RC Metal Metallic Body

RC Metal Metallic Body

El Nino Resumes Drilling for High Grade Copper in Drc

The rainy season is drawing to a close in the Democratic Republic of Congo (DRC), and that means its time to get the drills turning again on El Nino Ventures' (TSX.V:ELN) 350 square kilometer concession.

According to Jean Luc Roy, CEO of El Nino:, "Based upon the interpretation of our recently completed airborne geophysical survey, we believe we may be on the edge of a mineralized system which extends for over 2.8 kms in strike length. We will drill test the extent of this anomaly starting in April. We have also identified four other geophysical anomalies on our other permits which will be tested in the forthcoming drill program."

The DRC Copperbelt hosts multiple world class deposits and the exploration potential is considered one of the best in the world.

For example, one June 12, 2007 Anvil Mining Limited (TSX:ABM) based in Montréal Canada announced intersections of 10.9% copper over 21 m, 8.9% copper over 36 m, and 8.6% copper over 31 m.

The Katanga province of the DRC has more than 10% of the world's copper and many of the world's best deposits. All of Anvil's copper projects and operations are based on resources with average grades of more than 4% copper.

As a result of the recent work on the Kinsevere project, Anvil has established the following Proven and Probable Mineral Reserve estimate for the combined Stage I and II pits as at April 30, 2007.

Proven and Probable Mineral Reserve mined in Stage I is estimated at 3,726,000 tonnes, of which 917,000 tonnes will be processed through the Stage I plant (Heavy Media Separation ("HMS") and Electric-Arc Furnace ("EAF")), with the remaining ore being stockpiled for later processing through the Stage II plant (SXEW).

The Kinsevere Mineral Resource estimates as at December 31, 2006, which appeared in Anvil's April 23, 2007 news release, are as shown below:

Tiger resource is an Australian-based mining company, recently announced an intersection of 122 m grading 7% copper.

These companies both trade at substantially higher levels than does El Niño. In fact Anvil Mining recently announced a $201 million bought deal financing.

The DRC Copperbelt hosts multiple world class deposits and the exploration potential is considered one of the best in the world. Major mining companies such as Phelps Dodge and First Quantum Minerals are now in construction on world class ore bodies. Several junior companies are now actively exploring for copper and other minerals in the DRC..

Under the terms of the Agreement El Niño purchased a 70 percent interest in the Joint Venture with an option to acquire up to 90 percent of the project by coming to an agreement with our partners, over time. An initial cash payment of $250,000 USD will be made when all regulatory approvals have been received and upon titles of the properties being transferred to the new SPRL Congolese Company that is now being formed.

Additional cash payments totaling $300,000 USD will be made in three annual installments. 300,000 shares of El Niño will initially be issued to GCP Group upon regulatory approval and 400,000 additional shares will be issued over a three year period to the GCP Group. El Niño will fund all exploration work but will retain the services of the CGP Group in an agreement to be negotiated at a later date to support administrative and logistical aspects of the project.

El Nino recently appointed Allan Lines as Exploration Manager for the company's DRC operations.

Mr. Lines has worked in the mineral exploration industry for the past 13 years, exploring for VMS base metals in eastern Canada, greenstone gold exploration in West Africa and, for the past several years has been managing exploration programs in the DRC Copperbelt for a TSX/ASX listed copper producer and a NYSE listed major company.

Mr. Lines started working in the Democratic Republic of Congo in early 2005. Since then he designed and supervised geochemical sampling programs, advised on project acquisitions, authored baseline environmental studies and planned and managed RC and diamond drilling programs totaling well over 50,000 meters.

In addition to mineral exploration, Mr. Lines has several years experience in the field of mine permitting, including managing Environmental Impact Assessment Studies and public consultation programs.

Mr. Lines commented: "I am excited to be joining El Nino Ventures Inc. at this time -- the vast experience of the management team in doing business in the DRC and the company's project portfolio puts the company in a great position. I am eager to begin the 2008 drill campaign and maximize the value of the exploration properties."

Mr. Jean Luc Roy, President of El Nino Ventures states:" I am very pleased to have Mr. Allan Lines join our team in the DRC. We are very fortunate to have on board a geologist with such valuable DRC Copperbelt experience. With Allan's technical background and management's very substantial experience in the DRC the company is in a prime position to maximize the value of its highly prospective exploration permits in the DRC. Allan will work closely with his local technical team and he anticipates the start of our 2008 drill program for mid-April. "

About the Author

Resourcex Investor is an internationally distributed newsletter about emerging junior resource companies. Sign up for a free 1-month trial to our newsletter and get instant access to news and investing tips that have helped many of our readers make more money. http://www.resourcex.com

_________________________________________________________________________________

Exceed RC BlueRay 450PE Replacement Parts: CNC Metal battery mount $8 Exceed RC BlueRay 450PE Replacement Parts: CNC Metal battery mount

Exceed RC BlueRay 450PE Replacement Parts: CNC Metal canula bolster $7 Exceed RC BlueRay 450PE Replacement Parts: CNC Metal canula bolster

Exceed RC BlueRay 450PE Replacement Parts: CNC Metal Rotor Housing $13 Exceed RC BlueRay 450PE Replacement Parts: CNC Metal Rotor Housing

Exceed RC BlueRay 450PE Replacement Parts: CNC Metal Swashplate $13 Exceed RC BlueRay 450PE Replacement Parts: CNC Metal Swashplate

Exceed RC BlueRay 450PE Replacement Parts: CNC Metal Tail Unit $18 Exceed RC BlueRay 450PE Replacement Parts: CNC Metal Tail Unit

Exceed RC BlueRay 450PE Replacement Parts: CNC Metal Washout Base $12 Exceed RC BlueRay 450PE Replacement Parts: CNC Metal Washout Base

Brand New 4 Channel RC RTF EP 35? Aerobatic Barracuda Scale Remote Control Plane (Brown) $199.95 The Fairey Barracuda became operational with the Royal Navy during the second World War, operating as a torpedo and dive bomber from aircraft carriers. It was the first all metal monoplane British torpedo bomber. RTF (Ready To Fly) Version Specification: Wingspan: 890mm (35.04") Length: 750mm (29.52") Flying Weight: 480gDrive System: 370 carbon brush motor Speed Controller: 25A speed controller Servo: 3x10g Battery: 8.4 V 650mah Ni-MH Control system: 4 CH Multifunctional Radio Transmitter and Micro Receiver Radio Control Range: > 1000 feet (300m) Feature: 4 Channel Full Function Radio Controlled (Aileron, Elevator, Rudder, Throttle) Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible The wing and body used in this jet are specially designed to allow high G maneuvers, yet the wing loading is still very low Powerful brush motor makes it possible to fly this plane at high speed in the situations with much wind Excellent stability of nosing up and down Rudder helps steer plane on ground on its scale landing gear for easy take off Ready to Fly in Just Minutes! Super tough, lightweight airframe! Perfect appearance and emulation (Scale appearance, great attention has been given to details) Shock Resistant Reinforced Fuselage and Strong Wings Can Take Off From Ground or Hand Launched Ground Take-Off can be performed easily Excellent Flight Performance Super easy and super stable electric powered scale R/C park flyer for beginner or middle-level users Stable inverted flight Fuselage with pre-installed Electronics, Motor, Servos, and Speed Controller Super stable for beginner, Super low speed for safety, Super low altitude for fun Fabricated by accurate molds with high fidelity of real airplane Excellent stability and aerobatic capability Detailed Body Structure High roll rate Digital Proportional Motor Speed Control Slow Speed Flying Capable, Good for Beginner Suitable for both beginners and experienced pilots Approximately 10-15 minutes flight time on each charge Complete Kit, Ready to Fly, Easy to Assemble (Everything is included and 90% assembled -- only required 8 AA batteries for the transmitter to start flying) Package Include: Airplane (90% assembled, all electronic components are installed), Ready to fly in minutes 4 Channel Multifunctional Radio Transmitter Wall Battery Charger High Quality Rechargeable 8.4V 650mah Battery English Manual

Brand New 4 Channel RC RTF EP 35? Aerobatic Barracuda Scale Remote Control Plane (Grey) $89.95 The Fairey Barracuda became operational with the Royal Navy during the second World War, operating as a torpedo and dive bomber from aircraft carriers. It was the first all metal monoplane British torpedo bomber. RTF (Ready To Fly) Version Specification: Wingspan: 890mm (35.04") Length: 750mm (29.52") Flying Weight: 480gDrive System: 370 carbon brush motor Speed Controller: 25A speed controller Servo: 3x10g Battery: 8.4 V 650mah Ni-MH Control system: 4 CH Multifunctional Radio Transmitter and Micro Receiver Radio Control Range: > 1000 feet (300m) Feature: 4 Channel Full Function Radio Controlled (Aileron, Elevator, Rudder, Throttle) Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible The wing and body used in this jet are specially designed to allow high G maneuvers, yet the wing loading is still very low Powerful brush motor makes it possible to fly this plane at high speed in the situations with much wind Excellent stability of nosing up and down Rudder helps steer plane on ground on its scale landing gear for easy take off Ready to Fly in Just Minutes! Super tough, lightweight airframe! Perfect appearance and emulation (Scale appearance, great attention has been given to details) Shock Resistant Reinforced Fuselage and Strong Wings Can Take Off From Ground or Hand Launched Ground Take-Off can be performed easily Excellent Flight Performance Super easy and super stable electric powered scale R/C park flyer for beginner or middle-level users Stable inverted flight Fuselage with pre-installed Electronics, Motor, Servos, and Speed Controller Super stable for beginner, Super low speed for safety, Super low altitude for fun Fabricated by accurate molds with high fidelity of real airplane Excellent stability and aerobatic capability Detailed Body Structure High roll rate Digital Proportional Motor Speed Control Slow Speed Flying Capable, Good for Beginner Suitable for both beginners and experienced pilots Approximately 10-15 minutes flight time on each charge Complete Kit, Ready to Fly, Easy to Assemble (Everything is included and 90% assembled -- only required 8 AA batteries for the transmitter to start flying) Package Include: Airplane (90% assembled, all electronic components are installed), Ready to fly in minutes 4 Channel Multifunctional Radio Transmitter Wall Battery Charger High Quality Rechargeable 8.4V 650mah Battery English Manual

Exceed RC BlueRay 450PE Replacement Parts: Carbin Fiber Tail Rod With Metal Brace $7 Exceed RC BlueRay 450PE Replacement Parts: Carbin Fiber Tail Rod With Metal Brace

Exceed RC BlueRay 450PE Replacement Parts: CNC Metal Complete Rotor Head (3 legs) $79 Exceed RC BlueRay 450PE Replacement Parts: CNC Metal Complete Rotor Head (3 legs)

Exceed RC BlueRay 450PE Replacement Parts: CNC Metal Flybar Control Set $13 Exceed RC BlueRay 450PE Replacement Parts: CNC Metal Flybar Control Set

Exceed RC BlueRay 450PE Replacement Parts: CNC Metal Flybar Seesaw Holder $12 Exceed RC BlueRay 450PE Replacement Parts: CNC Metal Flybar Seesaw Holder

Exceed RC BlueRay 450PE Replacement Parts: CNC Metal Main Rotor Holder $20 Exceed RC BlueRay 450PE Replacement Parts: CNC Metal Main Rotor Holder

Exceed RC BlueRay 450PE Replacement Parts: CNC Metal Main Shaft Bearing Mount Set $20 Exceed RC BlueRay 450PE Replacement Parts: CNC Metal Main Shaft Bearing Mount Set

Exceed RC BlueRay 450PE Replacement Parts: CNC Metal See-saw Arm Set $12 Exceed RC BlueRay 450PE Replacement Parts: CNC Metal See-saw Arm Set

Exceed RC BlueRay 450PE Replacement Parts: CNC Metal Swash Plate Assembly Path $6 Exceed RC BlueRay 450PE Replacement Parts: CNC Metal Swash Plate Assembly Path

Exceed RC BlueRay 450PE Replacement Parts: CNC Metal Tail Fix Set $14 Exceed RC BlueRay 450PE Replacement Parts: CNC Metal Tail Fix Set

Exceed RC BlueRay 450PE Replacement Parts: CNC Metal Tail Gear Bearing set $15 Exceed RC BlueRay 450PE Replacement Parts: CNC Metal Tail Gear Bearing set

Exceed RC BlueRay 450PE Replacement Parts: CNC Metal Tail Holder Set $14 Exceed RC BlueRay 450PE Replacement Parts: CNC Metal Tail Holder Set

Exceed RC BlueRay 450PE Replacement Parts: CNC Metal Tail knighthead set $6 Exceed RC BlueRay 450PE Replacement Parts: CNC Metal Tail knighthead set

RC Truck panel forming part 1