RC Large Snap Swivels
RC Large Snap Swivels
 |
No items matching your keywords were found.
_________________________________________________________________________________
|
|
Exceed RC 3-Channel J3 Piper Cub EP Electric RC Airplane 100% Ready-to-Fly *New* THE BEST TRAINER!!! $119 Exceed RC's SD J3 Grasshopper Scale RC Plane 1:10 SCALE READY TO FLY Electric Powered RC Airplane, Brand New! Ready to fly RC with amazing performance. Complete with 3 channel C&F RC, 9 gram micro servos, rechargeable battery and charger installed. Even the pushrods and control surface horns are fitted! Factory built. Just takes minutes to assemble. You can even remove the RC and use it in other models! What a great investment in fun!! Piper Cub J3 Beginners Guide Part 1 ' Piper Cub J3 Beginners Guide Part 2 The J3 CUB 3 Channel has successfully trained thousands of newbie radio controlled pilots worldwide. You'll be flying within minutes of receiving this fully built airplane enjoying over 12 minute flight times on a single charge thanks to our new improved NiMH battery and ball bearing gear drive system. Equipped with a powerful speed electric motor, which starts with a push of a button, the J3 CUB is capable of take-offs from the ground with its huge powerful motor and wide wingspan. Battery Operated 380 Motor Plane Ready to Fly, assembly can be done in 10 mins Digital Proportional Speed Controller Slow Speed Flying Capable, Good for Beginner Shock Resistant Reinforced Foam Fuselage and Strong Wings 2 X 18g micro servo for Rudder and Elevator Control R/C Set included, Complete 3 Channel Control including Complete Left/Right Control by Rudder Complete Elevator Control Digital Proportional Motor Speed Control Knob Superb Quality--Simply The Best RTF Plane you can find Up to 300Maltitude, over 15 mins flight time Powered by 8.4V NIMH re-chargeable battery (110v adaptor included) Can Fly as a Glider (without Motor Power) Brand NEWAll tools required are included for you Assembly take less than 20mins Best Looking Plane on the market Data Sheet: Ready to fly (RTF) with battery charger and RC! Includes REAL RC equipment which can be used in other models! Wing span - 37.5 inches (95.5cm) Length - 28.8 inches (73cm) Wing area - 13.7dm2 Assembly is a snap! With no tools required, you can be up and flying within minutes of opening the box! Highlighted features for this airplane Transmitter 3 Channel Radio Controller features: Left/Right Control Elevator Control Digital Progressive Motor Speed Control Kno |
|
|
Exceed RC Mirage 2000 64MM EDF Jet * Receiver-Ready Version * $299.95 This is a Receiver-Ready Mirage 2000 64MM EDF Jet. User is required to have their own TX+RX. Wingspan: 575mm Length: 830mm Flying Weight: 520g Three 9 gram servos Brushless Powered: Powerful 14L inner runner brushless motor and 25A ESC Battery: 3 Cell Li-Po Battery,1300 mAh,11.1V Additional Requirements: Radio System: 4Ch Tx and 6 Ch Rx, Exceed RC has now shrunk this fighter jet so you can fly at your own hands. The Exceed Rc Mirage 2000 Lighting Red Series is made with high performance Ducted Fan, Receiver-Ready right out of the box with minimum assembly required. Exceed RC Mirage 2000 is powered by the new developed 14L inner runner brushless motor with 25A ESC electric speed controller. The Exceed RC Mirage 2000 Lighting Red Series RTF Scale Jet is an all-molded foam airplane that comes completely painted in an attractive matte finish with waterslide decals applied. The 64mm fan with brushless inner runner motor is pre-installed, as is the 25A brushless speed control. The jet has 3 preinstalled servos. Landing gear is fixed but can be easily removed for hand launching. Battery changes are quick, just remove the hatch and place it in. The Exceed RC Mirage 2000 jet is large enough for good visibility in flight, but is easily transported. The thrush from the 64mm fan with the included 3 cell Li-po Battery 1300 mAh 11.1V will quickly accelerate the Exceed RC Mirage 2000 Jet into the air. The climb out is steep and the speed impressive. The full scale Mirage 2000 had the glide angel of a brick; our version display much more pilot friendly manners. Due to its light weight, the Mirage 2000 flying character, making landings a thing of beauty. Flight times are about 10 on a charge. |
|
|
Extra 330L-EP Extreme 3D RC Acrobatic Plane ARF $399.95 Extra 330L EP The Most Extreme 3D Acrobatic RC Plane! Great ready for some extreme maneuvers! The Flying Dream Extra-330L EP comes factory painted in a dazzling fancy color design that sure to draw attention. You don't even need to spend any time to decorate and it already looks like a beauty. The removable top hatch also helps ultra fast installation of the servos and other remaining electronics. The Extra-EP 330L is also a great flyer because of her large control surfaces. Full Aileron design Approx. 50% elevator surface Approx. 60% rudder surface A great combination of good looks and outstanding flying performance. Wingspan 1350mm Length 1150mm Weight 2300-2600g Wing Loading 76~78 dm/2 Airfoil Naca~0014 Wing Area 33 dm/2 Radio Control 4 Ch 4 Servos purchase separately Motors A3520/6~A4120/7 purchase separately ESC 20A~25A purchase separately |
|
|
300DF Outrunner RC Brushless Motor for Electric Radio Remote Control Planes (Recommended for Slow Stick RC Flyer) 2250 RPM $75 The 300DF is a light motor, designed to fly park flyers. Use the 300DF with a 3:1 or gearbox and large prop 8x4, or a speed demon on a 5x3 inch or smaller prop. 2 cell Lipo or 3 cell Lipo can be used with all this motor, but best performance can be achieved by using 3 cells+4.5:1 gear ratio with 12X6, or 11X7 or 11X4.7 props. The data for other props and gears: For 3.4:1 gearing use 11x7 HD, 11x4.7 SF For 4.5:1 gearing use 12x6, 11X4.7, 11X7 SF 300DF pusher props have proven to be spectacular. It has been flown with Wing Warrior Zaggis, Wattage HyperWing and Edge RC delta wing planes. Using a small prop direct drive and wings around 16 Oz weight, this is the best you can get at this price. With a 5x4 prop it draws about 12 amps. It is equally good with large props in a gearbox. So decide whether you want speed - 50+ MPH or slow fly with large props and a lot of torque and use this motor for both. Specifications Max Current: 10 Amps. KV: 2250 Weight: 29.7 grams Shaft Diameter: 2.3mm Mount holes: standard 16.5 & 19.5 We have done extensive testing on this motor and are really excited about putting it into action in some of our IFO's, Tiger Moths (can you say 3D Tiger Moth), PT-17, and any plane 12 oz's or less should go 3D ! The motor has been tested and works well with two and three LiPo cells in series. I like them on three LiPos ! A two cell runs between 6 and 8.4 volts. A three cell runs between 9 and 12.6 volts, depending on the state of charge. See the Tech Chart to figure out what type of performance you'll get with these motors. |
|
|
3-Channel Eagle Co-Axial RC Helicopter w/ LED Rotor Blades. Great for Beginner Pilots $99.95 Newest 3-Channel Eagle Co-Axial RC Helicopter w/ LED Lights & Balance Bar Spinning Lights The is the upgrade Version of the 9083 radio control helicopter, the key improvement is the inclusion of a co-axial rotor (double rotor) this style of rotor eliminates rotor torque making it very steady in flight so its a bit more more forgiving and an extra movement. The 3 Channel Eagle is almost 2 feet long, has the easy to fly controls found in the new generation of RC helicopters and for maximum crash resistance. It is controlled via a three channel transmitter giving 4-way directional control (forward, ascend, left & right) and has adjustable trim via the on board potentiometer. The radio controlled helicopter includes all accessories needed such as fast charger and 9.6 volt battery (transmitter requires 8 x AA batteries - not supplied) The minimal amount of practice is needed to fly this RC helicopter even if your a beginner. Suitable for large indoor areas and outdoor flight in zero wind conditions. Simply remove from the box install charged batteries and your ready to go! The high capacity NI-MH battery will give 20 minutes (approx) of flight time. Specification of the 3 Channel Eagle RC Helicopter ? Fully assembled ? Aluminum landing gear ? Co-axial rotor ? High power 180*2 motor ? 3 Channel controls ? Length: 22.8 inches ? Height: 8.6 inches ? Charge time: 3 hours (approx) ? Flight duration: 20 minutes (approx) ? Range of transmitter: 100 meters ? For large indoor areas and outdoor use (in zero wind conditions) ? This is not a toy: suitable for ages 14 and over Accessories included with this Item ? 9.6v rechargeable battery ? US mains charger (3 hour) ? 3 channel transmitter (requires 8 x AA batteries - not supplied) ? Instruction manual ? Eagle Helicopter ? Screwdriver ? 3 pieces battery for LED lights |
|
|
Walkera 4G3 Micro Metal 3D Aerobatic Brushless CNC RC Helicopter w/ 2801 2.4GHz RC Transmitter $799.95 Walkera 4G3 V2 2.4Ghz Metal Upgrade with WK-2801 8CH Transmitter Edition Helicopter WK-2801 is completely compatibile with 4CH, 6CH, 7CH (Channel) 2.4GHz Products of walkera series. That means you can use WK-2801 for all walkera 2.4GHz Helicopters. Specification Main Rotor Dia.: 302mm Tail Rotor Dia.: 58mm Overall Length: 273mm All-up Weight: 68.4g (Battery included) Main Motor: 1225FE33 Tail Motor: 0716R Battery: 3.7V 400mAh Li-Po Transmitter: WK-2801 Receiver: RX-2605 Servo: wk-02-1 / weight 3.18g / speed 0.12sec/60°(3.0~4.5V) / torque 0.12kgf/cm / dimension 19.2*8.3*19.7mm Gyro: Built-in Features: Ultra mini indoor 3D mode broke the concept of space limitation. Super mini but super precision. Small size helicopter but with full functions of big one. The latest single-cell LiPo technology is CREATIVELY used in this size helicopter in the world. It features friendly environment and energy-saving concept. Equipped with high performance motor, the flight time will be up to 7 to 8 minutes at 3.7V 400mAh LiPo battery pack, depending on your flight mode. WK-2801 Specification: Encoder: 8 channel micro computer system Frequency: 2.4G spread spectrum Output Power: ≤10Mw Current Drain: ≤120mA Power: 1.2VX8 NiCard (9.6V600mAh) or 1.5VX8 AA dry batteries WK-2801 Features: The WK-2801 adopts 2.4Gig spectrum technology and features automatic code pairing and ID assignment. LCD display of the WK-2801 is simple to understand and easy to set. The transmitter case is ergonomically designed and the large LCD display has white backlight with easy-to-read graphics. The length or tension of the controls stick can be adjusted and it is convenient to change the throttle from left to right. The WK-2801 supports both helicopters and airplanes. It offers three helicopter flight modes and each flight mode is capable of free setting and adjusting parameter in order to suit the various requirements of F3C or 3D aerobatic flights. Capable of wireless data copy and transfer between two transmitters. Four Adjustable hot keys facilitate easy entry into the set menu. Eight model memory storage. Gyro rate adjustment by transmitter, and convenient programmed hover and 3D flights. |
|
|
CMP Engine Mount (Large) $21.95 CMP Engine Mount (Large) |
|
|
Gee Bee 25 - 40" Fuel/Electric Radio Remote Controlled RC Racer Plane $199.95 Gee Bee - 25 Fuel/Electric Radio Remote Controlled ARF Airplane Model - Top quality wood construction with fiberglass fuselageComes with all hardware and accessories. Totally overpowered and oversized, incredibly disproportionate, the Gee Bee looked as though it would never get off the ground. Yet, in the Golden Age of pylon racing, there was no airplane that could lay claim to more wins or more memorable, remarkable looks than the Gee Bee. True-to-scale fiberglass fuselage! Molded and painted, the fiberglass cowl offers assembly ease All precision-formed fiberglass parts?from the fuselage to the cowl, wheel pants and rudder?are painted to match a traditional trim scheme The Gee Bee's fiberglass fuselage is amazingly spacious as well as durable Specifications: Wing Span:1005mm(39.5″) Length:610mm(24″) Weight:1200g(2.6 lb) Wing Area:17dm2(262sq in) Wing Loading:70.6g/dm2(25oz/ sq in) What the Pro says! Very nice little plane. Good glasswork on the fuse and cowl, good woodwork and covering on the wings. I went electric, with the Monster Power 25 motor, 80a Hobbywing ESC, and 4s2200 Fusion Power Lipo. As far as glow goes, don't be tempted to go beyond the .25 recommended, anything more would be quite hairy. It goes together pretty fast, the instructions are a bit scanty, but adequate. The wheel pants and small tires preclude grass field operation, it will nose over too easily. As it is, you need to be careful on pavement to keep from nosing over. It's a good deal at $79, for sure, it looks great, very cute airplane, very complete package, surprising quality for the price.For more reviews and comments on other NitroPlanes.com products by rc enthusiasts, click here. The Gee Bee's fiberglass fuselage is amazingly spacious as well as durable, which makes servo and receiver installation a snap! |
|
|
Extra-330L 80-100CC Gas Engine Power Aerobatic RC Airplane $899.95 80cc~100cc GAS ENGINE POWER AEROBATIC AIRCRAFT ALMOST READY-TO-FLY RADIO CONTROLLED The CMPro 100cc Extra-330L features a gorgeous pre finished glass fiber fuselage and painted wings. The whole plane is pre-decorated in a very attractive design which sure to draw attention. If you feel the need to use lots of sky with big impressive maneuvers, you must not miss this giant beauty! Wingspan 2600mm Length 2300mm Weight 13.5~14 kg Wing Loading 108~112 dm/2 Airfoil Naca 0014 Wing Area 125 dm/2 Radio Control 4 Ch 9 Servos purchase separately Gas Engine 80~100 purchase separately The underside is finished in a neat but eye-catching design which helps greatly with orientation. A carbon fiber wing tube is supplied with kit. The built-up wings come pre-painted and clear coated. Large control surfaces that bring superb flying performance and make the kit very maneuverable. All the components are nicely finished including a painted cowl and spats, and a tinted canopy. The design is to give a simple and convenient set up for the engine. 90% factory built. Just join the wings, put the engine and a few more simple tasks to get this beauty in the air. |
|
|
T-28 Trojan - 55" EP-Powered RC Warbird Plane ARF $334.95 T-28 Trojan ARF EP Radio Controlled Warbird Plane The Flying Dream T-28 Trojan comes in a very scale finish and a nicely shaped outline as if you were looking at the real thing. The model consists of a HIP (polystrene) fuselage which is strong and durable, spray painted to a very high standard. Main wings and the tails are balsa-made, factory covered under the new printed-on covering film. All the small details are printed on the film to enhance realistic feelings and it makes the plane a great choice for the scale enthusiasts. The T-28 Trojan is also a scale warbird of outstanding performance. Its large degree of hihedral allows a stable control of the plane and this results in a very smooth flying which you would expect from a Trojan! Wingspan 1400mm Length 1130mm Weight 2300-2400g Wing Loading 71~74 dm/2 Airfoil Naca~0014 Wing Area 32.5 dm/2 Radio Control 4 Ch 4 Servos purchase separately Motors A3520/6~A4120/7 purchase separately ESC 20A~30A purchase separately The well-known T-28 Trojan is presented in a highly visible classic color scheme with good contrasts to make orientation easier during flight. The attractive ready applied decals on the painted fuselage add to the scale look of the model and are protected by a clear-coat for more durable use. The model comes with a 10 wheel, realistic undercarriage giving an extremely steady and straight tracking take off and landing roll. An easily accessed and neat compartment for the battery is featured to help ultra fast installation The fairly close coupled motors make a good choice for your first single engined scale warbird. An ideal fun aircraft for scale enthusiasts. |
|
|
Military EDF Predator UCAV 101mm Electric Ducted Fan RC Airplane $319 The EDF Predator UCAV from Nitro Planes is a large fiberglass jet model with sheeted wings. It comes complete with landing gear, fiberglass canopy, missiles, and all hardware. The model can be powered by a 90mm to 101mm ( 3.5" to 4" ) EDF unit. EDF Predator UCAV 101mm Electric Ducted Fan Airplane Top Features Top quality wood construction with fiberglass fuselage Comes with all hardware and accessories Specifications Wing Span: 47.2 in / 1200mm Wing Area : 521 sq in / 33.8 sq dm Flying Weight : 6.6 lb / 3000 g Fuselage Length : 58.7 / 1490 mm Electronics Required : 4 Channels Radio Transmitter 5 Servos EDF : 101 mm / 4 in Brushless Motor : D36 x L 36 mm 2000 KV Speed Controller : 22.2 V ; 85A Li-poly Battery : 4000 mAh 25 C 22.2 V Click here for UCAV Review/Build Thread The fuselage and parts come well secured in the custom box. All the parts are covered in plastic or bagged. The control surfaces arrive attached with hinge material but need to be CA'ed in place after alignment. The fiberglass canopy is pre-finished and only needs the latch mechanism attached. The landing gear are fixed with a steerable nose wheel assembly. Two sheets of finishing decals are supplied and the 7-page manual, although sparse, provides sufficient photos and text to complete the model by an experienced assembler. Photos A closer look at the fuselage reveals the size, quality finish, construction techniques, and high level of pre-assembly. The T-nuts are already installed, and glued in place, for the gear mains and steerable nose wheel assembly. The battery and servo trays are also pre-installed. Photos Click here for UCAV Review/Build Thread |
|
|
421 Scale RC Aircraft Twin-Engine 46 - 71" Nitro/Electric Powered Remote Control Airplane ARF $499.95 421 Twin Engine Fuel/Electric-Powered Radio Controlled RC Plane ARF Wing Span: 71in / 1800mm Wing Area: 763 sq.in / 49.5 sq.dm Flying Weight: 11.0 lbs /5000g Fuselage Length: 62.6in / 1590mm Engine Required: 2c :0.40-0.46 x2 Radio Required: 6 channels ; 10-11 servos What the Pro says (More reviews here) The quality and engineering is excellent. It goes together VERY fast, far and away the fastest twin to build I have ever done. Everything fits perfectly, and the level of prefabrication is very high. The instructions are English and decent. It comes with fixed gear, and it's set up for retracts, too. I am waiting on a set of Robart air retracts to complete my plane. Mechanical retracts could be done, with a little engineering on your part.I am using two each of Exceed Monster Power 46 outrunners, Volcano 80A Escs, and Fusion Power 3200 5s lipos. The servos are all T-Pro SG5010 standard servos. I have used a bunch of them before with no issues, they are quite a bargain. Normally, on a plane this size, which will end up at least 10 pounds, I'd use something stronger on the elevators, but this plane is set up with two elevator servos, so standard servos are just fine. I will be using a seperate UBEC on one of the batteries to power the radio. Actually, maybe two of them. On previous large twins like the B25, P82, and Mosquito, I have used 5000mah packs, but long flights of 10 minutes or so have left me landing with over half the battery still left, so this time, I went with 3200, should be plenty. The nacelles are each one large fiberglass piece. This makes access to the interior very easy. If you wanted to, it would be easy enough to cut off the cowl portions to make them seperate. What engines will fit? It is set up for two 40s, I think four strokes should go in without any real problem, too. With my electrics, I made up my own plywood box motor mounts, but nice nylon mounts and good quality fuel tanks and tubing are all included in the kit, if you want to go glow. Did I mention how nice the glasswork and paint are? Along with all the woodwork and covering? Nice quality, and LIGHT. Oh...and you can't tell from the pictures, but it includes split flaps, too. I swapped out a few pieces of hardware along the way...what is included is good quality, but I don't like using EZ connectors on flight controls, so I soldered threaded couplers onto my elevator and rudder pushrods and added clevises instead. The rest of the hardware all got used. There is a nice set of decals(stickers) included. Not sure what of them I will use, I want to make mine a little different from the box top. Anyway...so far...delighted! Many pleasant surprises with this model. More from the Pro NitroModels keeps growing and learning, it really |
|
|
New CMP Edge-540T 2c 40~46 4c 52~63 Engine Powered Aerobatic RC Aircraft ( ARF ) $339 Edge-540T 2c 40~46 4c 52~63 Engine Powered Aerobatic Aircraft Edge-540T 50Size The CMPro Edge-540T 50 ARF comes pre-covered in a dazzling color design that will not fail to draw attention. Construction is built-up balsa throughout except for the cowl and spats. This results in a light but strong model. The kit also includes a fiberglass landing gear and polystyrene spats which are strong and durable. All the components are pre-finished and pre-painted at factory to maximum your fun of flying. The kit provides a large area of control surface movements for superb performance: Full aileron design Elevator surface movement approx. 50% Rudder surface movement approx. 60% These features have made our Edge very manoeuverable and thus anymore wishing to try precision aerobatics must not miss this kit! Wingspan 1400mm Length 1270mm Weight 2.8~2.9 kg Wing Loading 90~93 dm/2 Airfoil Naca 0012 Wing Area 31 dm/2 Radio Control 4 Ch 5 Servos purchase separately 2 Strok Engine 40~46 purchase separately 4 Strok Engine 52~63 purchase separately Construction is neat and simple to provide easy access for engine, servo and etc. Quality control horns for direct and more responsive control. Fiberglass landing gears and polystyrene wheel pants, pre-finished at factory. Glass fiber cowl with gorgeous painting. Fuselage is built up by quality balsawood to minimize weight. Wings and tails come pre-covered with decals ready applied, protected by a clear coat. Removable top hatch to provide plenty of room for assembly. All the components |
|
|
3-Channel Slope Diver EP RTF Radio Remote Controlled RC Airplane RTF $149 *BRAND NEW* ADVANCED 3-Channel R/C Airplane + a Full 3-CH Radio Control Transmitter completed with a Full set of 3 Channel FUTABA Attack 2ER Japanese telecontrol equipment to realize excellent control !!! NEW IN BOX !!! READY TO FLY IN MINUTES The 3-CH Slope Diver has successfully trained thousands of newbie radio controlled pilots worldwide. You'll be flying within minutes of receiving this fully built airplane enjoying over 12 minute flight times on a single charge thanks to our new improved 8.4 NiMH battery and ball bearing gear drive system. Equipped with a powerful variable speed electric motor, which starts with a push of a button, the Slope Diver is capable of take-offs from the ground with its 42" wingspan. Newest design with variable speed control, speed control in your hand. (Not like other just on or off) Specifications: US/English size/weight Metric size/weight 1. Wingspan: 42 inches 1100mm 2. Length: 32 inches 820mm 3. Weight: 15.87 ounces 500g 4. Power Supply (flight pack): 8.4V 600mAh NiMh (7 cell) 8.4V 600mAh NiMh (7 cell) 5. Radio Equipment: Full 3 channel SD transmitter and receiver Full 3 channel SD transmitter and receiver 6. Motor: 380 380 7. Distance of Control: 1600 feet 500m 8. Rising velocity: 16 feet per second 5 meters per second 9. Flight time: 12 or more minutes on each charged flight pack (depending upon if you glide more). 10. Packing details:. Each unit is packed in hard foam insulated box. The r/c jet comes with everything you need to fly - a complete package. This newly designed and released 3-CH R/C Airplane glider/plane kit has a extra large 42 inch (over 1 meter) wingspan and is RTF (ready to fly). It includes a motor, two micro servos with control rods pre-attached, and receiver pre-installed. The kit also includes a 3 Channel radio transmitter, a new powerful 8.4V 600 mAh NiMh (nickel metal hydrade) battery flight pack, and charger. Basically this kit has everything you need to fly the day you receive your package except for the 8 AA batteries that you supply for the radio transmitter. This aircraft operates as both a mo |
|
|
3-Channel Slope Diver EP RTF Radio Remote Controlled RC Airplane RTF Folded Wing $149 *BRAND NEW* ADVANCED 3-Channel R/C Airplane + a Full 3-CH Radio Control Transmitter completed with a Full set of 3 Channel FUTABA Attack 2ER Japanese telecontrol equipment to realize excellent control !!! NEW IN BOX !!! READY TO FLY IN MINUTES The 3-CH Slope Diver has successfully trained thousands of newbie radio controlled pilots worldwide. You'll be flying within minutes of receiving this fully built airplane enjoying over 12 minute flight times on a single charge thanks to our new improved 8.4 NiMH battery and ball bearing gear drive system. Equipped with a powerful variable speed electric motor, which starts with a push of a button, the Slope Diver is capable of take-offs from the ground with its 42" wingspan. Newest design with variable speed control, speed control in your hand. (Not like other just on or off) Specifications: US/English size/weight Metric size/weight 1. Wingspan: 42 inches 1100mm 2. Length: 32 inches 820mm 3. Weight: 15.87 ounces 500g 4. Power Supply (flight pack): 8.4V 600mAh NiMh (7 cell) 8.4V 600mAh NiMh (7 cell) 5. Radio Equipment: Full 3 channel SD transmitter and receiver Full 3 channel SD transmitter and receiver 6. Motor: 380 380 7. Distance of Control: 1600 feet 500m 8. Rising velocity: 16 feet per second 5 meters per second 9. Flight time: 12 or more minutes on each charged flight pack (depending upon if you glide more). 10. Packing details:. Each unit is packed in hard foam insulated box. The r/c jet comes with everything you need to fly - a complete package. This newly designed and released 3-CH R/C Airplane glider/plane kit has a extra large 42 inch (over 1 meter) wingspan and is RTF (ready to fly). It includes a motor, two micro servos with control rods pre-attached, and receiver pre-installed. The kit also includes a 3 Channel radio transmitter, a new powerful 8.4V 600 mAh NiMh (nickel metal hydrade) battery flight pack, and charger. Basically this kit has everything you need to fly the day you receive your package except for the 8 AA batteries that you supply for the radio transmitter. This aircraft operates as both a |
|
|
3-Channel Slope Diver EP RTF Radio Remote Controlled RC Airplane RTF Folded Wing Version ( White) $149.95 *BRAND NEW* ADVANCED 3-Channel R/C Airplane + a Full 3-CH Radio Control Transmitter completed with a Full set of 3 Channel FUTABA Attack 2ER Japanese telecontrol equipment to realize excellent control !!! NEW IN BOX !!! READY TO FLY IN MINUTES The 3-CH Slope Diver has successfully trained thousands of newbie radio controlled pilots worldwide. You'll be flying within minutes of receiving this fully built airplane enjoying over 12 minute flight times on a single charge thanks to our new improved 8.4 NiMH battery and ball bearing gear drive system. Equipped with a powerful variable speed electric motor, which starts with a push of a button, the Slope Diver is capable of take-offs from the ground with its 42" wingspan. Newest design with variable speed control, speed control in your hand. (Not like other just on or off) Specifications: US/English size/weight Metric size/weight 1. Wingspan: 42 inches 1100mm 2. Length: 32 inches 820mm 3. Weight: 15.87 ounces 500g 4. Power Supply (flight pack): 8.4V 600mAh NiMh (7 cell) 8.4V 600mAh NiMh (7 cell) 5. Radio Equipment: Full 3 channel SD transmitter and receiver Full 3 channel SD transmitter and receiver 6. Motor: 380 380 7. Distance of Control: 1600 feet 500m 8. Rising velocity: 16 feet per second 5 meters per second 9. Flight time: 12 or more minutes on each charged flight pack (depending upon if you glide more). 10. Packing details:. Each unit is packed in hard foam insulated box. The r/c jet comes with everything you need to fly - a complete package. This newly designed and released 3-CH R/C Airplane glider/plane kit has a extra large 42 inch (over 1 meter) wingspan and is RTF (ready to fly). It includes a motor, two micro servos with control rods pre-attached, and receiver pre-installed. The kit also includes a 3 Channel radio transmitter, a new powerful 8.4V 600 mAh NiMh (nickel metal hydrade) battery flight pack, and charger. Basically this kit has everything you need to fly the day you receive your package except for the 8 AA batteries that you supply for the radio transmitter. This aircraft operates as both |
|
|
3-Channel Slope Diver EP RTF Radio Remote Controlled RC Airplane RTF Folded Wing Version ( Yellow) $149.95 *BRAND NEW* ADVANCED 3-Channel R/C Airplane + a Full 3-CH Radio Control Transmitter completed with a Full set of 3 Channel FUTABA Attack 2ER Japanese telecontrol equipment to realize excellent control !!! NEW IN BOX !!! READY TO FLY IN MINUTES The 3-CH Slope Diver has successfully trained thousands of newbie radio controlled pilots worldwide. You'll be flying within minutes of receiving this fully built airplane enjoying over 12 minute flight times on a single charge thanks to our new improved 8.4 NiMH battery and ball bearing gear drive system. Equipped with a powerful variable speed electric motor, which starts with a push of a button, the Slope Diver is capable of take-offs from the ground with its 42" wingspan. Newest design with variable speed control, speed control in your hand. (Not like other just on or off) Specifications: US/English size/weight Metric size/weight 1. Wingspan: 42 inches 1100mm 2. Length: 32 inches 820mm 3. Weight: 15.87 ounces 500g 4. Power Supply (flight pack): 8.4V 600mAh NiMh (7 cell) 8.4V 600mAh NiMh (7 cell) 5. Radio Equipment: Full 3 channel SD transmitter and receiver Full 3 channel SD transmitter and receiver 6. Motor: 380 380 7. Distance of Control: 1600 feet 500m 8. Rising velocity: 16 feet per second 5 meters per second 9. Flight time: 12 or more minutes on each charged flight pack (depending upon if you glide more). 10. Packing details:. Each unit is packed in hard foam insulated box. The r/c jet comes with everything you need to fly - a complete package. This newly designed and released 3-CH R/C Airplane glider/plane kit has a extra large 42 inch (over 1 meter) wingspan and is RTF (ready to fly). It includes a motor, two micro servos with control rods pre-attached, and receiver pre-installed. The kit also includes a 3 Channel radio transmitter, a new powerful 8.4V 600 mAh NiMh (nickel metal hydrade) battery flight pack, and charger. Basically this kit has everything you need to fly the day you receive your package except for the 8 AA batteries that you supply for the radio transmitter. This aircraft ope |
|
|
Large Hydroplane RC Boat $39.89 Hydroplane off shore RC boat comes with high performance motors that achieve quick speeds and great maneuvering capabilities. Each hydro boat comes packed with a 7.2v rechargeable battery and charger! Features authentic and stylish detailing, this remote conrol boat is perfect for pools, ponds, rivers, lakes, and the ocean too. Bring this full functional reproduction of an offshore rc boat out to the water and star having fun! The propellers can be controlled from the dual joystick transmitter to provide top speeds with forward, left, and right turning functions. Order 2 and get separate frequencies for the remote controls so you can race head to head. SPECIAL FEATURES: Full Function Radio Controlled Powered By High Performance Racing Motors Prof. Designed Propellers Prof. Hi-Capacity Rechargeable Battery & Quick Battery Charger Make The Boat Race More Enjoyable Vector-Push Design Easy To Be Controlled 100% Metal Actuating Mechanism Which Is Durable Detailed Exterior Glossy Exterior Paint Factory Assembled Ready to Run Remote Control Included 7.2v Battery Pack & Charger Included ($39.99 Value) 8 AA Batteries For Controller Included Searching for more Summer toys and radio control boats? Browse our full line of remote control boats and pool toys . |
|
|
Mini RC Airplane $59.98 Mini RC airplanes are now a reality. This mini rc airplane is built with high quality impact materials. Check out the hottest toy of the year called the Palm Z micro RC airplane which can be flown inside your own living room! Our mini RC planes are so much fun to fly anywhere at any time! Order Toll Free 1-800-350-5420 Have Questions? Please e-mail us at Info@TrendTimes.com On-board MICROPROCESSOR flight-controlled mini rc airplane. Fully assembled with battery, radio/charger, and microprocessor included. New technology allows for Super-light Butterfly-weight (only 58 grams) gives superb flight performance Use of advanced Aerodynamic and Electronic technologies include: * Dual-parabolic-ellipse, infinite-polyhedral auto-stabilizing wing * Microprocessor controlled twin-motor thrust vectoring. Unprecedented flight Stability W/"flight-path-positive" design Parabolic-sweep, polyhedral self-stabilizing wing Only 19-inch wingspan, easily transportable and packed in a special storage & carry-case Fly like a PRO in-doors or out-of-doors in light winds Single-stick Control mode selectable transmitter * W/built-in symbiotic (transmitter->flight pack) charging circuitry for fast field charges anywhere, anytime. Extremely resistant to damage w/ impact absorbing nosecone Beginner to Expert in 60 seconds This mini rc airplane is the most convenient, versatile and fun rc airplane we feature. This mini rc plane can be flown in small areas such as an arena or basketball court. You can even be flying your new mini rc airplane around your neighborhood! Easy hand launching lets you fly your mini rc airplane just about anywhere. Light winds days are better for mini rc airplanes, but proper flying wll allow almost ten minutes on a two minute charge! Yes, a two minute charge. Every mini rc plane comes with a built in charger in the transmitter that allows you to charge your mini rc airplane battery while you are out having fun flying your mini rc airplane! This mini rc airplane features two charging modes. One mode is for a quick charge of two minutes, and the other mode is for longer flight times and requires only four to five minutes of charge. This mini airplane will level automatically. New micro processor technology allows the two motors on this mini rc airplane to control direction and altitude. There is also a pre-programmed failsafe landing mode! Package comes complete with mini rc plane, transmitter(with built in charger), battery pack, and great stand for when you are not flying and want to show off your new mini rc airplane. ORDER TODAY AND GET A FREE WALL CHARGER FOR YOUR MINI RC AIRPLANE! When flying your mini rc airplane for its inital flight, try flying in a large grassy area to ensure safe landings and become familiar with the controls and what maneuvers your mini rc airplane is capable of. Have fun. Battery:3.6V-110mah(NI-Cd)(internail) Lightest weight Ready-to-Fly Mini RC Airplane In |
|
|
RC Boat Replacement Propellers For Miami Vice Boat And Others $4.99 Set of 2 replacement propellers that will fit the large Miami Vice RC boat and most other RC boats. |
|
|
|
July 28th, 2007 in
RC Airplanes