RC Plane Engine Propeller
RC Plane Engine Propeller
 |
 Propeller RC model plane glow engine prop 8x6 pack of 3  US $8.80
|
 Propeller 10x6 RC model plane glow engine prop C/L glo US $3.67
|
_________________________________________________________________________________
|
|
Twin Propeller Set (2pcs) for Petrel RC 2-Channel RC Plane $4 Twin Propeller Set (2pcs) for Petrel RC 2-Channel RC Plane |
|
|
1-Set Propeller (2pcs) for Air Green Petrel 2-CH RC Plane $4 1-Set Propeller (2pcs) for Air Green Petrel 2-CH RC Plane |
|
|
EMB 312 Tucano 120 - 65" Nitro RC Plane ARF: FS120AR ASP 4-stroke Engine for Nitro RC Planes $304.62 Specification Disp(cc): 19.96 Bore(mm): 30.4 Stroke(mm): 27.5 Propeller(recommended):13x6 Practical range(r.p.m): 2000--11500 Weight(g): 1000 |
|
|
2-Channel SD Yellow Bee RTF Electric Radio Remote Controlled RC Plane $89 NEW! Ready to fly out of its box! Complete system with radio, rechargeable battery and AC charger! Each battery has 10+ minutes of air-time!!! SD3382 Yellow Bee Twin Engine Complete RC Airplane ....... **A Great First Plane for Beginners!** I personally bought and flew this plane because I was completely new to flying and did not want to Smash and Trash a $400.00 gas plane, thanks to this Park flyer, I'm ready to move to the next level. best of all no permit was required to fly this. I opted to purchase the longer lasting NiMH batteries (2) that can yield up to 40 minutes flight time between the two. A ready-to-fly R/C plane that's easy-to-operate, sturdy enough to "crash without being trashed". The R/C Ready To Fly (RTF) park flyer has glider-like stability suitable for flight in small nearby areas like parks and ball fields. Recommended for Ages 12+. Ready-To-Fly right out of the box. Just add batteries to the transmitter, charge the flight batteries using the included charger, bolt the tail wing to the boom, connect the flap push rods and you're ready to fly! * **The Radio Transmitter*** The transmitter has simple 2-channel proportional joystick controls with trims. The left stick controls the throttle and the right stick controls the tail flaps for turning. It's kind of like driving a car except the faster you go, the higher you climb! The radio transmitter (shown above) also features trim controls for precise adjustments of throttle and flaps. The control range is 1500' to give you plenty of margin Ready-To-Fly right out of the box. Remarkable crash-tolerant construction The ability to "crash without being trashed" makes the park flyer a true "survivor" The Planes single-piece poly molded fuselage and fiberglass tail boom is exceptionally tough. Forget about those hard crashes that usually destroy front-end motors and propellers, because the YellowBee's motor and pusher propeller are rear-mounted. Tough, enamel-coated foam wings attach with rubber bands that pop off in a crash to prevent extensive wing damage. If you're a beginner you will be especially glad to know that I include several spare parts to help you through the ordinary mishaps which are all part of the learning process. Just add batteries and you are ready to fly. With this plane, you don't just get a RTF plane. You get the radio transmitter too! All you need to provide is 8 AA batteries for the transmitter. The park flyer comes complete with RTF airplane with motor, receiver, and throttle speed controller. One flight battery packs and AC charger are also included. |
|
|
Super Sale! CMP Model P40 Warhawk 140 - 73 " ARF Nitro Gas Radio Remote Controlled "Tiger Shark" Airplane RC Plane $499 This is so far our highest quality arf plane kit, well priced and almost-ready-to-fly! The P40 Warhawk has a fiberglass fuselage and cowl painted in vague colors. The rib wings are covered with Solartex and airbrushed to match the color of the whole aircraft. The wood that makes up both the wings and the fuselage are all laser cut. The high precision of fiberglass and fine painting work make this kit an extremely realistic aircraft. It is a perfect combination between scale looks and excellent flying performance. The kit comes with a full color decal sheet, wheels and a fuel tank. This war bird is a must fly! Wingspan 1850mm Length 1570mm Weight 4.88~4.95 kg Wing Loading 81~83 dm/2 Airfoil Naca 0014 Wing Area 60 dm/2 Radio Control 4~5 Ch 5~6 Servos purchase separately 2 Strok Engine 108~120 purchase separately 4 Strok Engine 140 purchase separately *RETRACT NOTE* The retract bays are built into the wing from the factory, so the retracts will drop right in. Wing Span: 73" Weight: 10.75lb Length: 62" Wing Area: 930sq.in Wing Loading: 26.64oz./sq.ft. Engine Required: 4c 140 Radio 4~5 Channel 5~6 Servos The kit box is nice packed, with all the major parts well packed in a light foam wrap and clear plastic bags. Slots in the interior cardboard held all items tightly in place, so it will produce no damage from shipping. Included with the kit are fuel tanks, engine mounts, wheels, hardware, pushrods, clear plastic canopy and nose cone, decal sheet, one-piece fiberglass cowls, and fixed wire landing gear plus other necessary hardware. You will need to purchase some building supplies, engines, spinners, servo extensions, and a radio. Mechanical retracts are an interesting option to consider for this plane kit. The quality of the materials is excellent with a one-piece fiberglass fuselage/fin straight and true. The instruction manual has excellent-quality step-by-step drawings. With an 4-stroke engine installed, this P40 Plane will fly, feel, and sound like the legendary Tiger Shark from World War 2. This fierce P-40 Warhawk comes with quality hardware including the spinner. *Propeller to be purchased separately* Decals are ready applied and protected by clear coat. The model is thus very durable and easy to build. The kit comes with fixed landing gear and optional twist and turn retracts fitting. &n |
|
|
Wild Horse Edge 540T - 50CC Nitro RC Aerobatic Plane ARF $799 New 2009 Edge 540T-50CC Nitro RC Plane. Wingspan 84", VERY light-weight, great covering, high quality building materials and assembly - all makes this model super attractive. Flying weight ~15 to 16lb with DA50 (click here to purchase engine) and stock muffler. Full 3D maneuvers with plenty of surprises. Super-steady harriers and inverted harriers, incredible spins of all kinds - one of the best 50cc nitro planes in the world. |
|
|
Brand New 4 Channel RC EP 37.0? Aerobatic Do-335 Dornier Pfeil Twin Dual Engine EPO Foamy RTF Scale Plane (Green) $199.95 Brand New 4 Channel RC EP 37.0? Aerobatic Do-335 Dornier Pfeil Twin Engine EPO Foamy RTF Scale Plane. This package comes with 3 sets of propellers, spinners, glue and full set of hardware. Its a RTF plane so no need for anything else and with dual motor that power your flying time twice as fun. It is capable of stunt flying and air show tricks, including inside and outside loops, cuban 8, invert fight, roll ,etc suitable for experienced flyers as well as beginners. Features: Super strong gauge foam fuselage and wings.Made of EPO shock resistant material.Excellent flying performance.Easy to assemble.Easy to fly.Ideal for Beginners. Specification:Length : 935mm (37")Wing span : 940mm (37.01")Main Wing Area : 17.8 dm²Flying Weight : 740gMotor :2-370A with GearBoxPropeller : 8 X 6"Battery : 9.6V 1100mAhRadio : FM4-Channel proportional radio w/ V-Type mixed controllerPackage Shipping Weight : 1755gItems included:4 Channel RC EP 37.0? Do-335 Dornier Pfeil RTF Scale PlanePropeller * 3GlueDecalsScrew DriverScrews and hardwareUser Manual |
|
|
Brand New 4 Channel RC EP 37.0? Aerobatic Do-335 Dornier Pfeil Twin Engine EPO Foamy RTF Scale Plane (Black) $249.95 Brand New 4 Channel RC EP 37.0? Aerobatic Do-335 Dornier Pfeil Twin Engine EPO Foamy RTF Scale Plane. This package comes with 3 sets of propellers, spinners, glue and full set of hardware. Its a RTF plane so no need for anything else. It is capable of stunt flying and air show tricks, including inside and outside loops, cuban 8, invert fight, roll ,etc suitable for experienced flyers as well as beginners. Features: Super strong gauge foam fuselage and wings.Made of EPO shock resistant material.Excellent flying performance.Easy to assemble.Easy to fly.Ideal for Beginners. Specification:Length : 935mm (37")Wing span : 940mm (37.01")Main Wing Area : 17.8 dm²Flying Weight : 740gMotor :2-370A with GearBoxPropeller : 8 X 6"Battery : 9.6V 1100mAhRadio : FM4-Channel proportional radio w/ V-Type mixed controllerPackage Shipping Weight : 1755gItems included:4 Channel RC EP 37.0? Do-335 Dornier Pfeil RTF Scale PlanePropeller * 3GlueDecalsScrew DriverScrews and hardwareUser Manual |
|
|
Ultimate 45CC-50CC Giant Scale Radio Remote Controlled RC Bi-Plane $799.95 One of the BEST 50cc RC BiPlane in the Market! At this price, how can you pass up? Specifications: Wing Span : 71 in / 1800 mm Wing Area : 1670 sq in / 109 sq dm Flying Weight : 15.2 lb / 6890 g Fuselage Length : 78 in / 1980 mm Requirements: Engine Required :45CC ¨C 50CC Radio Radio Required : 4channels 6servos Al Morris reviews it Pictures below are for illustration purposes only. Engine/Electronics are NOT included. Engine/Electronics NOT included. Kit requires user assembly. The New 50cc Ultimate BiPlane! Exclusively Sold at Nitroplanes.com |
|
|
Air Force One Radio Remote Controlled 2-Channel RC Plane RTF $149.95 This plane has realistic look. It is form constructed on fuselage and wings. Some portion have plastic joints to enhance the durability. There are two propellers hidden in the engine cabinets on the main wing. So you might guess it is a jet plane when you see it first time, but figure out is only a electric motor powered airplane later. It is clean and easy to assemble. The package comes everything you need except 8xAA batteries for remote controller. Features * Simulating a true style * All molded plastic and foam construction * Precision Control Specification * Operation Distance 100m * Fly Time 3 minute * Rapidity Electrification 30 minute * Length: 70cm * Width: 70cm Package Included * Air Force One Airplane * 9.6V 400mAh Ni-Mh Rechargeable Battery * 2 Channel Transmitter * AC Charger * English Manual |
|
|
DY8926 ICANFLY: Propeller(2pcs) $4 DY8926 ICANFLY: Propeller(2pcs) |
|
|
26*10 Wood Propeller $79.95 26*10 Wood Propeller |
|
|
New 310-Scale 90 - 92.5" Twin Engine Nitro Power Radio Controlled Plane ARF $499 310-Twin .90 Engine Radio Controlled Plane! Now you can also be few of the first to fly this awesomely built twin-engine nitro powered rc plane! Key Features : Our evergreen model airplane Top quality balsa and plywood construction One of the finest ARF kits on the market All wood constructions with fiberglass parts Trimmed and painted cowling by fuel proof paint Hand iron-on color covering Includes fixed landing gear Comes with all hardware and accessories Specs Wing span: 92.5in / 2350mm Wing area: 1318 sq in / 85 sq dm Flying weight: 11lbs / 5000g Fuselage length: 77 in / 1960 mm Requirements Engine Required: 2c 0.61 cu in x2 4c 0.91 cu in x2 Radio Required: 5channels,7servos |
|
|
CMPro Sky 182-50 Nitro RC Plane ARF *Brand New* $299 The new CMPro Sky 50-182 ARF features nicely painted fiberglass components with decals already applied and clear coated. Finished with fine detailing, you could almost believe that you were looking at the real thing. If you are looking for a small but outstanding scale aircraft, the CMPro Sky-182 50 ARF will not disappoint! Wingspan 1650mm Length 1250mm Weight 2950~3100g Wing Loading 81~85 dm/2 Airfoil Naca2412 Wing Area 36.5 dm/2 Radio Control 5 Ch 7 Servos purchase separately 2 Strok Engine 46~50 purchase separately 4 Strok Engine 52~63 purchase separately |
|
|
CMPPro C-160 EP-Powered Twin-Engine RC Scale Plane Almost-Ready-to-Fly $399 TWIN MOTORS POWERED SCALE AIRCRAFT The CMPro EP-C160 features a fiberglass molded fuselage and a built-up wing, ready covered in a classic and attractive color design. The multi wheel landing gear adds a really scale touch to this exciting model. Wingspan 1450mm Length 1178mm Weight 2.5~2.6 kg Wing Loading 113~118 dm/2 Airfoil Torino-26 Wing Area 22 dm/2 Radio Control 4 Ch 4 Servos purchase separately Motors 2213 purchase separately ESC 20A~25A purchase separately The well-known C-160 is presented in a highly visible classic color scheme with good contrasts to make orientation easier during flight. The attractive ready applied decals on the painted fuselage add to the scale look of the model and are protected by a clear-coat for more durable use. The model comes with a 10 wheel, realistic undercarriage giving an extremely steady and straight tracking take off and landing roll. An easily accessed and neat compartment for the battery is featured to help ultra fast installation The fairly close coupled motors make a good choice for your first twin engined scale model. An ideal fun aircraft for scale enthusiasts. |
|
|
U.S. Army P-51D Mustang 50 - 53" Nitro Gas ARF RC Radio Remote Controlled CMPro Plane $299 P51 Mustang 50 - 53" Nitro Gas ARF RC Plane P-51D-Mustang 50 is all laser cut and is a great scale airplane. Featuring pre-covered fuselage and wings with great looking color scheme sure to catch the eye of everyone. The plane comes with fiberglass cowl. Decals are already stuck to the with clear paint on top. Simple assembly of pre-finished parts enable the model to be ready for fly in very short time. Just a few simple jobs installing radio gear, installing engine, etc and you will be flying. With a 4-stroke engine installed, the P-51 Mustang will fly, feel, and sound like a true legendary U.S. Air Force aircraft! *RETRACT NOTE* The retract bays are built into the wing from the factory, so the retracts will drop right in. Wingspan 53" Fuselage Length 46" Recommended Engine Size 2c/40,46 4c/52,63 Flying Weight 6.0 - 6.2 lbs Wing Area 480.6 sq in Airfoil 15% Semi Symmetrical Fuel Tank Spinner The kit box is nice packed, with all the major parts well packed in a light foam wrap and clear plastic bags. All wood rib wing, nicely covered, rivets decals already applied, ailerons hinged and installed. Horizontal, elevators and rudder also all wood, air foiled surfaces, hinged and ready. Fuselage is very detailed with panel lines molded in, glass work is outstanding. US Air Force decal, dashboard decal and many others perfectly applied. Drop tank included and assembled. Slots in the interior cardboard held all items tightly in place, so it will minimize damage from shipping. Included with the kit are fuel tanks, engine mounts, wheels, hardware, pushrods, clear plastic canopy and nose cone, decal sheet, one-piece fiberglass cowls, and fixed wire landing gear plus other necessary hardware. You will need to purchase some building supplies, engines, spinners, servo extensions, and a radio. Mechanical retracts are an interesting option to consider for this plane kit. The quality of the materials is excellent with a one-piece fiberglass fuselage/fin straight and true. The instruction manual has excellent-quality step-by-step drawings. With an 4-stroke engine installed, this P51 Plane will fly, feel, and sound like the legendary Air Force. If you have had a chance to fly the P-51D, you?ll notice how well the design flies for the P-51D. Once in the air, the P-51D Mustang truly shines with its exceptional flight characteristics. The wing loading has been optimized to make it exceptionally nimble and capable of a variety of dif |
|
|
Extra-330L 80-100CC Gas Engine Power Aerobatic RC Airplane $899.95 80cc~100cc GAS ENGINE POWER AEROBATIC AIRCRAFT ALMOST READY-TO-FLY RADIO CONTROLLED The CMPro 100cc Extra-330L features a gorgeous pre finished glass fiber fuselage and painted wings. The whole plane is pre-decorated in a very attractive design which sure to draw attention. If you feel the need to use lots of sky with big impressive maneuvers, you must not miss this giant beauty! Wingspan 2600mm Length 2300mm Weight 13.5~14 kg Wing Loading 108~112 dm/2 Airfoil Naca 0014 Wing Area 125 dm/2 Radio Control 4 Ch 9 Servos purchase separately Gas Engine 80~100 purchase separately The underside is finished in a neat but eye-catching design which helps greatly with orientation. A carbon fiber wing tube is supplied with kit. The built-up wings come pre-painted and clear coated. Large control surfaces that bring superb flying performance and make the kit very maneuverable. All the components are nicely finished including a painted cowl and spats, and a tinted canopy. The design is to give a simple and convenient set up for the engine. 90% factory built. Just join the wings, put the engine and a few more simple tasks to get this beauty in the air. |
|
|
Gas Fokker DR-1 - 45" .90 Size Nitro Gas Engine Radio Remote Controlled RC Tri-Wing-Plane [Yellow/Black Version] $399.95 The Fokker Dr. I Dreidecker (triplane) was a World War I fighter aircraft designed by Reinhold Platz and built by Fokker-Flugzeugwerke. The Dr.I saw widespread service in the spring of 1918. It became renowned as the aircraft in which Manfred von Richthofen gained his last 20 victories, and in which he was killed on 21 April 1918. Specifications: Wing Span : 45 in / 1143mm Wing Area : 850 sq in / 54.8 sq dm Flying Weight : 6.6 lb / 3000 g Fuselage Length : 43.5 in / 1105 mm Requirements: Engine Required :2c 0.75 ; 4c 0.91 Radio Required : 4channels 5 servos |
|
|
Katana 50 - 53" Nitro Gas 3D Aerobatic Radio Remote Controlled RC Sports Plane ARF $319 The CMPro Katana 50 ARF is of balsa wood construction to ensure maximum performance. Very agile and impressively colored it causes heads to turn. The plane performs smooth and accurate flying that beyond your expectations. Wingspan 1350mm Length 1270mm Weight 2.75~2.85 kg Wing Loading 91~95 dm/2 Airfoil Naca 0014 Wing Area 30 dm/2 Radio Control 4 Ch 5 Servos purchase separately 2 Strok Engine 46~50 purchase separately 4 Strok Engine 52~63 purchase separately Construction is built-up balsa except for the fiberglass cowl and spats. Full color decal sheet is included. The bottom color design is too eye-catching that you will never lose this plane from you sight. A plastic cockpit and clear PVC canopy are included. |
|
|
CMP F4U Corsair 120 - 76" Nitro Gas Radio Remote Controlled RC Plane ARF Airplane Warbird $349 The F4U Corsair is a real beauty. Anyone who likes the war birds is bound to love this airplane. The kit includes a fiberglass fuselage, and is painted with a blue and gray scheme.. The wings are sheeted foam, covered with Solortex cloth covering and painted. All control surfaces have beveled leading edges and the control horn mounts are preinstalled. The wing is complete with CA hinges. The leading edge of the wing is pre-shaped. Completely workable three-piece flaps are also built into this kit. This kit can be fitted with either fix landing gear or 90 degree rotating retracts. Note: See pictures below for actual paint scheme used. With an 4-stroke engine installed, this F4U Corsair plane will fly, feel, and sound amazing. Specs: Wingspan 75.5" Fuselage Length 52" Recommended Engine Size 2c/91, 108 4c/120 Flying Weight 11 - 11.5 lbs Wing Area 892 sq in Fuel Tank 350-450 cc Radio 5-6 Ch 6-7 Servos The kit box is nicely packed, with all the major parts well packed in a light foam wrap and clear plastic bags. All balsa wood rib wing, nicely covered, rivets decals already applied, ailerons hinged and installed. Horizontal, elevators and rudder also all wood, air foiled surfaces, hinged and ready. Drop tank included and assembled. Slots in the interior cardboard held all items tightly in place, so it will minimize damage from shipping. Included with the kit are fuel tanks, engine mounts, wheels, hardware, pushrods, clear plastic canopy and nose cone, decal sheet, one-piece fiberglass cowls, and fixed wire landing gear plus other necessary hardware. You will need to purchase some building supplies, engines, spinners, servo extensions, and a radio. This plane is retract-ready so mechanical retracts are an interesting option to consider for this plane kit. The quality of the materials is excellent with a one-piece fiberglass fuselage/fin straight and true. The instruction manual has excellent-quality step-by-step drawings. With an 4-stroke engine installed, this F4U Corsair plane will fly, feel, and sound like the legendary fighter jet from World War 2. Engine/Radio Equipments Sold Separately. Engine/Radio NOT included. As with all of our arf kit, this plane comes with all parts carefully wrapped in thin foam sheet and plastic bags. |
|
|
|
October 5th, 2007 in
RC Airplanes