3.7V 400mAh provides 7- to 10-minute flight after fully charged, depending on your flight; The latest single-cell LiPo technology is CREATIVELY used in this size helicopter in the world. It features friendly environment and energy-saving concept; The usage of 2.4G technology is prompter in reaction, more sensitive in operation, and stronger in anti-interference. Specifications: Overall Length: 273 mm Tail Motor: 0716R (Strong magnet brush motor) Main Rotor Diameter: 302 mm Tail Rotor Diameter: 58 mm Drive Motor: 1225FE33 (Strong magnet brush motor) Transmitter: WK-2601 Battery: 3.7V 400mAh Li-Po Gyro: Built-in Receiver: RX-2605 Servo: WK-02-1 / weight 3.18g / speed 0.12sec/60°(3.0~4.5V) / torque 0.12kgf/cm / dimension 19.2*8.3*19.7mm All-up Weight: 68.4g (Battery included) Package Includes: Superior Edition Pre-assembled Walkera 4G3 2.4GHz Helicopter Walkera WK-2601 Transmitter 6 channel 2.4Ghz Mode 2 Battery Charger Instruction Manual Adaptor for Flight Simulator Cable One Set Extra Main Blades Walkera Battery 3.7V 400mAh Li-Po |
|
|
2.4Ghz Exceed RC LEGEND 450SE RTF Remote Control 3D Helicopter 100% Ready to Fly $189.95 The Exceed RC 2.4GHz 450 SE RTF is a fully loaded version 2.4GHz 3D RC helicopter, 100% built, Ready-to-Fly! Light and fast, this new machine from Exceed RC has everything you ever wanted. The 2.4 GHz 450 SE RTF Helicopter is an advanced RC helicopter designed with the most updated current technology available and produced with the highest quality. While most parts are compatible with the world's most popular 450 size electric helicopter such as the T-REX450, the Exceed RC 2.4 GHz 450 SE RTF is designed with the best features available while eliminating all the weak points from the current T-REX SE. All the hardware is high A-Grade with all hex screws supplied and high quality Germany-imported bearings. What is 2.4Ghz Technology? New 2.4G Spread Spectrum technology allows the transmitter and receiver to be 'locked-on' to the same frequency ensuring much improved reliability and peace of mind when flying. Second, 2.4 Gigahertz systems offers quicker, more responsive control, when compared to a standard frequency system. Third, Operating at 2.4 Gigahertz also puts the radio control out of the frequency range of any 'noise' caed by the other electronic components on your helicopter - such as the motor, speed controller and any metal to metal noise - eliminating interference and glitching that can affect traditional frequency system. Fourth, another main characteristic of 2.4 Gigahertz equipment from a RC model club?s point of view is that no frequency control is needed. Eliminating the need to check everyone else's channel numbers, prior to flying. No more worries about turning up at a club with the wrong crystal in your Tx. The Exceed-RC 2.4GHz SE RTF uses a combination of tough, lightweight aluminum and updated composite parts and is designed and equipped to be capable of the most extreme 3D maneuvers . And since it's 95% assembled, you can have it flying in just a few hours. We are also proud to offer this magnificent model as 3D capable right out of the box. Combining the knowledge of RC nitro collective precision along with the most advanced micro electric design concepts, we have arrived at a model that excels prepared to wipe out the competition. The Exceed-RC 2.4GHz SE RTF offers collective pitch control that will let helicopter pilots to fly in almost any direction. Transitioning from forward flight to hover with smooth, solid control is a cinch and negative pitch is a breeze for aerobatics like loops and rolls. The installed mixing board controls mixing of the main and tail rotors. The board also contains speed controls, a external gyro for tail stabilizing and a BEC circuit that supplies power to the receiver and servos Expect only the best as you experience tight, precise control and quick response as the Exceed-RC 2.4GHz SE RTF will |
|
|
300DF Outrunner RC Brushless Motor for Electric Radio Remote Control Planes (Recommended for Slow Stick RC Flyer) 2250 RPM $29.95 The 300DF is a light motor, designed to fly park flyers. Use the 300DF with a 3:1 or gearbox and large prop 8x4, or a speed demon on a 5x3 inch or smaller prop. 2 cell Lipo or 3 cell Lipo can be used with all this motor, but best performance can be achieved by using 3 cells+4.5:1 gear ratio with 12X6, or 11X7 or 11X4.7 props. The data for other props and gears: For 3.4:1 gearing use 11x7 HD, 11x4.7 SF For 4.5:1 gearing use 12x6, 11X4.7, 11X7 SF 300DF pusher props have proven to be spectacular. It has been flown with Wing Warrior Zaggis, Wattage HyperWing and Edge RC delta wing planes. Using a small prop direct drive and wings around 16 Oz weight, this is the best you can get at this price. With a 5x4 prop it draws about 12 amps. It is equally good with large props in a gearbox. So decide whether you want speed - 50+ MPH or slow fly with large props and a lot of torque and use this motor for both. Specifications Max Current: 10 Amps. KV: 2250 Weight: 29.7 grams Shaft Diameter: 2.3mm Mount holes: standard 16.5 & 19.5 We have done extensive testing on this motor and are really excited about putting it into action in some of our IFO's, Tiger Moths (can you say 3D Tiger Moth), PT-17, and any plane 12 oz's or less should go 3D ! The motor has been tested and works well with two and three LiPo cells in series. I like them on three LiPos ! A two cell runs between 6 and 8.4 volts. A three cell runs between 9 and 12.6 volts, depending on the state of charge. See the Tech Chart to figure out what type of performance you'll get with these motors. |
|
|
New Nitro Gas Super Trainer 46 - 63" Radio Control RC Airplane ARF Kit $59.95 New Nitro-powered Sport Trainer-46 Radio Controlled Airplane! Best way to get trained to fly the most powerful radio control airplane in the world. Nitro rc plane is a whole different feel. Electric is fast. Brushless electric is super fast. But nitro? O Man O Man! Just imagine driving a ferrari down the street. That's how it feels! So start now. Start with this new trainer from Nitroplanes.com and you may never want to go back to electric! |
|
|
ARF 4-Ch AirField RC F-18C 670mm (26.4") EDF RC Jet w/ Brushless Motor+ESC (White) $119 The F-18 Fighter is modeled after the F/A-18 Hornet, which fulfilled fighter and aircraft duties. The first prototype of the Hornet was introduced on November 18, 1978. It entered service to the US Navy and Marine Corps in 1981. The Hornet has proven itself time and time again during Desert Storm, Operation Southern Watch and the Desert Fox strikes against Iraq in December of 1998. During Operation Iraqi Freedom, Hornets dominated the aerial campaign by carrying out strikes, close air support, refueling, anti-shipping, and forward air control missions. True to the original, this F-18 EDF Jet has everything: high-speed flying, real jet style aerobatics and has one of the finest low-speed characteristics of any ducted fan airplane ever.Larger than most EDFs and pushers, the F-18 has a huge presence in the sky, just like the real Hornets. The F-18 Fighter is made with high-quality foam which gives it unparalleled durability. The ARF (almost ready to fly) version includes a ducted fan unit and brushless motor w/ ESC & servos, linkages assembled, installed and balanced. With little assembly time, you can quickly get this jet up in the sky. This is simply the best looking and most affordable EDF in its class. It does not come with TX, RX, battery nor charger. WINGSPAN : 670mm (26.4 inches) LENGTH : 960mm (37.8 inches) WEIGHT : 620g (22oz) POWER SYSTEM : 64mm Ducted Fan With Outrunner Brushless Motor Additional Requirements 4-Ch TX+RX LiPo Battery Balance Charger 11.1V Li-Poly Rechargeable Battery |
|
|
ARF AirField RC 70MM EDF RC Jet w/ Brushless Motor+ESC (Red) $149 This EDF Jet was also built to be user friendly and ready to fly. The fuselage is pre-assembled and it requires very minimal assembly to get it soaring in the sky. This ARF Version includes a pre-assembled kit w/ brushless motor+esc. It does not come with TX, RX, battery nor charger. 4 Channel Full Function Radio Controlled (Aileron,Elevator,Rudder,Throttle) Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible Excellent hedgehopping performance High speed, flying speed at 80mph+!!! Excellent stability of nosing up and down State of the art components such as Outrunner Brushless Ducted Fan, 45amp Speed Control, and 2200mah 20C 14.8 Volt Li-Po Battery Pack Steer-able nose landing gear Rudder helps steer plane on ground on its scale landing gear for easy take off Super tough, lightweight airframe! Shock Resistant Reinforced fuselage and Strong Wings Can Take Off From Ground or Hand Launched Ground Take-Off can be performed easily Excellent Flight Performance Super easy and super stable electric powered scale R/C park flyer for beginner or middle-level users Stable inverted flight Fuselage with pre-installed Electronics, Motor, Servos, and Speed Controller Superb Quality, Simply the Best RTF Jet you can find!!! Super stable for beginner, Super low speed for safety, Super low altitude for fun Fabricated by accurate molds with high fidelity of real airplane Excellent stability and aerobatic capability High roll rate Digital Proportional Motor Speed Control Easy to Fly, Easy to Control, Super stable for beginner Slow Speed Flying Capable, Good for Beginner Suitable for both beginners and experienced pilots Approximately 10 minutes flight time on each charge - Optional Li- poly battery will help to achieve better performance and longer flight time. All spare parts and accessories are available Wingspan: 780mm (30.7 in) Length: 1230mm (48.5 in) Flying Weight: 1000g (35.3 oz) Drive System: 70mm Ducted Fan (Powerful Outrunner Brushless Motor) Servo: 5X 9g high speed micro servos Speed Controller: 50 Amp Brushless Speed Control Airplane (90% assembled) Missles and Tanks for the |
|
|
ARF AirField RC 70MM EDF RC Jet w/ Brushless Motor+ESC (Tiger) $149 This EDF Jet was also built to be user friendly and ready to fly. The fuselage is pre-assembled and it requires very minimal assembly to get it soaring in the sky. This ARF Version includes a pre-assembled kit w/ brushless motor+esc. It does not come with TX, RX, battery nor charger. 4 Channel Full Function Radio Controlled (Aileron,Elevator,Rudder,Throttle) Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible Excellent hedgehopping performance High speed, flying speed at 80mph+!!! Excellent stability of nosing up and down State of the art components such as Outrunner Brushless Ducted Fan, 45amp Speed Control, and 2200mah 20C 14.8 Volt Li-Po Battery Pack Steer-able nose landing gear Rudder helps steer plane on ground on its scale landing gear for easy take off Super tough, lightweight airframe! Shock Resistant Reinforced fuselage and Strong Wings Can Take Off From Ground or Hand Launched Ground Take-Off can be performed easily Excellent Flight Performance Super easy and super stable electric powered scale R/C park flyer for beginner or middle-level users Stable inverted flight Fuselage with pre-installed Electronics, Motor, Servos, and Speed Controller Superb Quality, Simply the Best RTF Jet you can find!!! Super stable for beginner, Super low speed for safety, Super low altitude for fun Fabricated by accurate molds with high fidelity of real airplane Excellent stability and aerobatic capability High roll rate Digital Proportional Motor Speed Control Easy to Fly, Easy to Control, Super stable for beginner Slow Speed Flying Capable, Good for Beginner Suitable for both beginners and experienced pilots Approximately 10 minutes flight time on each charge - Optional Li- poly battery will help to achieve better performance and longer flight time. All spare parts and accessories are available Wingspan: 780mm (30.7 in) Length: 1230mm (48.5 in) Flying Weight: 1000g (35.3 oz) Drive System: 70mm Ducted Fan (Powerful Outrunner Brushless Motor) Servo: 5X 9g high speed micro servos Speed Controller: 50 Amp Brushless Speed Control Airplane (90% assembled) Missles and Tanks for the |
|
|
ProJet's Newest Dual 70MM F4E Navy Fiberglass Ducted Fan RC Jet w/ Retract-Ready $249.95 ProJet, the new rising star in extreme performance radio control planes is proud to bring you a highly sophisticated fiberglass-made F4E Navy kit. This F4E rc jet is designed to blast through the sky with a dual set of 70mm fans at blazing sonic speed. The jet is extremely high detail and high quality. When in the air, it is packed with speed and performance. Definitely will not disappoint those that want only the best of the best. More details coming soon. To stay connected with the progress of the F4E, please fan us on Facebook or subscribe to our YouTube channel for the latest video reviews and flight highlights. Note: The F4 Standard Edition only comes with fixed landing gear and does not come with the bombs and missiles. This is also only a airframe version. No radio/electronics are included. Must purchase separately. Kit requires user to assemble. Must have prior knowledge in RC before purchasing this kit. Length = 52 inches Width = 36 inches Requirements: (2) ESC's = 60A-100A (2) 70mm EDF's Battery 4s-6s 2200mah-4000mah depending on the setup 6 servos if used with the standard package without the retracts servo specs are 12g-16g size 4 Channel minimum for basic setup but recommended to use a programmable 6ch and up for more flight features (such as: retracts, lights, flaps, and etc) 4 Channel Receiver and Up Transmitter/RX = 4ch and up |
|
|
2.4G Extreme Detail 4-Channel AirField RC F18C 670mm (26.4") Radio Control EDF Jet w/ Brushless Motor/ESC/Lipo 100% RTF *Super Scale* Ducted Fan RC Jet (Wh $145.7 The F-18 Fighter is modeled after the F/A-18 Hornet, which fulfilled fighter and aircraft duties. The first prototype of the Hornet was introduced on November 18, 1978. It entered service to the US Navy and Marine Corps in 1981. The Hornet has proven itself time and time again during Desert Storm, Operation Southern Watch and the Desert Fox strikes against Iraq in December of 1998. During Operation Iraqi Freedom, Hornets dominated the aerial campaign by carrying out strikes, close air support, refueling, anti-shipping, and forward air control missions. True to the original, this F-18 EDF Jet has everything: high-speed flying, real jet style aerobatics and has one of the finest low-speed characteristics of any ducted fan airplane ever.Larger than most EDFs and pushers, the F-18 has a huge presence in the sky, just like the real Hornets. The F-18 Fighter is made with high-quality foam which gives it unparalleled durability. The RTF (ready to fly) kit includes a ducted fan unit and brushless motor; assembled and balanced. With little assembly time, you can quickly get this jet up in the sky. This is simply the best looking and most affordable EDF in its class. WINGSPAN : 670mm (26.4 inches) LENGTH : 960mm (37.8 inches) WEIGHT : 620g (22oz) BATTERY : 11.1V Li-Po Battery POWER SYSTEM : 64mm Ducted Fan With Outrunner Brushless Motor RC SYSTEM : 4 Channel, 5 Servos And 1 Brushless ESC Does Not Include AC Wall Charger |
|
|
HobbyWing C-Platinum-150A-OPTO-V1 Brushless ESC for 600/700 Helis and Giant RC Plane $109 Model Platinum-150A-PRO Manual User Manual Preview Platinum-150A-PRO ESC belongs to Hobbywing's "Platinum" series products line, it is the most significant top-class product for aircraft and helicopter. 1 Typical Applications 1.1 Very powerful for 600 class helicopter (Working with 6 cells Lipo battery) 1.2 Very powerful for 700 class helicopter (Working with 6 cells Lipo battery) 1.3 Very powerful for huge scale aircraft such as F3A (Working with 6 cells lipo battery) 2 Specification 2.1 Output: Continuous 150A, burst 220A up to 10 seconds. 2.2 Input Voltage: 2-6 cells lithium battery or 15-18 cells NIMH battery. 2.3 BEC: None. 2.4 Control Signal Transmission: Optically coupled system. 2.5 Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: BrushLess Motor) 2.6 Size: 88mm (L) * 55mm (W) * 16mm (H). 2.7 Weight: 125g. 3 Features 3.1 High performance microprocessor brings out the best compatibility with all kinds of motors and the highest driving efficiency. 3.2 Wide-open heat-sink design to get the best heat dissipation effect. 3.3 With 3 types of start mode: Normal / Soft / Very-Soft, compatible with aircraft and helicopter. 3.4 Smooth, linear, quick and precise throttle response. 3.5 The throttle signal is transfered through optically coupled system to avoid the electromagnetic interference. 3.6 Multiple protection features: Low-voltage cut-off protection / Over-heat protection / Throttle signal loss protection. 3.7 Perfect governor mode for helicopter. 3.8 The firmware of the ESC can be updated through the USB adapter on the Professional LCD Program Box. 3.9 User programmable. Several kinds of program methods are supported: transmitter, digital LED program card, advanced professional LCD program box, PC software. Very easy to program the ESC at home or at the flying field. |
|
|
HobbyWing C-Platinum-100A-V1 Brushless ESC for 550/600 RC Heli and Giant Aircraft $89 Model Platinum-100A-PRO Manual User Manual Preview Platinum-100A-PRO ESC belongs to Hobbywing's "Platinum" series products line, it is the most significant top-class product for aircraft and helicopter. 1 Typical Applications 1.1 Very powerful for 550 class helicopter (Working with 6 cells Lipo battery) 1.2 Very powerful for 600 class helicopter (Working with 6 cells Lipo battery) 1.3 Very powerful large scale aircraft 2 Specification 2.1 Output: Continuous 100A, burst 150A up to 10 seconds. 2.2 Input Voltage: 2-6 cells lithium battery or 5-18 cells NIMH battery. 2.3 BEC: Switching mode DC-DC regulator. 3A@5.25V or 3A@6V switch able by user progromming. 2.4 Control Signal Transmission: Optically coupled system. 2.5 Max Speed: 210,000rpm for 2 Poles BLM, 70,000rpm for 6 poles BLM, 35,000rpm for 12 poles BLM. (BLM: Brushless Motor) 2.6 Size: 70mm (L) * 34mm (W) * 16mm (H). 2.7 Weight: 82g. 3 Features 3.1 High performance microprocessor brings out the best compatibility with all kinds of motors and the highest driving efficiency. 3.2 Wide-open heat-sink design to get the best heat dissipation effect. 3.3 With 3 types of start mode: Normal / Soft / Very-Soft, compatible with aircraft and helicopter. 3.4 Smooth, linear, quick and precise throttle response. 3.5 The throttle signal is transfered through optically coupled system to avoid the electromagnetic interference. 3.6 Multiple protection features: Low-voltage cut-off protection / Over-heat protection / Throttle signal loss protection. 3.7 Perfect governor mode for helicopter. 3.8 The firmware of the ESC can be updated through the USB adapter on the Professional LCD Program Box. 3.9 User programmable. Several kinds of program methods are supported: transmitter, digital LED program card, advanced professional LCD program box, PC software. Very easy to program the ESC at home or at the flying field. |
|
|
de Havilland Tiger Moth 120 - 76" ARF Nitro Gas Radio Remote Control RC Airplane $199 de Havilland D.H Tiger Moth - 120 Giant Scale Radio Remote Control RC Bi-Plane ARF RC Bi-Plane "A charming touring plane that's almost ready to fly." Derived from the highly successful D.H. 60 Moth series of civilian aircraft that included the famous Gypsy Moth, the de Havilland D.H. 82A Tiger Moth is the quintessential British biplane trainer. The Tiger Moth has long been popular with modelers, and now with our low low price, you can, too, be own a part of this fascinating history. Our Tiger Moth 120 is a Almost-Ready-to-Fly model, built with all balsa and plywood. All parts are precovered with our quality film coating material. IMAA-legal dimensions contribute to its realistic flight characteristics and enhance the plane's incredible attention to detail. Whether you're a serious scale aircraft builder or an aspiring r/c sport flier?or both?you will be thrilled to own and pilot one of the world's most beautiful plane! Top quality balsa and plywood construction All wood constructions with fiberglass parts Trimmed and painted cowling by fuel proof paint Hand iron-on color film covering Comes with all hardware and accessories Wing span: 76in / 1930mm Wing area: 1830sq in / 118 sq dm Flying weight: 9.0lb / 4086g uselage length: 65.5 in / 1664 mm Engine Required: 4c 1.40cu in Radio Required: 4 channels,5 servos High-quality hardware is included for convenience. Best suited for the power and realistic sound of a 4-stroke engine, but will also fly well on a 2 cc engine within the recommended range. Dual aileron servos simplify assembly, and deliver more precision and authority to flying maneuvers. Ready for flight in as little as 20-25 hours. Most of the interlocking, all-wood parts have already been assembled into easy-to-assemble sections FLYING Takeoffs for the Tiger Moth 120 are very easy, even in slight crosswinds, and require very little rudder correction. Scale takeoffs are best achieved by slowly advancing the throttle and holding a bit of up-elevator as the model starts to roll. Even with only a lO mph headwind, the model will lift off within a few feet when you apply full power. Turns require a bit of coordinated rudder, especially during the climb-out. The model is capable of amazingly slow flight. Though not dramatic, deployment of the leading-edge slats enhances slowspeed control. The Tiger Moth could never be mistaken for a jungmeister, but it is nevertheless quite capable of many aerobatic maneuvers. Really nice loops, stall turns and wingovers are all easily within its capability, though its roll performance leaves something to be desired. Even with differential aileron and the judicious use of the rudder, an alarmingly slow barrel roll is the best that I can achieve. The Tiger Moth was very popular back in the days, and its work has inspired many replicas of its kind. Now NitroModels is proud to bring you one of the b |
|
|
30-amp Esky High Quality RC Airplane Electronic Speed Controller $26.95 Now electric flight fans have a new choice when it comes to high-performance speed controls for their aircraft. NitroPlane's new selection of 5-, 10-, 20-,30-,40-, and 50-amp ESCs are loaded with the kinds of features they demand at a very affordable price. The 30-amp ESC is the answer to your electronic speed controller needs for aircraft such as Hangar 9's Aspire(tm) EP or E-Flite's Odyssey EP. It can handle up to 25 amps of continuous current and is best suited for speed 400 or 550 electric motors. It comes pre-wired with a Tamiya-style connector and bullet-style motor connector. The 30-amp ESC also features an arming switch, thermal protection, and polarity protection. Its auto-shutoff feature senses when battery voltage is low and cuts power to the motor so enough power is available to the control surfaces for a safe landing Features For use with Speed 400 motors and 550 Proportional forward only (no brake) 30-amp continuous current Thermal overload protection Auto cut-off with BEC Pre-wired with connectors [Products Sepcs]: Item Size(L*W*H) Weight(g) BEC POWER CUT OFF VOLTAGE BEC BEC POWER Reset con.Current Battery Range mm EK2-0601 38*17*7.5 10 √ 4v √ 1.5A/5V throttle lowest 30A 5-10 Cells |
|
|
50-amp Esky High Quality RC Airplane Electronic Speed Controller $32.95 Now electric flight fans have a new choice when it comes to high-performance speed controls for their aircraft. NitroPlane's new selection of 5-, 10-, 20-,30-,40- and 50-amp ESCs are loaded with the kinds of features they demand at a very affordable price. The 50-amp ESC is the answer to your electronic speed controller needs for aircraft such as Hangar 9's Aspire(tm) EP or E-Flite's Odyssey EP. It can handle up to 25 amps of continuous current and is best suited for speed 400 or 550 electric motors. It comes pre-wired with a Tamiya-style connector and bullet-style motor connector. The 50-amp ESC also features an arming switch, thermal protection, and polarity protection. Its auto-shutoff feature senses when battery voltage is low and cuts power to the motor so enough power is available to the control surfaces for a safe landing Features For use with Speed 400 and 550 motors Proportional forward only (no brake) 50-amp continuous current Thermal overload protection Auto cut-off with BEC Pre-wired with connectors [Products Specs]: Item Size(L*W*H) Weight(g) BEC POWER CUT OFF VOLTAGE BEC BEC POWER Reset con.Current Battery Range mm EK2-0603 38*17*7.5 12 √ 4v √ 1.5A/5V throttle lowest 50A 5-10 Cells |
|
|
2.4G Colco Apache 4 Channel Co-Axial RC Helicopter $89.95 Feature: Improved version! This is the new version with a lot of adjustment and improvements 4 Channel remote control set 2.4Ghz includes complete Forward/Backward, Left/Right, Up/Down control (RUDDER, AILERON, ELEVATOR, AND THROTTLE) New Look Transmitter, New Look Cabin, Improved Mixer/Gyro Control, More Stable Flight, even first timer can control easily Coaxial counter-rotating blades cancel out the rotational torque that makes hovering a conventional helicopter so difficult. Precise controlling and hovering SUPER STABLE X-ROTATION SYSTEM, Easier to control than Original LAMA Dual counter rotating rotor which eliminates the need for a tail rotor Rudder is controlled using variation in speed of each level of the rotor blades Reliable high quality mixer with built-in gyro board Pre-positioned servo mounts for easy set up Scale appearance Factory Pre- assembled, zero assembly time Suitable for Indoor/Outdoor/Backyard/Park Powered by 800mAh Li-polymer battery. Longer flight time. The main rotor blades are using top quality plastic materials, which is not easily break Digital Proportional Motor Speed Control Separate servos from mixer, more precision movement Trimming of servos can be done both on helicopter or on transmitter The Sliding swash plate can help you operate the R/C Helicopter Freely Approximately 15 minutes flight time on each charge - Optional Li- poly battery will help to achieve better performance and longer flight time Best choice for Beginner - Advanced hobbyist Can be hovered with so much ease, you can do it with only one hand. Your Kid will LOVE it, Good for any Age group, Male or Female All spare parts and accessories are available Complete Kit, Ready to Fly (Everything is included and 100% assembled -- only required 8 AA batteries for the transmitter to start flying) Specification: Main rotor diameter: Approx. 340 mm (13.4 inch) Tail rotor diameter: Approx. 57 mm (2.25 inch) Overall length: Approx. 450 mm (17.7 inch) Overall height: Approx. 195 mm (7.7 inch) All-up weight: Approx. 260g (Battery included) Driven system: 2* 180 carbon brush motor Servo: 2X 7.6g Servos and inside Gyro Battery: 7.4V 1000mAh Li-polymer Control system: 4CH 2.4Ghz Remote Control Transmitter Radio Control Range: 2500 feet (762m) Package Include: 4 Channel Multifunctional FM R/C Transmitter Helicopter (100% Assembled) 100 ~ 240V Wall Battery Charger High Quality 7.4V 1000mAh Li-Polymer Rechargeable Battery Extra Pair of Main Blades Instruction Manual |
|
|
Dynam Vortex 370 4 Channel Co-Axial RC Helicopter Ready to Fly RTF $99.95 Big Co-Axial Vortex 370 for Outdoor and Indoor, The 4 channels Vortex 370 coaxial helicopter comes everything you need to fly right out of the box. Outdoor flight radio controlled helicopter or perfect for Indoor for the best stable flight. Great power, and super stable. You will be amazed at how EASY it is to fly a 4-channel rc helicopter like the Vortex 370. Specification: Specifications: Main rotor diameter : 460mm Length: 510.2mm Width: 92mm Height: 100mm Weight RTF : 400g Main motor: 370motor (2 pcs installed) Transmitter: 4 CH (including training switch and simulator port) Mix controller: 3 in 1 controller Servo: 9g Battery: 11.1V 900mAh Li-Po Feature: Co-axial Counter-rotating double blades system Easy to fly with simple operation, designed for beginner Ready to fly out of box Digital servo with precise movements and sensitive reaction, efficient in control Simple structure of landing skid ensures convenient adjustment and maintenance This combined with two digital servos, ensures rapid response, precise control and nimbler movement. With this system, several flyers can operate simultaneously within the same area, ensuring a safe and fun flying experience Function by FM Remote Control 72Mhz Mode 2 Package Include: Helicopter (100% assembled) 4 Channel FM Remote Control Rechargeable 11.1V 900mAh Li-Poly battery AC wall battery charger English Manual |
|
|
|
April 12th, 2009 in
RC Airplanes