RC Model Engine Unrun
RC Model Engine Unrun
 |
No items matching your keywords were found.
_________________________________________________________________________________
|
|
Rutan Defiant 74 ARF Twin-Engine Radio Remote Controlled Push-Pull RC Aircraft $499 The Rutan Model 74 Defiant is a ARF Nitro Gas twin-engine aircraft with the engines in a push-pull configuration. Wingspan 65 in 1650mm Fuselage Length : 51 in / 1300mm Flying Weight 7.9 lb / 3600g n/a n/a Wing Area 924 sq in / 60 sq dm Radio Required: 4Channels 7servos (Purchase Separately) Engine Required 2 c 0.40 cu in x2 (Purchase Separately) |
|
|
421 Scale RC Aircraft Twin-Engine 46 - 71" Nitro/Electric Powered Remote Control Airplane ARF $499.95 421 Twin Engine Fuel/Electric-Powered Radio Controlled RC Plane ARF Wing Span: 71in / 1800mm Wing Area: 763 sq.in / 49.5 sq.dm Flying Weight: 11.0 lbs /5000g Fuselage Length: 62.6in / 1590mm Engine Required: 2c :0.40-0.46 x2 Radio Required: 6 channels ; 10-11 servos What the Pro says (More reviews here) The quality and engineering is excellent. It goes together VERY fast, far and away the fastest twin to build I have ever done. Everything fits perfectly, and the level of prefabrication is very high. The instructions are English and decent. It comes with fixed gear, and it's set up for retracts, too. I am waiting on a set of Robart air retracts to complete my plane. Mechanical retracts could be done, with a little engineering on your part.I am using two each of Exceed Monster Power 46 outrunners, Volcano 80A Escs, and Fusion Power 3200 5s lipos. The servos are all T-Pro SG5010 standard servos. I have used a bunch of them before with no issues, they are quite a bargain. Normally, on a plane this size, which will end up at least 10 pounds, I'd use something stronger on the elevators, but this plane is set up with two elevator servos, so standard servos are just fine. I will be using a seperate UBEC on one of the batteries to power the radio. Actually, maybe two of them. On previous large twins like the B25, P82, and Mosquito, I have used 5000mah packs, but long flights of 10 minutes or so have left me landing with over half the battery still left, so this time, I went with 3200, should be plenty. The nacelles are each one large fiberglass piece. This makes access to the interior very easy. If you wanted to, it would be easy enough to cut off the cowl portions to make them seperate. What engines will fit? It is set up for two 40s, I think four strokes should go in without any real problem, too. With my electrics, I made up my own plywood box motor mounts, but nice nylon mounts and good quality fuel tanks and tubing are all included in the kit, if you want to go glow. Did I mention how nice the glasswork and paint are? Along with all the woodwork and covering? Nice quality, and LIGHT. Oh...and you can't tell from the pictures, but it includes split flaps, too. I swapped out a few pieces of hardware along the way...what is included is good quality, but I don't like using EZ connectors on flight controls, so I soldered threaded couplers onto my elevator and rudder pushrods and added clevises instead. The rest of the hardware all got used. There is a nice set of decals(stickers) included. Not sure what of them I will use, I want to make mine a little different from the box top. Anyway...so far...delighted! Many pleasant surprises with this model. More from the Pro NitroModels keeps growing and learning, it really |
|
|
Zlin Z-50 Engine 46~52 - 56" Nitro Gas Radio Remote Controlled RC Airplane ARF $319 The Zlin Z-50 is one of the most famous sports planes used in aerobatics and this ARF NitroModel Z50 is built with all the aerodynamic characteristic of the real one! It is a very special aerobatic airplane made by quality balsa wood protected by clear coating. 90% of the model is pre-finished at the factory - you can enjoy flying this beauty with the least building time. And of course, it flies as good as it looks! Wing Span : 55.9 in / 1420mm Wing Area : 531 sq in / 34 sq dm Flying Weight : 5.5lb / 2480g Fuselage length : 43.3 in / 1100mm Engine Required : 2c : 0.46 4c: 0.52 Radio Required : 4channels 5 servos Decals included but not pre-applied. |
|
|
Giant Scale J3 Piper Cub 120 - 91" Engine Powered Scale Remote Controlled RC Aircraft $599.95 Positive Reviews from Everyone! At this price, with this quality, you won't be disappointed! Guarantee!!! The well-known Piper J-3 Cub 120 Engine powered scale aircraft is one of the most recognized designs in aviation. The CMPro model features all balsa construction except for the fiberglass cowl. This results in a light but strong model. Wingspan 2310mm Length 1500mm Weight 5.3~5.4 kg Wing Loading 69~71 dm/2 Airfoil Naca 4412 Wing Area 76 dm/2 Radio Control 4 Ch 5 Servos purchase separately 2 Strok Engine 90~108 purchase separately 4 Strok Engine 110~120 purchase separately Don't forget to pick up a pilot for this plane! The undercarriage design works really well as an anti-vibration system and greatly lowers the tendency to bounce during landing. Tailplane and rudder are tied with wires to make the system strong. Rims and tyres supplied with kit are custom-made for the CMPro Piper J-3 Cub. Our J-3 Cub is also designed to give super performance with 20cc gas engines. Easy access to put servos and other detailing. (Model pilot shown in photo should be purchased separately). Wing panels are joined together with the alloy tube supplied. Doors at the fuselage can be opened from both sides. The undercarriage design is imitated from the real J-3 Cub which acts as an anti-vibration system. |
|
|
New CMP Edge-540T 2c 40~46 4c 52~63 Engine Powered Aerobatic RC Aircraft ( ARF ) $339 Edge-540T 2c 40~46 4c 52~63 Engine Powered Aerobatic Aircraft Edge-540T 50Size The CMPro Edge-540T 50 ARF comes pre-covered in a dazzling color design that will not fail to draw attention. Construction is built-up balsa throughout except for the cowl and spats. This results in a light but strong model. The kit also includes a fiberglass landing gear and polystyrene spats which are strong and durable. All the components are pre-finished and pre-painted at factory to maximum your fun of flying. The kit provides a large area of control surface movements for superb performance: Full aileron design Elevator surface movement approx. 50% Rudder surface movement approx. 60% These features have made our Edge very manoeuverable and thus anymore wishing to try precision aerobatics must not miss this kit! Wingspan 1400mm Length 1270mm Weight 2.8~2.9 kg Wing Loading 90~93 dm/2 Airfoil Naca 0012 Wing Area 31 dm/2 Radio Control 4 Ch 5 Servos purchase separately 2 Strok Engine 40~46 purchase separately 4 Strok Engine 52~63 purchase separately Construction is neat and simple to provide easy access for engine, servo and etc. Quality control horns for direct and more responsive control. Fiberglass landing gears and polystyrene wheel pants, pre-finished at factory. Glass fiber cowl with gorgeous painting. Fuselage is built up by quality balsawood to minimize weight. Wings and tails come pre-covered with decals ready applied, protected by a clear coat. Removable top hatch to provide plenty of room for assembly. All the components |
|
|
Wild Horse Edge 540T - 50CC Nitro RC Aerobatic Plane ARF $799 New 2009 Edge 540T-50CC Nitro RC Plane. Wingspan 84", VERY light-weight, great covering, high quality building materials and assembly - all makes this model super attractive. Flying weight ~15 to 16lb with DA50 (click here to purchase engine) and stock muffler. Full 3D maneuvers with plenty of surprises. Super-steady harriers and inverted harriers, incredible spins of all kinds - one of the best 50cc nitro planes in the world. |
|
|
Katana 120 V2 - MOST BEAUTIFUL CMP AIRPLANE! ON PROMOTION NOW New Model! CMP Katana S Version 2 ARF 2c 108~160 4c 120~140 ENGINE POWERED Aerobatic RC Aircraft $399.95 2c 108~160 4c 120~140 ENGINE POWERED AEROBATICS AIRCRAFT The Katana 140 ARF Version II has been updated in a stunning color scheme which will not fail to catch attention. All built-up construction with high quality balsawood making a light but tough aerobatic machine. With the new design, the aileron is enlarged for outstanding 3D performance and it can perform just about any man oeuvre in the book! Wingspan 1830mm Length 1690mm Weight 5.2~5.35 kg Wing Loading 81~83 dm/2 Airfoil Naca 0014 Wing Area 64 dm/2 Radio Control 4 Ch 6 Servos purchase separately 2 Strok Engine 108~160 purchase separately 4 Strok Engine 120~140 purchase separately The whole plane is supplied pre-decorated in great looking color design. Decals come ready applied under fine painting. Enlarged aileron contributes to superb 3D manoeuvres and enhances overall control of the plane. The color design at the bottom does not fail to impress as much as the top does and you won?t be able to lose it from your line of sight! The kit provides almost everything to get to a flying standard, including a removable top hatch to ease assembly. HIP (High Impact Polystyrene) wheel pants which are light and durable, nicely painted to match the whole color design. |
|
|
Red CMP Extra 330L 50 - 56" Nitro Gas Engine Powered Radio Remote Controlled Aerobatic RC Airplane ARF $319 The CMPro 50-size Extra-330L (2c 40~46 4c 52~63 ENGINE POWERED AEROBATIC AIRCRAFT) is available in two stunning color schemes.Both come with decals already applied, protected by clear coating. 90% of the model is pre-finished at the factory - you can enjoy flying this beauty with the least building time. And of course, it flies as good as it looks! Wingspan 1430mm Length 1270mm Weight 2.85~2.95 kg Wing Loading 92~95 dm/2 Airfoil Naca 0014 Wing Area 30.8 dm/2 Radio Control 4 Ch 5 Servos purchase separately 2 Strok Engine 40~46 purchase separately 4 Strok Engine 52~63 purchase separately Featuring gorgeous pre-finished parts and complete hardware pack. Comes with optional EP motor mount ? EP or Glow? Make your choice! Plastic engine mount for glow power. Ready covered tailplane and rudder, unique color design to match with the fuselage and wings. Pre painted fiberglass fuselage. Internal construction is nice and neat. Bottom design with attractive color combination. You will never lose this plane from your sight! Light and strong aluminum wing joiner. |
|
|
CMPPro C-160 EP-Powered Twin-Engine RC Scale Plane Almost-Ready-to-Fly $399 TWIN MOTORS POWERED SCALE AIRCRAFT The CMPro EP-C160 features a fiberglass molded fuselage and a built-up wing, ready covered in a classic and attractive color design. The multi wheel landing gear adds a really scale touch to this exciting model. Wingspan 1450mm Length 1178mm Weight 2.5~2.6 kg Wing Loading 113~118 dm/2 Airfoil Torino-26 Wing Area 22 dm/2 Radio Control 4 Ch 4 Servos purchase separately Motors 2213 purchase separately ESC 20A~25A purchase separately The well-known C-160 is presented in a highly visible classic color scheme with good contrasts to make orientation easier during flight. The attractive ready applied decals on the painted fuselage add to the scale look of the model and are protected by a clear-coat for more durable use. The model comes with a 10 wheel, realistic undercarriage giving an extremely steady and straight tracking take off and landing roll. An easily accessed and neat compartment for the battery is featured to help ultra fast installation The fairly close coupled motors make a good choice for your first twin engined scale model. An ideal fun aircraft for scale enthusiasts. |
|
|
New 310-Scale 90 - 92.5" Twin Engine Nitro Power Radio Controlled Plane ARF $499 310-Twin .90 Engine Radio Controlled Plane! Now you can also be few of the first to fly this awesomely built twin-engine nitro powered rc plane! Key Features : Our evergreen model airplane Top quality balsa and plywood construction One of the finest ARF kits on the market All wood constructions with fiberglass parts Trimmed and painted cowling by fuel proof paint Hand iron-on color covering Includes fixed landing gear Comes with all hardware and accessories Specs Wing span: 92.5in / 2350mm Wing area: 1318 sq in / 85 sq dm Flying weight: 11lbs / 5000g Fuselage length: 77 in / 1960 mm Requirements Engine Required: 2c 0.61 cu in x2 4c 0.91 cu in x2 Radio Required: 5channels,7servos |
|
|
HeliPro BlackHawk 500 Replacement Parts: HP05-U002 Engine $55 Engine |
|
|
U.S. Army P-51D Mustang 50 - 53" Nitro Gas ARF RC Radio Remote Controlled CMPro Plane $299 P51 Mustang 50 - 53" Nitro Gas ARF RC Plane P-51D-Mustang 50 is all laser cut and is a great scale airplane. Featuring pre-covered fuselage and wings with great looking color scheme sure to catch the eye of everyone. The plane comes with fiberglass cowl. Decals are already stuck to the with clear paint on top. Simple assembly of pre-finished parts enable the model to be ready for fly in very short time. Just a few simple jobs installing radio gear, installing engine, etc and you will be flying. With a 4-stroke engine installed, the P-51 Mustang will fly, feel, and sound like a true legendary U.S. Air Force aircraft! *RETRACT NOTE* The retract bays are built into the wing from the factory, so the retracts will drop right in. Wingspan 53" Fuselage Length 46" Recommended Engine Size 2c/40,46 4c/52,63 Flying Weight 6.0 - 6.2 lbs Wing Area 480.6 sq in Airfoil 15% Semi Symmetrical Fuel Tank Spinner The kit box is nice packed, with all the major parts well packed in a light foam wrap and clear plastic bags. All wood rib wing, nicely covered, rivets decals already applied, ailerons hinged and installed. Horizontal, elevators and rudder also all wood, air foiled surfaces, hinged and ready. Fuselage is very detailed with panel lines molded in, glass work is outstanding. US Air Force decal, dashboard decal and many others perfectly applied. Drop tank included and assembled. Slots in the interior cardboard held all items tightly in place, so it will minimize damage from shipping. Included with the kit are fuel tanks, engine mounts, wheels, hardware, pushrods, clear plastic canopy and nose cone, decal sheet, one-piece fiberglass cowls, and fixed wire landing gear plus other necessary hardware. You will need to purchase some building supplies, engines, spinners, servo extensions, and a radio. Mechanical retracts are an interesting option to consider for this plane kit. The quality of the materials is excellent with a one-piece fiberglass fuselage/fin straight and true. The instruction manual has excellent-quality step-by-step drawings. With an 4-stroke engine installed, this P51 Plane will fly, feel, and sound like the legendary Air Force. If you have had a chance to fly the P-51D, you?ll notice how well the design flies for the P-51D. Once in the air, the P-51D Mustang truly shines with its exceptional flight characteristics. The wing loading has been optimized to make it exceptionally nimble and capable of a variety of dif |
|
|
Super Sale! CMP Model P40 Warhawk 140 - 73 " ARF Nitro Gas Radio Remote Controlled "Tiger Shark" Airplane RC Plane $499 This is so far our highest quality arf plane kit, well priced and almost-ready-to-fly! The P40 Warhawk has a fiberglass fuselage and cowl painted in vague colors. The rib wings are covered with Solartex and airbrushed to match the color of the whole aircraft. The wood that makes up both the wings and the fuselage are all laser cut. The high precision of fiberglass and fine painting work make this kit an extremely realistic aircraft. It is a perfect combination between scale looks and excellent flying performance. The kit comes with a full color decal sheet, wheels and a fuel tank. This war bird is a must fly! Wingspan 1850mm Length 1570mm Weight 4.88~4.95 kg Wing Loading 81~83 dm/2 Airfoil Naca 0014 Wing Area 60 dm/2 Radio Control 4~5 Ch 5~6 Servos purchase separately 2 Strok Engine 108~120 purchase separately 4 Strok Engine 140 purchase separately *RETRACT NOTE* The retract bays are built into the wing from the factory, so the retracts will drop right in. Wing Span: 73" Weight: 10.75lb Length: 62" Wing Area: 930sq.in Wing Loading: 26.64oz./sq.ft. Engine Required: 4c 140 Radio 4~5 Channel 5~6 Servos The kit box is nice packed, with all the major parts well packed in a light foam wrap and clear plastic bags. Slots in the interior cardboard held all items tightly in place, so it will produce no damage from shipping. Included with the kit are fuel tanks, engine mounts, wheels, hardware, pushrods, clear plastic canopy and nose cone, decal sheet, one-piece fiberglass cowls, and fixed wire landing gear plus other necessary hardware. You will need to purchase some building supplies, engines, spinners, servo extensions, and a radio. Mechanical retracts are an interesting option to consider for this plane kit. The quality of the materials is excellent with a one-piece fiberglass fuselage/fin straight and true. The instruction manual has excellent-quality step-by-step drawings. With an 4-stroke engine installed, this P40 Plane will fly, feel, and sound like the legendary Tiger Shark from World War 2. This fierce P-40 Warhawk comes with quality hardware including the spinner. *Propeller to be purchased separately* Decals are ready applied and protected by clear coat. The model is thus very durable and easy to build. The kit comes with fixed landing gear and optional twist and turn retracts fitting. &n |
|
|
CMP Extra 300s 90 - 65" Acrobatic Radio Remote Controlled Nitro Gas RC Sports Plane ARF $325 The fabulous Extra-330s 90 ARF is pre decorated with an eye catching color scheme. All built-up construction with quality balsa wood which results in a light but strong model. Nicely painted fiberglass cowl and spats. Including with the kit, there are a complete hardware pack and full color decals. You will enjoy flying this model with great delights. Wingspan 65 inch Length 56 inch Weight 3.8~3.9 kg Wing Loading 76~78 dm/2 Airfoil Naca 0014 Wing Area 50 dm/2 Radio Control 4 Ch 5 Servos purchase separately 2 Strok Engine 90 purchase separately 4 Strok Engine 91~120 purchase separately |
|
|
CMP Blue Extra 330L 50 - 56" Nitro Gas Radio Remote Control Aerobatic RC Aircraft ARF $329.95 The CMPro 50-size Extra-330L (2c 40~46 4c 52~63 ENGINE POWERED AEROBATIC AIRCRAFT) is available in two stunning color schemes.Both come with decals already applied, protected by clear coating. 90% of the model is pre-finished at the factory - you can enjoy flying this beauty with the least building time. And of course, it flies as good as it looks! Wingspan 1430mm Length 1270mm Weight 2.85~2.95 kg Wing Loading 92~95 dm/2 Airfoil Naca 0014 Wing Area 30.8 dm/2 Radio Control 4 Ch 5 Servos purchase separately 2 Strok Engine 40~46 purchase separately 4 Strok Engine 52~63 purchase separately Featuring gorgeous pre-finished parts and complete hardware pack. Comes with optional EP motor mount ? EP or Glow? Make your choice! Plastic engine mount for glow power. Ready covered tailplane and rudder, unique color design to match with the fuselage and wings. Pre painted fiberglass fuselage. Internal construction is nice and neat. Bottom design with attractive color combination. You will never lose this plane from your sight! Light and strong aluminum wing joiner. |
|
|
Mitsubishi A6M5 50 - 54" Nitro Gas Radio Remote Controlled RC Japan Warbird Plane ARF $339 The 50 sized Zero Fighter is the youngest brother from the CMPro Japanese Fighter Series. Featuring a fiberglass moulded fuselage and painted rib wings. A great choice for those war plane enthusiasts. Wingspan 1360mm 53.5" Length 1130mm 44.5" Weight 2.8~2.9 kg 6.17 lb Wing Loading 84~87 dm/2 27.63 oz/sqft Airfoil Naca 2415 Wing Area 33.2 dm/2 514.6 sq in Radio Control 4~5 Ch 5~6 Servos purchase separately 2 Strok Engine 46 purchase separately 4 Strok Engine 50~63 purchase separately Wing Span: 53.5" Weight: 6.171lb Length: 44.5" Wing Loading: 27.63 oz./sq.ft. Wing Area: 514.6sq.in Engine Required: 2c 46, 4c 50~63 Radio Required: 4~5 Channel 5~6 Servos Wing is designed to allow optional retracts fitting A quality hardware pack and full color decals are included. The wing panels and tails are also matt spray painted to increase scale features. The high precision fiberglass fuselage is painted in camouflage finish, making an extremely scale and attractive model. ARF Kit Only. Additional Radio Equipments are required to complete. |
|
|
S40A ASP 2-stroke Engine for Nitro RC Planes $199 P - S40A V2 R/C Engine Displacement: 6.46cc Bore: 20.66mm Stroke: 19.28mm RPM range: 2,000-17,500(r.p.m) Output: 1.14/16,500(kw/r.p.m) Weight: 412g Suitable Prop:9x8-10x6 |
|
|
CMP Zero Fighter 50cc - 80" ARF Nitro Gas Radio Remote Controlled RC Airplane New! $799.95 The Mitsubshi A6M5 52 with wingspan of 2100mm is the biggest brother from the CMPro Japanese Fighter Series. This model, well designed for 40~50cc gas engines, features a fiberglass molded fuselage and painted wing panels. The attention to detail results in an extremely realistic model that flies as look as it looks. Wingspan 2100mm Length 1700mm Weight 6.2~6.5 kg Wing Loading 77~81 dm/2 Airfoil Naca 2415 Wing Area 80 dm/2 Radio Control 5~6 Ch 8~9 Servos purchase separately 2 Strok Engine 40~50 purchase separately The whole aircraft is painted in a matt finish which greatly enhances its scale features. A fixed undercarriage is included while optional retracts fitting is also available. Decals come ready applied and clear coated ? that doesn?t only make the kit more durable but shortens building time as well. A carbon fiber wing tube is included with kit. |
|
|
Rutan 74 Deflant Yellow ARF Twin Engine Nitro Gas Radio Remote Controlled Airplane $499 The Rutan Model 74 Defiant is a ARF Nitro Gas twin-engine aircraft with the engines in a push-pull configuration. An aircraft constructed with a push-pull configuration has a mixture of forward-mounted (tractor) propellers and backward-mounted (pusher) propellers. The advantage that an push-pull configuration provides is the ability to mount two propellers on the aircraft's centreline, thereby avoiding the increased drag that comes with twin wing-mounted engines. It is also easier to fly if one of the two engines fails, as the thrust provided by the remaining engine is symmetrical, unlike a conventional twin-engine aircraft, which will yaw in the direction of the failed engine, and becomes uncontrollable below a certain airspeed, known as Vmc, which varies based on the type of aircraft Wingspan 65 in 1650mm Fuselage Length : 51 in / 1300mm Flying Weight 7.9 lb / 3600g n/a n/a Wing Area 924 sq in / 60 sq dm Radio Required: 4Channels 7servos (Purchase Separately) Engine Required 2 c 0.40 cu in x2 (Purchase Separately) |
|
|
New NitroModels CMP F4U Corsair 50 - 58" Nitro Gas Radio Remote Controlled Almost-Ready to Fly RC Airplane Warbird Plane $329 As all NitroModels CMP this F4U Corsair 50 ARF NITRO Gas Plane kit comes with all parts nicely wrapped in thin foam and plastic bags. The kit box is truly nice packed, with all the major parts well packed in a light foam wrap and clear plastic bags. All balsa wood rib wing, nicely covered, rivets decals already applied, ailerons hinged and installed. Horizontal, elevators and rudder also all wood, air foiled surfaces, hinged and ready. Drop tank included and assembled. Slots in the interior cardboard held all items tightly in place, so it will minimize damage from shipping. Included with the kit are fuel tanks, engine mounts, wheels, hardware, pushrods, clear plastic canopy and nose cone, decal sheet, one-piece fiberglass cowls, and fixed wire landing gear plus other necessary hardware. You will need to purchase some building supplies, engines, spinners, servo extensions, and a radio. This plane is retract-ready so mechanical retracts are an interesting option to consider for this plane kit. The quality of the materials is excellent with a one-piece fiberglass fuselage/fin straight and true. The instruction manual has excellent-quality step-by-step drawings. With an 4-stroke engine installed, this F4U Corsair plane will fly, feel, and sound like the legendary fighter jet from World War 2. The F4U Corsair 50 ARF features a fiberglass moulded fuselage and balsa ribbed wings. The whole model is matt spray paint finished with decals already applied. Wing panels are made of quality balsa wood to result a light model. This kit will not fail to impress in the air or on the ground. The F4U Corsair features a fiberglass fuselage and painted wing. The high precision fiberglass construction and the whole ?matt? look make this kit an extremely realistic model. The kit also comes with a professionally painted fiberglass cowl and a fixed undercarriage, with optional rotating retracts fitting. The CMPro Corsair is an ideal choice for those who are looking for a scale warbird with outstanding flying performance. Wingspan 1480mm Length 1100mm Weight 27.5~28.5 kg Wing Loading 63~69 dm/2 Airfoil Naca 2415 Wing Area 41 dm/2 Radio Control 4~5 Ch 5~6 Servos purchase separately 2 Strok Engine 40~50 purchase separately 4 Strok Engine 52~63 purchase separately *RETRACT NOTE* The retract bays are built into the  |
|
|
|
ASP- ft160 twin
June 1st, 2005 in
RC Airplanes