RC Hovercraft Brushless Edf
RC Hovercraft Brushless Edf
 |
No items matching your keywords were found.
_________________________________________________________________________________
|
|
F22 EDF Jet Replacement Parts (65A51): F22 Brushless Motor 4300RPM KV $25 F22 EDF Jet Replacement Parts (65A51): F22 Brushless Motor 4300RPM KV |
|
|
Dynam 4-Ch 64mm EDF Brushless-Powered F16 Fighting Falcon RC Remote Control Jet RTF $249.95 One of the most prettiest scaled F-16 ducted fan rc jet in the market today, the Dynam F-16 easily blow the competition away. Powered by a single 64mm edf fan, the Dynam F-16 is designed ready to fly out of the box. Very nice looking jet that will provide plenty of punch in the air. It flips and dives. Climbs and rolls. Slow and fast. Very simple build up. Great for intermediate pilot who wants something good and inexpensive. Specification: Wingspan:670mm Fuselage length:1020mm Wing loading:47g/dm2 Flying weight:650g Servo:9g Battery:11.1V 2200mAh 15C Li-Po ESC:60A Brushless Out runner Motor:KV:4400 Ducted fan: EDF 64mm Remote: 72Mhz Remote Control |
|
|
Exceed RC Mirage 2000 64MM EDF Jet * Receiver-Ready Version * $299.95 This is a Receiver-Ready Mirage 2000 64MM EDF Jet. User is required to have their own TX+RX. Wingspan: 575mm Length: 830mm Flying Weight: 520g Three 9 gram servos Brushless Powered: Powerful 14L inner runner brushless motor and 25A ESC Battery: 3 Cell Li-Po Battery,1300 mAh,11.1V Additional Requirements: Radio System: 4Ch Tx and 6 Ch Rx, Exceed RC has now shrunk this fighter jet so you can fly at your own hands. The Exceed Rc Mirage 2000 Lighting Red Series is made with high performance Ducted Fan, Receiver-Ready right out of the box with minimum assembly required. Exceed RC Mirage 2000 is powered by the new developed 14L inner runner brushless motor with 25A ESC electric speed controller. The Exceed RC Mirage 2000 Lighting Red Series RTF Scale Jet is an all-molded foam airplane that comes completely painted in an attractive matte finish with waterslide decals applied. The 64mm fan with brushless inner runner motor is pre-installed, as is the 25A brushless speed control. The jet has 3 preinstalled servos. Landing gear is fixed but can be easily removed for hand launching. Battery changes are quick, just remove the hatch and place it in. The Exceed RC Mirage 2000 jet is large enough for good visibility in flight, but is easily transported. The thrush from the 64mm fan with the included 3 cell Li-po Battery 1300 mAh 11.1V will quickly accelerate the Exceed RC Mirage 2000 Jet into the air. The climb out is steep and the speed impressive. The full scale Mirage 2000 had the glide angel of a brick; our version display much more pilot friendly manners. Due to its light weight, the Mirage 2000 flying character, making landings a thing of beauty. Flight times are about 10 on a charge. |
|
|
RC Lander Hawker Hunter 70mm EDF RC Jet w/ Retractable Landing Gear $449.95 RCLander Hawker Hunter 70mm RC Electric Ducted Fan EDF Jet Features RCLander Hawker Hunter 70mm RC Electric Ducted Fan EDF Jet Precision Molded EPO Airframes With Outstanding Detail & Scale Appearance Full set door system Perfect for all levels: beginners, middle-level users, or experienced pilots. Beautiful design and great details: resembling real plane Factory-finished for aggressive fighter jet appearance. Construction: Lightweight, strong, and crash resistant. Easily take off: can depart from either ground or hand effortlessly. Powerful ducted fans with brushless motors and brushless ESC and strong wing designed for smooth airflow: providing exceptional stability, and great ease to control and fly even with wind Full function control of the plane: Throttle, Aileron control, Rudder, Elevator, flaps, Door operate System Fuselage: Durable pre-colored foam fuselage, wings and tail Specifications Wingspan: 1050mm / 41.3" Length: 1000mm / 39.3" Weight: 1000g/38.8oz to 1500g/52.9oz Power system: Single 70mm EDF ESC: 60A or above Functions: Throttle, Aileron control, Rudder, Elevator, flaps, Door operate System Servo: 9g X 8 Battery: 14.8V 4S 2250mah or higher Li-Polymer Radio: 6CH Package Contents RCLander Hawker Hunter 70mm RC Electric Ducted Fan EDF Jet User Manual What you need to Complete 6CH Channel Transmitter Compatible receiver Motors Servos ESC Ducted Fan Unit Lithium-polymer battery Requires: Brushless Motor, Controller, LiPo, Servos, Receiver & Transmitter Battery: 4S-2500, 4S-3300 or 4S-3700 |
|
|
Newest Black EF2000 Eurofighter RC Ducted Fan Jet w/ 64mm EDF, Brushless-Power, LiPo Battery 100% Ready-to-Fly $299.95 Newest Black EF2000 EuroFighter Typhoon - Newest Brushless Radio Controlled Electric Ducted Fan (EDF) RC Jet 100% Ready-to-Fly Art-Tech has reveal an impressive innovative fast and fearsome EF-2000 EDF ready to fly jet right out of the box. You don?t need to purchase any other parts to get this jet to fly. The EF2000 can reach up to some outrageous speed of 75+ mph because it is super light weight construction and its detailed design is sure to make heads turn. It may look plain to the untrained eye but the slick stealthy black design gives it that characteristic that no one can overlook. The jet is easy to assemble and a breeze to fly. Good for any skill of flyers from novice to professional level flyers. The front landing gear could turn around making landing and directional movement on land simple. The Art-Tech EF-2000 edf jet is made for speed and performance. EF-2000 EDF RC Jet Review by: Nightflyyer w/ Pocket Cam X Flies great at slow speeds with little tip stall tendencies. Fantastic looking Profile in the sky. Long flight time at 10 minutes or more. Easy to fly. Fast. EF2000 Factory test flown This scale ducted fan plane is designed on the basis of EU fighter EF2000 with unique Appearance and layout. It owns a vivid flight gesture and fluent aerobatic capacity! It even comes with a scaled pilot installed! Specifications: ★Wing Span: 648mm/25.5in ★Length: 979mm38.5in ★Height: 242mm/9.5in ★Weight: 650g/22.9 oz ★R/C System: 4-Channel Transmitter Characteristic: ★Unique Ap-layout, perfect syntheses of maneuverability and flexibility. ★Front landing gear could turn around. Thanks to rudder, its flight could be changed skillfully during its flight course, fluent aerobatics capacity. Flight course could be easily chosen, leveled and corrected when landing. ★Blocking design. Parts as duct wing, ESC, motor, servo, receiver, linkage steel, nose cowl etc could be repaired and changed expediently. ★Brushless ESC will be cooled quickly by its incoming airflow and pumping wind from ducted fan, which prevent it from heat influence during working. ★Scale appearance and flight as EU fighter EF2000. |
|
|
New 2.4GHz F-4E Jolly Roger Phantom EDF Brushless RC Jet 100% Ready-to-Fly $349.95 The F-4E Phantom EDF RC Jet is the latest creation from Exceed RC and there IS a difference as to who designs these, this F4-E jet just has the magic touch, and it shows in the scale accuracy of the overall plane, and also in a lot of thoughtful little details and engineering that really make it stand out from the competition. It's beautiful! Small, and very high performance... Now with 2.4GHz and 100% Ready-to-Fly with Everything Included! This is a truly ready to fly radio controlled airplane that includes everything, including the battery and charger! You DO NOT need to buy anything else! Very high quality molding, lots of detail, good paint, good water transfer decals, clear canopy with cockpit deck, easily removable or replaceable landing gear, full flying stab, easy fan access for maintenance, lots of nice features. In the air, it's pure dynamite, everybody guesses it to be about 70mph, and that's very fast for such a small airplane! It's a whole level of performance above the rest of the RTF EDF jets... It's basically the smallest airframe that you can wrap around a 64mm fan. Hand launching is really easy, there is a grip molded in for doing it, and you don't need to heave it, it will fly away from just a light toss with no problems. Roll rate is tremendous, vertical performance is awesome, and downright speed, well...most EDFs, you fly around at full bore all the time, with this one, you want to save full throttle for verticals and high speed passes, and throttle back to half or two thirds to keep the thing manageable the rest of the time, it's mighty quick. It's very easy to land, I have been bellying mine in on the grass with no problems, though you might want to put a little glass cloth on the lower lip of the intakes, they tend to snag the grass and get chipped up. With the landing gear on, off pavement, it has no bad habits at all. The gear comes on and off with a few screws in a minute or two. It takes up no room in the car, it can fly out of small parks, or you can take it to the club field and mix it up with the big boys, it costs little, it requires no maintainance, it looks great, and it flies great. It's my new favorite airplane! F-4E Review & Flight |
|
|
Exceed RC F-35 EDF Replacement Parts: Charger $20 Exceed RC F-35 EDF Replacement Parts: Charger |
|
|
Exceed RC F-35 EDF Replacement Parts: ESC $25 Exceed RC F-35 EDF Replacement Parts: ESC |
|
|
Exceed RC F-35 EDF Replacement Parts: Motor $25 Exceed RC F-35 EDF Replacement Parts: Motor |
|
|
Exceed RC F-35 EDF Replacement Parts: Servo $10 Exceed RC F-35 EDF Replacement Parts: Servo |
|
|
Exceed RC F-35 EDF Replacement Parts: Transmitter $25 Exceed RC F-35 EDF Replacement Parts: Transmitter |
|
|
AirField 70MM Brushless EDF F-16 Thunderbird Electric Ducted Fan Radio Controlled RC Jet w/ Bombs RTF $399.95 This 70mm F-16 Fighter is a high quality EPS foam model of the famous ?Fighting Falcon?. The F-16 is known as the ?Viper? in US service. It was the first fighter designed to sustain 9g maneuvers. One of the outstanding features is its frameless bubble canopy, which gives excellent all-round vision. The F-16 has been and will remain the multi-role workhorse of the United States Air Force. The F-16 was the main fighter used in the 1991 Gulf War and is still used in today?s ?War on Terror?. The Air National Guard regularly deploys these fighters to the Middle East. In honor of the US Fighters, it is only appropriate that we built these jets with extra care and fine detail. It is painted with an excellent finish to make it look just like the real thing. No details were left out, from the after burner, the missiles, to the predominant nose. To do the F-16 justice, we used the newest electronics and gave it the U.S. Air Force look. Even though we went out of the way to mirror the real F-16, this EDF Jet was also built to be user friendly and ready to fly. The fuselage is pre-assembled and it requires very minimal assembly to get it soaring in the sky. 4 Channel Full Function Radio Controlled (Aileron,Elevator,Rudder,Throttle) Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible Excellent hedgehopping performance High speed, flying speed at 80mph+!!! Excellent stability of nosing up and down State of the art components such as Outrunner Brushless Ducted Fan, 45amp Speed Control, and 2200mah 20C 14.8 Volt Li-Po Battery Pack famousus "Cobra Maneuver" available Steerable nose landing gear Rudder helps steer plane on ground on its scale landing gear for easy take off Super tough, lightweight airframe! Shock Resistant Reinforced fuselage and Strong Wings Can Take Off From Ground or Hand Launched Ground Take-Off can be performed easily Excellent Flight Performance Super easy and super stable electric powered scale R/C park flyer for beginner or middle-level users Stable inverted flight fuselage with pre-installed Electronics, Motor, Servos, and Speed Controller Superb Quality, Simply the Best RTF Jet you can find!!! Super stable for beginner, Super low speed for safety, Super low altitude for fun Fabricated by accurate molds with high fidelity of real airplane Excellent stability and aerobatic capability High roll rate Digital |
|
|
AirField 70MM Brushless EDF F-16 Tiger Jet Electric Ducted Fan RC Jet w/ Bombs RTF $399.95 This 70mm F-16 Fighter is a high quality EPS foam model of the famous ?Fighting Falcon?. The F-16 is known as the ?Viper? in US service. It was the first fighter designed to sustain 9g maneuvers. One of the outstanding features is its frameless bubble canopy, which gives excellent all-round vision. The F-16 has been and will remain the multi-role workhorse of the United States Air Force. The F-16 was the main fighter used in the 1991 Gulf War and is still used in today?s ?War on Terror?. The Air National Guard regularly deploys these fighters to the Middle East. In honor of the US Fighters, it is only appropriate that we built these jets with extra care and fine detail. It is painted with an excellent finish to make it look just like the real thing. No details were left out, from the after burner, the missiles, to the predominant nose. To do the F-16 justice, we used the newest electronics and gave it the U.S. Air Force look. Even though we went out of the way to mirror the real F-16, this EDF Jet was also built to be user friendly and ready to fly. The fuselage is pre-assembled and it requires very minimal assembly to get it soaring in the sky. 4 Channel Full Function Radio Controlled (Aileron,Elevator,Rudder,Throttle) Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible Excellent hedgehopping performance High speed, flying speed at 80mph+!!! Excellent stability of nosing up and down State of the art components such as Outrunner Brushless Ducted Fan, 45amp Speed Control, and 2200mah 20C 14.8 Volt Li-Po Battery Pack famousus "Cobra Maneuver" available Steerable nose landing gear Rudder helps steer plane on ground on its scale landing gear for easy take off Super tough, lightweight airframe! Shock Resistant Reinforced fuselage and Strong Wings Can Take Off From Ground or Hand Launched Ground Take-Off can be performed easily Excellent Flight Performance Super easy and super stable electric powered scale R/C park flyer for beginner or middle-level users Stable inverted flight fuselage with pre-installed Electronics, Motor, Servos, and Speed Controller Superb Quality, Simply the Best RTF Jet you can find!!! Super stable for beginner, Super low speed for safety, Super low altitude for fun Fabricated by accurate molds with high fidelity of real airplane Excellent stability and aerobatic capability High roll rate Digital Propor |
|
|
Military EDF Predator UCAV 101mm Electric Ducted Fan RC Airplane $319 The EDF Predator UCAV from Nitro Planes is a large fiberglass jet model with sheeted wings. It comes complete with landing gear, fiberglass canopy, missiles, and all hardware. The model can be powered by a 90mm to 101mm ( 3.5" to 4" ) EDF unit. EDF Predator UCAV 101mm Electric Ducted Fan Airplane Top Features Top quality wood construction with fiberglass fuselage Comes with all hardware and accessories Specifications Wing Span: 47.2 in / 1200mm Wing Area : 521 sq in / 33.8 sq dm Flying Weight : 6.6 lb / 3000 g Fuselage Length : 58.7 / 1490 mm Electronics Required : 4 Channels Radio Transmitter 5 Servos EDF : 101 mm / 4 in Brushless Motor : D36 x L 36 mm 2000 KV Speed Controller : 22.2 V ; 85A Li-poly Battery : 4000 mAh 25 C 22.2 V Click here for UCAV Review/Build Thread The fuselage and parts come well secured in the custom box. All the parts are covered in plastic or bagged. The control surfaces arrive attached with hinge material but need to be CA'ed in place after alignment. The fiberglass canopy is pre-finished and only needs the latch mechanism attached. The landing gear are fixed with a steerable nose wheel assembly. Two sheets of finishing decals are supplied and the 7-page manual, although sparse, provides sufficient photos and text to complete the model by an experienced assembler. Photos A closer look at the fuselage reveals the size, quality finish, construction techniques, and high level of pre-assembly. The T-nuts are already installed, and glued in place, for the gear mains and steerable nose wheel assembly. The battery and servo trays are also pre-installed. Photos Click here for UCAV Review/Build Thread |
|
|
4-Ch Brushless FMS L-39 64mm Electric Ducted Fan (EDF) RC Fighter Jet 100% RTF @ 80mph!!!! $149.95 Feature: Futaba-Stanard 4 Channel Full Function Radio Controller (Aileron, Elevator, Throttle) Full aerobatic characteristics of a real airplane w/ Digital Proportional Motor Speed Control Excellent flying performance and very stable, very fast at over 70mph! Fuselage-preinstalled w/ the high quality Outrunner Brushless Ducted Fan, 25amp Speed Control, and 1300mah 20C 11.1 Volt Li-Po Battery Pack Super tough, lightweight foam plane w/ shock resistance airframe and strong durable wings! Perfect scale appearance w/ detailed body structure Excellent Flight Performance Great plane for intermediate pilot who's ready for the next level in radio control plane Excellent inverted flight control and high roll rate Approximately 10 minutes flight time on each charge All spare parts and accessories are available (Visit our Support Forum for Technical Help) 100% Ready to Fly in Just Minutes! Complete Kit, Easy to Assemble (Everything is included and 90% assembled -- only required 8 AA batteries for the transmitter) Specification: Wingspan: 800mm (31.5 in) Length: 960mm (38 in) Flying Weight: 650g (23 oz) Drive System: Ducted Fan 64mm (Powerful 4300KV Inrunner Brushless Motor) Servo: 4X 9g high speed micro servos Speed Controller: 30 Amp Brushless Speed Control Battery: 11.1V 1300mah 15C Li-Polymer Control system: 4 CH Multifunctional FM Radio Transmitter and Receiver Radio Control Range: 3000 feet (1000m) Package Include: Airplane (90% assembled) 4 Channel Multifunctional FM Radio Transmitter Balance Battery Charger High Quality Rechargeable 11.1V 1300mah 15C Li-Polymer Battery English Manual |
|
|
ARF F-4E Phantom 64mm EDF RC Jet (without TX, RX) $249.95 F-4E Phantom Electric Ducted Fan Radio Control Jet ALMOST-READY-TO-FLY-VERSION WITHOUT TRANSMITTER+RECEIVER Factory Flight Test F-4E Review & Flight This is the latest creation from the fertile mind of genius EDF designer Andy Chen...there IS a difference as to who designs these, this guy just has the magic touch, and it shows in the scale accuracy of the overall plane, and also in a lot of thoughtful little details and engineering that really make it stand out from the competition. It's beautiful! Small, and very high performance...Very high quality molding, lots of detail, good paint, good water transfer decals, clear canopy with cockpit deck(the pics on the nitroplanes website show an early prototype with a tinted canopy), easily removeable or replaceable landing gear, full flying stab, easy fan access for maintanance, lots of nice features. In the air, it's pure dynamite, everybody guesses it to be about 70mph, and that's very fast for such a small airplane! It's a whole level of performance above the rest of the RTF EDF jets... It's basically the smallest airframe that you can wrap around a 64mm fan. Hand launching is really easy, there is a grip molded in for doing it, and you don't need to heave it, it will fly away from just a light toss with no problems. Roll rate is tremendous, vertical performance is awesome, and downright speed, well...most EDFs, you fly around at full bore all the time, with this one, you want to save full throttle for verticals and high speed passes, and throttle back to half or two thirds to keep the thing manageable the rest of the time, it's mighty quick. It's very easy to land, I have been bellying mine in on the grass with no problems, though you might want to put a little glass cloth on the lower lip of the intakes, they tend to snag the grass and get chipped up. With the landing gear on, off pavement, it has no bad habits at all. The gear comes on and off with a few screws in a minute or two. It takes up no room in the car, it can fly out of small parks, or you can take it to the club field and mix it up with the big boys, it costs little, it requires no maintainance, it looks great, and it flies great. It's my new favorite airplane! Features: -State of the Art Foam -Fully Proportional Elevator, Rudder and Throttle Controls -Improved Aerodynamic with innovative Wing and Fuselage Design -Durable Fuselage and Wings Construction -Easy to learn for Beginner and Fun to Fly for Experts Wingspan: 542mm Length: 788mm Flying Weight: 540g Wing Area: 8dm^2 Wing Load: 67g/dm^2 64mm Ducted Fan Servos : 4 9G Servos Motor : 14L inner brushless motor ESC : 25A Battery : 11.1V 1300mAH LiPo Battery Radio System REQUIRED : 4-Channel TX and 6CH Rx |
|
|
4-Channel UCAV Predator 47" 101MM EDF Radio Remote Control RC Airplane ARF $299 Top quality wood construction with fiberglass fuselage Comes with all hardware and accessories Wing Span: 47.2 in / 1200mm ; Wing Area : 521 sq in / 33.8 sq dm Flying Weight : 6.6 lb / 3000 g ; Fuselage Length : 58.7 / 1490 mm Radio Required : 4 Channels ; 5 Servos ; EDF : 101 mm / 4.0 in Brushless Motor : D36 x L 36 mm ; 2000 KV ; Speed Controller : 22.2 V ; 85A ; Li-poly Battery : 4000 mAh ; 25 C ; 22.2 V |
|
|
4-Ch Brushless FMS L-39 64mm Electric Ducted Fan (EDF) RC Fighter Jet 100% RTF @ 80mph!!!! Blue Edition $139.7 Futaba-Stanard 4 Channel Full Function Radio Controller (Aileron, Elevator, Throttle) Full aerobatic characteristics of a real airplane w/ Digital Proportional Motor Speed Control Excellent flying performance and very stable, very fast at over 70mph! Fuselage-preinstalled w/ the high quality Outrunner Brushless Ducted Fan, 25amp Speed Control, and 1300mah 20C 11.1 Volt Li-Po Battery Pack Super tough, lightweight foam plane w/ shock resistance airframe and strong durable wings! Perfect scale appearance w/ detailed body structure Excellent Flight Performance Great plane for intermediate pilot who's ready for the next level in radio control plane Excellent inverted flight control and high roll rate Approximately 10 minutes flight time on each charge All spare parts and accessories are available (Visit our Support Forum for Technical Help) 100% Ready to Fly in Just Minutes! Complete Kit, Easy to Assemble (Everything is included and 90% assembled -- only required 8 AA batteries for the transmitter) Wingspan: 800mm (31.5 in) Length: 960mm (38 in) Flying Weight: 650g (23 oz) Drive System: Ducted Fan 64mm (Powerful 4300KV Inrunner Brushless Motor) Servo: 4X 9g high speed micro servos Speed Controller: 30 Amp Brushless Speed Control Battery: 11.1V 1300mah 15C Li-Polymer Control system: 4 CH Multifunctional FM Radio Transmitter and Receiver Radio Control Range: 3000 feet (1000m) Airplane (90% assembled) 4 Channel Multifunctional FM Radio Transmitter Balance Battery Charger High Quality Rechargeable 11.1V 1300mah 15C Li-Polymer Battery English Manual |
|
|
4-Ch Brushless FMS L-39 64mm Electric Ducted Fan (EDF) RC Fighter Jet 100% RTF @ 80mph!!!! Silver Edition $299.95 Futaba-Stanard 4 Channel Full Function Radio Controller (Aileron, Elevator, Throttle) Full aerobatic characteristics of a real airplane w/ Digital Proportional Motor Speed Control Excellent flying performance and very stable, very fast at over 70mph! Fuselage-preinstalled w/ the high quality Outrunner Brushless Ducted Fan, 25amp Speed Control, and 1300mah 20C 11.1 Volt Li-Po Battery Pack Super tough, lightweight foam plane w/ shock resistance airframe and strong durable wings! Perfect scale appearance w/ detailed body structure Excellent Flight Performance Great plane for intermediate pilot who's ready for the next level in radio control plane Excellent inverted flight control and high roll rate Approximately 10 minutes flight time on each charge All spare parts and accessories are available (Visit our Support Forum for Technical Help) 100% Ready to Fly in Just Minutes! Complete Kit, Easy to Assemble (Everything is included and 90% assembled -- only required 8 AA batteries for the transmitter) Wingspan: 800mm (31.5 in) Length: 960mm (38 in) Flying Weight: 650g (23 oz) Drive System: Ducted Fan 64mm (Powerful 4300KV Inrunner Brushless Motor) Servo: 4X 9g high speed micro servos Speed Controller: 30 Amp Brushless Speed Control Battery: 11.1V 1300mah 15C Li-Polymer Control system: 4 CH Multifunctional FM Radio Transmitter and Receiver Radio Control Range: 3000 feet (1000m) Airplane (90% assembled) 4 Channel Multifunctional FM Radio Transmitter Balance Battery Charger High Quality Rechargeable 11.1V 1300mah 15C Li-Polymer Battery English Manual |
|
|
Exceed RC F-22 Raptor 70MM 4-Channel Brushless Electric Ducted Fan RC Jet 100% Receiver-Ready $279.95 This is a Receiver-Ready F22 70MM EDF Jet. User is required to have their own TX+RX and Lipo charger. F-22 Electric Ducted Fan Jet Wingspan: 693mm (27") Length: 1000mm (40") Flying Weight: 900g Wing area: 15dm2 Wing Load: 60g/dm2 5 9 gram servos 70MM Ducted fan Brushless Powered: Powerful 2836 inner runner brushless motor and 45A ESC 5A UBEC Battery: 2200Mah, 14.8V, 15C. Additional Requirements Radio System: 4Ch Tx and 6 Ch Rx , LiPo Chargers SOLD Separately |
|
|
|
November 15th, 2008 in
RC Airplanes