RC Thunder Tiger Titan
RC Thunder Tiger Titan
 |
 MAIN GEAR PV0723 THUNDER TIGER MINI TITAN RC HELICOPTER  US $12.51
|
_________________________________________________________________________________
 |
RC Helicopter Bearings - THUNDER TIGER RAPTOR 50 TITAN Sale Price: $144.95  |
|
Econo RC Helicopter Bearing Kit. Our Economy line of RC Helicopter bearings are intended to be the most affordable way to replace stock bearings. These bearings have chrome steel races, balls, retainers and shields... |
|
|
2.4GHz Thunder Tiger E325 3D RC Helicopter Super Combo $479.99 TTR4710-F06M2A1 Thunder Tiger E325 Super Combo 2.4Ghz RC Helicopter Detailed Description Overview 3D Performance + 2.4GHz Radio System = 100% Thrills The mini Titan E325 super combo is a ready-to-fly 3D helicopter package combining the advanced SkyMaster TS6 2.4GHz 6-CH radio system and iFHSS technology.From radio system to electronic speed control, high-performance brushless motor and servos, all the best is included. Go fly and experience 100% thrills Features ? iFHSS 2.4G Radio System ? Super strong and lightweight one-piece main frame ? One-piece molded landing skid ? Easily accessible and removable motor to change pinions ? High-positioned battery tray for crisp aerobatics ? Changeable Bell-Hiller mixing ratio for different flying styles ? 120 degree ECCPM control system ? Main rotor grips with 2 radial and a thrust bearing. ? Full autorotation system ? Entire tail assembly detaches for easy transportation and storing ? Precise tail pitch control system Mini Tiitan E325 2.4G Super Combo includes: ? E325 2.4G Super Combo with new scheme canopy, main wood blades. ? ACE RC TS6 Radio system (TS6 transmitter + TRS601DD 6ch 2.4 G receiver) ? Li-Po battery & Transmitter battery ? Instrucion Manual ? Quick Start Guide ? ACE RC T3AC Li-Po charger & Transmitter charger (except New Zealand & Australia editon) ACE RC TS6 - iFHSS 2.4G radio system transfers from Innovator ACE RC TRS601DD 2.4G receiver OBL 29/35-10H Brushless Motor ATG-6100M Gyro + E-CCPM Mixer C0915 Micro Rudder Servo C1016 Micro Servos |
|
|
2.4GHz Thunder Tiger Raptor 50 V2 RC Helicopter Super Combo Kit $949 TTR4853-F08M2A1 Thunder Tiger Raptor 50 V2 RC Helicopter Super Combo 2.4Ghz Detailed Description Overview Ego Booster !!! The machine comes all fitted in a Super Combo specifically designed for the most demanding pilots out there. An advanced 2.4G radio system, a metal main rotor hub with button, an exclusive sport edition Redline 53HX engine fitted with Redline pipe muffler, and a brand new FRP canopy in striking colors are just some of the most visible upgrades. A closer look also reveals an extended tail boom to fit 620mm blades, push-pull control system, rear-mounted tail servo tray, and reinforced main shaft. 3D pilots will be amazed by the Raptor 50 SC?s crisp response, and beginners will love it for its stability. Features ? Redline power system ? Rotor Head upgrade to 3D suite ? Exclusive FRP canopy & decals for 2.4G edition ? Includes FRP main rotor blades ? Longer tail boom to fit 620mm blades ? Stainless steel flybar & linkage rods ? Harden main shaft ? Heavy-duty clutch bell ? Push-pull control system Raptor 50 2.4G Super Combo includes: ? Raptor 50 with 3D suite main rotor head ARF x 1 ? Red Line power system (Exclusive RL-53HX engine & RL Muffler) x 1 set ? ACE RC TS6i 2.4G 6-channel radio system (Tx with Module + Rx) x 1 set ? ACE RC TG-7000 Heading Lock Gyro x 1 ? ACE RC DS0606 digital rudder servo x 1 ? ACE RC S1807MG surface control servo x 4 ? Exclusive FRP main baldes x 1 pair ? Batteries & Tx charger ? Raptor 50 Titan Instruction Manual x 1 ? Additional Manual (Upgrade to 3D suite) x 1 ? ACE RC TS6i Instruction Manual x 1 ? All electric devices Instruction Manuals x 1 set ACE RC TS6i - iFHSS 2.4G radio system ACE RC TRS601DD 2.4G receiver ACE RC TG-7000 Heading Lock Gyro |
|
|
2.4GHz Thunder Tiger Raptor 30 RC Helicopter V2 Super Combo Kit $689.99 TTR4839-F08M2A1 Thunder Tiger Raptor 30 V2 RC Helicopter Super Combo 2.4Ghz Detailed Description Overview This is the smallest machine among the nitro-powered Raptor family and it comes in a 95% pre-assembled package with everything from the gyro to the control linkages. The programmable Sky Tech TS6i programmable transmitter has been setup for fast and easy learning and gives you room to grow as your skill levels develop. The Super Combo includes everything and is a great introduction to nitro heli flying, and the novice nitro pilot does not need to worry about systems compatibility anymore. All is taken care of and you only need to focus on how to get the helicopter in the air. Features ? Adopt iFHSS 2.4G radio system, 6-ch multi fuction & 8 model memory radio. ? New designed shceme & decal. ? Rugged Collective Pitch Control Arm ? 6mm Engine Starting Shaft ? Solid 6mm Spindle ? Oversized Tai Rotor Grip as R60 ? Lengthened Vertical Fin by 10mm ? Rigid Boom Support With Plastic End ? Wider Tank with 340cc Capacity ? Complete line of optional parts available. ? Super Combo Version, everything you need included. Raptor 30 2.4G Super Combo includes: ? Raptor 30 V2 x 1 ? PRO-39H(R) x 1 ? Sky Tech TS6i Radio System x 1 set (Including Tx/Rx battery and charger) ? S1903 Standard Servo x 4 ? DS0606 Digital Rudder Servo x 1 ? TG-7000 Heading Lock Gyro x 1 ACE RC TS6i - iFHSS 2.4G radio system ACE RC TRS601DD 2.4G receiver ACE RC TG-7000 Heading Lock Gyro ACE RC DS0606 digital rudder servo ACE RC S1903 control surface servos PRO-39H(R) heli engine Specifications |
|
|
Tiger Moth 120 - 76" Parts: Fuselage $70 Tiger Moth 120 - 76" Parts: Fuselage |
|
|
F/A 18E Phantom Tiger Version: Bombs $6 F/A 18E Phantom Tiger Version: Bombs |
|
|
F/A 18E Phantom Tiger Version: Landinggears $7 F/A 18E Phantom Tiger Version: Landinggears |
|
|
CMP P40 Warhawk 50 - 54" Nitro Gas ARF Radio Remote Controlled RC Airplane RC "Tiger Shark" Plane $299 This P40 Warhawk has a fiberglass fuselage and cowl painted in vague colors. The rib wings are covered with Solartex and airbrushed to match the color of the whole aircraft. The wood that makes up both the wings and the fuselage are all laser cut. The high precision of fiberglass and fine painting work make this kit an extremely realistic aircraft. It is a perfect combination between scale looks and excellent flying performance. The kit comes with a full color decal sheet, wheels and a fuel tank. This war bird is a must fly! What the Pro says! Just to clear up some confusion, and a lot of misinformation on the internet...CMP is not Willhobby, or FlyModel, or any other company. CMP is thier own company, and they have been around for while. I have built a few of their planes, and found the quality to be quite exceptional, they are high-end stuff, and from a scale point of view, nobody else comes close. The P-40, from a scale aspect, blows away the Hangar 9 and everybody else's P-40. The paint job is dead flat and perfect, and there are a ton of factory-installed water transfer decals, a beautiful glass belly tank, strut covers, prepainted canopy frame, lots of nice stuff. All the hardware is exceptional, too, with a fiberglass pushrod for the elevator, and a pull-pull system for the rudder. You need to be careful flying it, though. It has no washout, it's not light, and it will tip stall if you pull too hard or get too slow. The big problem, though, is that the CG in the manual is actually for the much larger 71" one, and will leave you very tailheavy if you don't correct it to about 85mm from the LE. It's really, really important. If you fly off grass, you will have really hard time finding rotating retracts that will hold up. Seriously consider fixed gear like I used. I flew mine with a Saito 62, fit perfectly and was plenty of power. Let's here some other comments, this is a beautiful plane.. For more reviews and comments on other NitroPlanes.com products by rc enthusiasts, click here. *RETRACT NOTE* The retract bays are built into the wing from the factory, so the retracts will drop right in. Wing Span: 53.5" Weight: 5.64lb Length: 46" Wing Loading: 26.97oz./sq.ft. Wing Area: 480sq.in Engine 2c 40~46, 4c 52~63 Radio 4~5 Channel 5~6 Servos The kit box is nice packed, with all the major parts well packed in a light foam wrap and clear plastic bags. All wood rib wing, nicely covered, rivets decals already applied, ailerons hinged and installed. Horizontal, elevators and rudder also all wood, air foiled surfaces, hinged and ready. Fuselage is very detailed with panel lines molded in, glass work is outstanding. Tiger mouth decal, dashboard decal and many others perfectly applied. Drop tank included and assembled. Slots in the interior cardboard held all items tightly |
|
|
Tiger Moth 120 - 76" Parts: Tail and Rudder $12 Tiger Moth 120 - 76" Parts: Tail and Rudder |
|
|
Exceed RC F-5E 64MM Ducted Fan Jet Swiss Tiger Version* Receiver-Ready Version * $279.95 This is a Receiver-Ready F-5E 64MM EDF Jet. User is required to have their own TX+RX. F-5E Ducted Fan Jet Wingspan: 532mm Length: 939mm Flying Weight: 500g Wing area: 7dm2 Wing Load: 70g/dm2 5 9 gram servos 64MM Ducted fan Brushless Powered: Powerful 14L inner runner brushless motor and 25A ESC Battery: 1300Mah, 11.1V, 20C. Additional Requirement: Radio System: 4Ch Tx and 6 Ch Rx , |
|
|
AirField 70MM Brushless EDF F-16 Tiger Jet Electric Ducted Fan RC Jet w/ Bombs RTF $399.95 This 70mm F-16 Fighter is a high quality EPS foam model of the famous ?Fighting Falcon?. The F-16 is known as the ?Viper? in US service. It was the first fighter designed to sustain 9g maneuvers. One of the outstanding features is its frameless bubble canopy, which gives excellent all-round vision. The F-16 has been and will remain the multi-role workhorse of the United States Air Force. The F-16 was the main fighter used in the 1991 Gulf War and is still used in today?s ?War on Terror?. The Air National Guard regularly deploys these fighters to the Middle East. In honor of the US Fighters, it is only appropriate that we built these jets with extra care and fine detail. It is painted with an excellent finish to make it look just like the real thing. No details were left out, from the after burner, the missiles, to the predominant nose. To do the F-16 justice, we used the newest electronics and gave it the U.S. Air Force look. Even though we went out of the way to mirror the real F-16, this EDF Jet was also built to be user friendly and ready to fly. The fuselage is pre-assembled and it requires very minimal assembly to get it soaring in the sky. 4 Channel Full Function Radio Controlled (Aileron,Elevator,Rudder,Throttle) Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible Excellent hedgehopping performance High speed, flying speed at 80mph+!!! Excellent stability of nosing up and down State of the art components such as Outrunner Brushless Ducted Fan, 45amp Speed Control, and 2200mah 20C 14.8 Volt Li-Po Battery Pack famousus "Cobra Maneuver" available Steerable nose landing gear Rudder helps steer plane on ground on its scale landing gear for easy take off Super tough, lightweight airframe! Shock Resistant Reinforced fuselage and Strong Wings Can Take Off From Ground or Hand Launched Ground Take-Off can be performed easily Excellent Flight Performance Super easy and super stable electric powered scale R/C park flyer for beginner or middle-level users Stable inverted flight fuselage with pre-installed Electronics, Motor, Servos, and Speed Controller Superb Quality, Simply the Best RTF Jet you can find!!! Super stable for beginner, Super low speed for safety, Super low altitude for fun Fabricated by accurate molds with high fidelity of real airplane Excellent stability and aerobatic capability High roll rate Digital Propor |
|
|
70MM 4 Channel F-16 Fighting 3D Aerobatic Remote Control Electric Ducted Fan RC Fighter Jet RTF Tiger Version $179.95 The F-16 Fighting Falcon (Tiger Version) is a multirole jet fighter aircraft originally developed by General Dynamics for the United States Air Force. Designed as a lightweight, day-time Visual Flight Rules (VFR) fighter, it evolved into a successful multirole aircraft. The Falcon's versatility is a paramount reason it has proven a success on the export market, having been selected to serve in the air forces of 25 nations. This 4CH F-16 Fighting Falcon (Tiger Version) EDF Jet RTF (Ready to Fly) unique design featuring a single ducted 70mm fan unit, while retaining twin engine look; precision molded EPS airframe with outstanding detail and scale appearance. F-16 has excellent flying characteristics, will loop, roll, fly inverted, and do most other manevuvers. Jet has steerable nosegear, with a very powerful pre-installed power system which will allow for quick takeoffs. Battery is a lithium-polymer. Features 4 Channel Full Function Radio Controlled (Aileron,Elevator,Rudder,Throttle) Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible Excellent hedgehopping performance High speed, flying speed at 80mph+!!! Excellent stability of nosing up and down State of the art components such as Outrunner Brushless Ducted Fan, 45amp Speed Control, and 2200mah 20C 14.8 Volt Li-Po Battery Pack famousus "Cobra Maneuver" available Steerable nose landing gear Rudder helps steer plane on ground on its scale landing gear for easy take off Super tough, lightweight airframe! Shock Resistant Reinforced fuselage and Strong Wings Can Take Off From Ground or Hand Launched Ground Take-Off can be performed easily Excellent Flight Performance Super easy and super stable electric powered scale R/C park flyer for beginner or middle-level users Stable inverted flight fuselage with pre-installed Electronics, Motor, Servos, and Speed Controller Superb Quality, Simply the Best RTF Jet you can find!!! Super stable for beginner, Super low speed for safety, Super low altitude for fun Fabricated by accurate molds with high fidelity of real airplane Excellent stability and aerobatic capability High roll rate Digital Proportional Motor Speed Control Easy to Fly, Easy to Control, Super stable for beginner Slow Speed Flying Capable, Good for Beginner Suitable for both beginners and experienced pilots Approximately 10 minutes flight time on each charge - Optional Li- poly battery will help to achieve better performance and longer flight time. All spare parts and accessories are available Ready to Fly, Easy to Assemble (90% assembled ) Specifications Wingspan: 780mm (30.7 in) Length: 1230mm (48.4 in)Flying Weight: 1000g (35.3 oz) Drive System: 70mm Ducted Fan (Powerful Outrunner Brushless Motor) Servo: 5X 9g high speed micro servos Speed Con |
|
|
Nitro Gas Car Glow Plug Starter Kit for HPI,TRAXX,THUNDER-TIGER,SMARTECH,CEN-RACING,MAXX-TURBO,ETC All Nitro Remote Control RC Cars $39 "BRAND NEW" Nitro Gas Car ACME GAS STARTUP KIT. REQUIRE FOR ALL NITRO GAS CARS TO WORK!!! It will work with ALL Nitro Cars (HPI,TRAXX,THUNDER-TIGER,SMARTECH,CEN-RACING,MAXX-TURBO,ETC) This starter kit has everything you ever needed to power-up your RTR Nitro Gas car...Just fill up the bottle with gas and you're ready to rock !!! NOTHING ELSE. The Smartech Starter Kits is built tough for easy usage in the field. It is designed to work with any cars applications . This Kits include: Glow Starter with Charger - Unlike other Nitro Glow Starter, this one can be used over and over many times! 250 cc Fuel Pump Big Cross Multi-Purpose Wrench Mini Cross Multi-Purpose Wrench 2 Mini Screw Drive + and - |
|
|
300DF Outrunner RC Brushless Motor for Electric Radio Remote Control Planes (Recommended for Slow Stick RC Flyer) 2250 RPM $75 The 300DF is a light motor, designed to fly park flyers. Use the 300DF with a 3:1 or gearbox and large prop 8x4, or a speed demon on a 5x3 inch or smaller prop. 2 cell Lipo or 3 cell Lipo can be used with all this motor, but best performance can be achieved by using 3 cells+4.5:1 gear ratio with 12X6, or 11X7 or 11X4.7 props. The data for other props and gears: For 3.4:1 gearing use 11x7 HD, 11x4.7 SF For 4.5:1 gearing use 12x6, 11X4.7, 11X7 SF 300DF pusher props have proven to be spectacular. It has been flown with Wing Warrior Zaggis, Wattage HyperWing and Edge RC delta wing planes. Using a small prop direct drive and wings around 16 Oz weight, this is the best you can get at this price. With a 5x4 prop it draws about 12 amps. It is equally good with large props in a gearbox. So decide whether you want speed - 50+ MPH or slow fly with large props and a lot of torque and use this motor for both. Specifications Max Current: 10 Amps. KV: 2250 Weight: 29.7 grams Shaft Diameter: 2.3mm Mount holes: standard 16.5 & 19.5 We have done extensive testing on this motor and are really excited about putting it into action in some of our IFO's, Tiger Moths (can you say 3D Tiger Moth), PT-17, and any plane 12 oz's or less should go 3D ! The motor has been tested and works well with two and three LiPo cells in series. I like them on three LiPos ! A two cell runs between 6 and 8.4 volts. A three cell runs between 9 and 12.6 volts, depending on the state of charge. See the Tech Chart to figure out what type of performance you'll get with these motors. |
|
|
Nitro Starter Kit And RC Tool Set $24.99 This is a great kit to have as it includes lots of tools to work on your RC car. If you do not have a glow plug then you will need to buy this kit to start your new nitro car. This starter kit is designed to work with any nitro car application. Our Nitro Gas Car Starter Kit will work with all brand Nitro Gas Cars (HPI, Smartech,Thunder-Tiger, Traxx, Cen-Racing and more!) Each Starter Kit Includes: Rechargeable Glow Plug Igniter Charger Fuel Pump Large Cross Wrench Small Cross Wrench Mini Screw Driver |
|
|
Tiger Version F-16 "Fighting Falcon" 64mm EDF Electric Ducted Fan RC Jet RTF w/ Brushless Motor+ESC+LiPo $199 This 64mm F16 is a high quality EPS foam model of the famous FIGHTING FALCON, an extremely popular fighter jet to model, and FMS has done extremely well in creating a superb flying model of the F16. With an excellent paint finish, extremely smooth and well filled you can hardly tell this beauty is foam! The F16 goes together in a few snaps. Tthe fuselage is pre-assembled, pre-installed with all the newest electronics and painted in a U.S. Airforce version! Very minimal building required to get the F16 in the air. The F16 is designed to be taken off on hand launched, and is a really fine-flying aircraft. VERY scale, sexy, sleek and FAST! You need to keep good eyes when flying this baby. Great vertical performance. Comes 100% Ready-to-Fly with all electronics pre-installed. Included 4-Channel Full-Function Transmitter. Bottomline, the F16 is one of the best ducted fan jet in the market! Feature: Futaba-Stanard 4 Channel Full Function Radio Controller (Aileron, Elevator, Throttle) Full aerobatic characteristics of a real airplane w/ Digital Proportional Motor Speed Control Excellent flying performance and very stable, very fast at over 70mph! Fuselage-preinstalled w/ the high quality Outrunner Brushless Ducted Fan, 25amp Speed Control, and 1300mah 20C 11.1 Volt Li-Po Battery Pack Super tough, lightweight foam plane w/ shock resistance airframe and strong durable wings! Perfect scale appearance w/ detailed body structure Excellent Flight Performance Great plane for intermediate pilot who's ready for the next level in radio control plane Excellent inverted flight control and high roll rate Approximately 10 minutes flight time on each charge All spare parts and accessories are available (Visit our Support Forum for Technical Help) 100% Ready to Fly in Just Minutes! Complete Kit, Easy to Assemble (Everything is included and 90% assembled -- only required 8 AA batteries for the transmitter) Specification: Wingspan: 540mm (21.3 in) Length: 830mm (32.7 in) Flying Weight: 500g (17.6 oz) Drive System: 64mm Ducted Fan (Powerful Outrunner Brushless Motor) Servo: 4X 9g high speed micro servos Speed Controller: 25 Amp Brushless Speed Control Battery: 11.1V 1300mah 20CLi-Polymer Package Include: Airplane (90% assembled) 4 Channel Multifu |
|
|
Super Sale! CMP Model P40 Warhawk 140 - 73 " ARF Nitro Gas Radio Remote Controlled "Tiger Shark" Airplane RC Plane $499 This is so far our highest quality arf plane kit, well priced and almost-ready-to-fly! The P40 Warhawk has a fiberglass fuselage and cowl painted in vague colors. The rib wings are covered with Solartex and airbrushed to match the color of the whole aircraft. The wood that makes up both the wings and the fuselage are all laser cut. The high precision of fiberglass and fine painting work make this kit an extremely realistic aircraft. It is a perfect combination between scale looks and excellent flying performance. The kit comes with a full color decal sheet, wheels and a fuel tank. This war bird is a must fly! Wingspan 1850mm Length 1570mm Weight 4.88~4.95 kg Wing Loading 81~83 dm/2 Airfoil Naca 0014 Wing Area 60 dm/2 Radio Control 4~5 Ch 5~6 Servos purchase separately 2 Strok Engine 108~120 purchase separately 4 Strok Engine 140 purchase separately *RETRACT NOTE* The retract bays are built into the wing from the factory, so the retracts will drop right in. Wing Span: 73" Weight: 10.75lb Length: 62" Wing Area: 930sq.in Wing Loading: 26.64oz./sq.ft. Engine Required: 4c 140 Radio 4~5 Channel 5~6 Servos The kit box is nice packed, with all the major parts well packed in a light foam wrap and clear plastic bags. Slots in the interior cardboard held all items tightly in place, so it will produce no damage from shipping. Included with the kit are fuel tanks, engine mounts, wheels, hardware, pushrods, clear plastic canopy and nose cone, decal sheet, one-piece fiberglass cowls, and fixed wire landing gear plus other necessary hardware. You will need to purchase some building supplies, engines, spinners, servo extensions, and a radio. Mechanical retracts are an interesting option to consider for this plane kit. The quality of the materials is excellent with a one-piece fiberglass fuselage/fin straight and true. The instruction manual has excellent-quality step-by-step drawings. With an 4-stroke engine installed, this P40 Plane will fly, feel, and sound like the legendary Tiger Shark from World War 2. This fierce P-40 Warhawk comes with quality hardware including the spinner. *Propeller to be purchased separately* Decals are ready applied and protected by clear coat. The model is thus very durable and easy to build. The kit comes with fixed landing gear and optional twist and turn retracts fitting. &n |
|
|
RAPTOR 50 TITAN SE KIT, BLUE $349.95 Raptor 50 Titan SE Item No. 4854-K Specification Full Length of Fuselage(mm / in.) 48.03" (1220mm) Full Width of Fuselage(mm / in.) 5.51" (140mm) Total Height(mm / in.) 15.74" (400mm) Main Rotor Dia(mm / in.) 54.53" (1345mm) standard Tail Rotor Dia(mm / in.) 9.29" (236mm) Gear Ratio 8.5:1:4.56 Full Equipped Weight(g/ lbs.) 7.5 lbs (3400g) Content Raptor 50 Titan SE 4854-K10: body only 4854-K11: w/ RL53H, RL Hi-flow 3D muffler, ZERO α Governor & FRP canopy 4854-K12: w/ RL53H, RL Hi-flow 3D muffler, ZERO α Governor, Carbon Blades & FRP canopy Introduction Brace Yourself ! Thunder Tiger introduces the latest Raptor 50 Titan SE. A major upgrade off the original Raptor 50 Titan, the Titan SE features critical metal parts to handle all the power delivered by the RL-53H. Another key feature is that collective pitch has been increased to a range of +/-15 degree. This major modification provides unbeatable pitch response. The helicopter reacts just as quickly as you want. Content / No. No. 9606 RL-53H engine No. 9722 RL Hi-flow 3D muffler No. 8030 ZERO α Governor No. 3878TT V2 Carbon Blades 600mm 4854-K10 x x x x 4854-K11 v v v x 4584-K12 v v v v 4854-K1*R 4854-K1*Y 4854-K1*L *Available in 3 different color schemes (FRP Canopy also available separately, item No. PV6076) Features 1. New design for main rotor hub and mixing lever delivers +/-150collective pitch 2. Positive delta angle for fast & sharp response 3. Nonlinear flapping damper for aggressive 3D flying 4. New clutch support for increased durability 5. New design for metal aileron lever 6. New design for tail support bracket 7. Metal Guide Pulley 8. Metal pulley 9. Carbon 3D vertical fin 10. FRP canopy available in 3 different color schemes Nonlinear flapping damper for aggressive 3D flying Metal Guide Pulley- on tail New design for tail support bracket New clutc |
|
|
|
Thunder Tiger E325 Mini Titan Huey Cobra Helicopter Heli Gunship
