RC Handcrafted Model Antique
RC Handcrafted Model Antique
 |
No items matching your keywords were found.
_________________________________________________________________________________
|
|
RC Model Airplane #6 $19.95 This pre-painted scale model pilot is design for arf rc planes. It is made out of light plastic material. |
|
|
4-CHANNEL EP-Powered AT-6 Texan RC AIRPLANE Model Kit (Unassembled) $49.95 Features: 4 Channel Remote Control Airplane Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible Constructed with Super Tough, lightweight EPO material! Perfect appearance and emulation (Scale appearance, great attention has been given to details) True Classic Trainer of All Time! Decorative Waterslide Decals! Easy to Build & Endless Fun to Fly! Perfect Low-Wing Trainer! Rudder helps steer plane on ground on its scale landing gear for easy take off Shock Resistant Reinforced fuselage and Strong Wings Can Take Off From Ground or Hand Launched Ground Take-Off can be performed easily Huge Wing size, Excellent Flight Performance Super easy and super stable electric powered scale R/C park flyer for beginner or middle-level users Stable inverted flight Super stable for beginner, Super low speed for safety, Super low altitude for fun Fabricated by accurate molds with high fidelity of real airplane Excellent stability and aerobatic capability Detailed Body Structure High roll rate Super low speed for safety, Super low altitude for fun Crash Resistant Construction Easy to Fly, Easy to Control, Super stable for beginner Slow Speed Flying Capable, Good for Beginner Suitable for both beginners and experienced pilots Specifications: Wingspan: 900mm (35.4") Length: 680mm (26.7") Flying Weight: 480g (16.9 oz) Requirements: Drive System: 370 carbon brushed motor Servo: 3X 9g high speed micro servos ESC: 20A speed controller Battery: 9.6V 650mah Ni-MH Control system: 4 CH Multifunctional Radio Transmitter and Receiver Included: Airplane Kit Unassembled Screw Driver 4 Propellers English Manual |
|
|
2.4GHz Exceed RC Chinook 47 Tandem RC Helicopter RTF - Army Brown $499.95 The Exceed RC Chinook is a cool looking tandem rotor semi-scale RC helicopter designed to give absolute newcomers and sport pilots great RC model helicopter flying! Up until now, tandem rotor helicopters were considered hugely expensive and difficult to fly so were strictly for experts. Amazingly the Exceed RC Chinook is super easy to hover than normal helicopters - the two coaxial rotor systems working together has to be flown to be believed! The Chinook is sturdy and full of features to improve survivability! When you do crash we will have spares to get you back in the air. Remember that model helicopters are demanding to fly and you will need to train carefully. What is a tandem rotor helicopter? In tandem system, 2 rotors in front and rear counter rotates to each other to negate counter torque. Tandem is more efficient than tail rotor because 2 rotors are used to create lift. 1).All-up Weight: 768g (Battery included) 2).Main Rotor Dia. B: 450mm 3).Main Rotor Dia. A: 450mm 4).Overall Length: 575mm 5).Battery: 7.4V 2200mAh Li-Po 6).Receiver: RX-2409 7).Drive System: 4 X 370SH 8).Transmitter: WK-2401 9).Servo: WK-7.6-3 weight 8.5g;speed 0.11sec/60o(4.8V); torque 0.9kg.cm(4.8V); dimension 22.5X11.5X24mm Features 1). Highly emulational shape with the-state-of-the-art workmanship. 2). New 2.4G technology, with the functions of automatic identification and precise code pairing, can allow above 20 aircrafts to fly in the same field and same time. 3). It utilizes the 2.4G 3-in-1 receiving circuit with the functions of servo extent adjustment and built-in gyro sensitivity adjustment. 4). High performance 4 * 370SH motor powered by 7.4V 2200mAh Lipo offers 10 minute flight time, depending on the flight modes. |
|
|
Wild Horse Edge 540T - 50CC Nitro RC Aerobatic Plane ARF $799 New 2009 Edge 540T-50CC Nitro RC Plane. Wingspan 84", VERY light-weight, great covering, high quality building materials and assembly - all makes this model super attractive. Flying weight ~15 to 16lb with DA50 (click here to purchase engine) and stock muffler. Full 3D maneuvers with plenty of surprises. Super-steady harriers and inverted harriers, incredible spins of all kinds - one of the best 50cc nitro planes in the world. |
|
|
Exceed RC UBEC-3A (2-6S Lipo Input) $19.95 Product Description Model UBEC-3A (2-6S Lipo Input) Manual User Manual Accessory Preview The 3A-UBEC is a switch-mode DC-DC regulator supplied with a 2-6 cells lithium battery pack (or 5-18 cells NiMH /NiCd battery ), it outputs a consistent safe voltage for your receiver, gyro and servos. It is very suitable for RC helicopter. Compared with the linear mode UBEC, the overall efficiency of the switch-mode UBEC is much higher. 1 Specification 1.1 Output Voltage: 5V@3A or 6V@3A (Changeable with an output-voltage select switch ) 1.2 Continuous output current: 3 Amps 1.3 Input: 5.5V-26V (2-6 cells lithium battery pack or 5-18 cells NiMH /NiCd battery) 1.4 Size: 43mm*17mm*7mm (L*W*H) 1.7 Weight: 11g 2 Features 2.1 Designed with an advanced switch mode DC-DC regulator IC. 2.2 The output is powerful even working with 4 to 6 cells Lipo battery. 2.3 Battery polarity reversal protection. 2.4 A metal shield covers almost all the electronic components, and a specially made filter is attached with the output wires to significantly reduce the electromagnetic interference. 2.5 The working status is shown by an indicator (LED), lights when the output is in normal range. |
|
|
12A Brushless RC Speed Controller [Volcano Series] $79.95 Exceed-RC's Volcano Series brushless ESC are micro processor controlled and will work with all types of brushless motors. The Volcano Series brushless ESC can be used in airplanes, sailplanes, helicopters, or 3D helicopters. The controllers come pre-programmed and are ready to use when you receive them. Additional controller adjustments are available and can be accessed and adjusted with your transmitter and program card [ Features Specifications Instruction Manual Buy It Now ] Innovative Discharge Monitoring and Protection Design for real time battery pack monitor Multiple protection features: Low-voltage cut-off protection, over-heat protection, throttle signal loss protection 3 start modes: Normal / Soft / Super-Soft, compatible with fixed-wing aircrafts and helicopters Throttle range can be configured and is fully compatible with all transmitters currently available on the market Smooth, linear and precise throttle response Separate voltage regulator IC for the microprocessor Supported motor speed (Maximum): 210000 RPM (2 poles), 70000 RPM (6 poles), 35000 RPM (12 poles) Our pocket-sized Program Card can be purchased separately to provide easy programming to the ESC at the field. With a program card, you can activate the music playing function on the ESC Model #: Volcano-12 (07E01) Cont. Current: 12A Burst Current (>10s): 15A BEC Mode: Linear BEC Output: 5V/2A Li-ion/Li-poly: 2-4 Ni-MH/Ni-Cd: 5-12 Prgrammable: Yes Weight: 13g Size: 34*24*10 |
|
|
New 3 CH Syma S011 Mini Lama RC Helicopter $79.95 The Syma S011 3ch Mini Lama RC Helicopter is the worlds smallest and lightest 3 channel helicopter. This helicopter is designed for indoor flight only. The double rotor design helps stabilize flight and makes it easier to control. This model is the smallest and easiest to control 3 channel on the market. Feature: 3 channel remote for up, down, left, right, forward, and backward control. Charging Time: 20-30 minutes Lithium Polymer rechargeable battery for extra long battery life For Ages 8+ Requires a 6 x AA batteries(not included) Specification: Measures 6"(L)x1.25"(W)x3.5"(H) 50mAh Lipo Rechargeable Battery Flying Time: 6-8 minutes Package Include: 3-CH Radio Controller w/ Built in ChargerExtra Tail BladeInstruction Manual |
|
|
All NEW Genesis 450PE RC Helicopter - Fully Loaded 2.4Ghz RTF Helicopter CCPM 3D RC w/ CNC Upgrades/Brushless Motor/ESC/Gyro/LiPo Battery/Carbon Fiber Blades,Fi $999.95 "The MOST AWESOME 3D Radio Controlled Helicopter! FULLY-LOADED 2.4GHz" The 450PE RTF Helicopter a fully loaded version 2.4GHz PREMIUM EDITION CCPM 3D RC helicopter, 100% built, Ready-to-Fly! Light and fast, this new machine from Exceed RC has everything you ever wanted. The 450 Premium Edition Helicopter is an advanced rc helicopter designed with the most updated current technology available and produced with the highest quality CNC machining. While most parts are compatible with the world's most popular 450 size electric helicopter such as the T-REX450, the 450 PE is designed with the best features available while eliminating all the weak points from the current T-REX SE. All the hardware is high A-Grade with all hex screws supplied and high quality Germany-imported bearings. What is 2.4Ghz Technology? New 2.4G Spread Spectrum technology allows the transmitter and receiver to be 'locked-on' to the same frequency ensuring much improved reliability and peace of mind when flying. Second, 2.4 Gigahertz systems offers quicker, more responsive control, when compared to a standard frequency system. Third, Operating at 2.4 Gigahertz also puts the radio control out of the frequency range of any 'noise' caed by the other electronic components on your helicopter - such as the motor, speed controller and any metal to metal noise - eliminating interference and glitching that can affect traditional frequency system. Fourth, another main characteristic of 2.4 Gigahertz equipment from a RC model club?s point of view is that no frequency control is needed. Eliminating the need to check everyone else's channel numbers, prior to flying. No more worries about turning up at a club with the wrong crystal in your Tx. The Exceed-RC 450PE RTF Helicopter uses a combination of tough, lightweight aluminum and updated composite parts and is designed and equipped to be capable of the most extreme 3D maneuvers . And since it's 95% assembled, you can have it flying in just a few hours. We are also proud to offer this magnificent model as 3D capable right out of the box. Combining the knowledge of RC nitro collective precision along with the most advanced micro electric design concepts, we have arrived at a model that excels prepared to wipe out the competition. The Exceed-RC 450PE Helicopter offers collective pitch control that will let helicopter pilots to fly in almost any direction. Transitioning from forward flight to hover with smooth, solid control is a cinch and negative pitch is a breeze for aerobatics like loops and rolls. The installed mixing board controls mixing of the main and tail rotors. The board also contains spe |
|
|
The New 3 Channel Micro Palm Sized RC Indoor Infared Helicopter $79.95 The 28027 3Ch Mini RC Helicopter is one of the smallest and lightest 3 channel helicopter out there. This helicopter is designed for indoor flight only. The double rotor design helps stabilize flight and makes it easier to control. This model is the smallest and easiest to control 3 channel on the market. Control right from your hands to any room around 10 meters and with the long lasting Lipo Battery that last up to 7 minutes of flight time. Feature: - Made with ABS, Nylon Material for strong durability - Safeguard battery model to prolong the battery life;- Micro sized helicopter design looks nice and cute. Specification: -Infrared controlled 3ch r/c helicopter; - Function: go up and down, go forward and backward, turn left and right; - Battery for helicopter: 3.7V-85mAh li-po battery (included); - Battery for transmitter: 6pcs AA battery (not included); - Rechargeable by transmitter; - Charging time: 30 minutes; - Remote distance: 10 meters; - Flying time: about 7 minutes; Package Include: - 3 CH Mini Helicopter - 3-CH Radio Controller - Extra Tail Blade - Instruction Manual |
|
|
36G High Quality Esky RC Servo $29.95 [Specification:] (1) Speed: 0.22s/60° (2) Torque: 3.2KG/CM (3) Weight: 36.0g (4) Dimension: 40.4 x 19.8 x 36mm (5) Certificate: CE,FCC,RoHS (6) Color:black (7) Wire length:280mm (8) Wire color:white,red,black [Products explain:] Fast speed servo which is made with a heavy duty servo case in our company has been instead of the formal servo, with this fast speed servo you can use it for helicopter, airplane glider and so on. Model Size (L*W*H) Weight 4.8V -6.0V Speed Torque mm/in g oz (sec/60°) kg.cm oz.in EK2-0501 40.4*19.8*36 36 1.27 0.22sec/60°(4.8v) 3.2(4.8v |
|
|
The New 2009 Model 4 Channel Warbird F4U Corsair RTF RC Ready to Fly Electric Airplane $84.95 4 Channel Full Function Radio Controlled (Aileron,Elevator,Rudder,Throttle) Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible Constructed with Super Tough, lightweight EPO material! Perfect appearance and emulation (Scale appearance, great attention has been given to details) True Classic Trainer of All Time! Decorative Waterslide Decals! Easy to Build & Endless Fun to Fly! Perfect Low-Wing Trainer! Rudder helps steer plane on ground on its scale landing gear for easy take off Ready to Fly in Just Minutes! Shock Resistant Reinforced fuselage and Strong Wings Can Take Off From Ground or Hand Launched Ground Take-Off can be performed easily Huge Wing size, Excellent Flight Performance Super easy and super stable electric powered scale R/C park flyer for beginner or middle-level users Stable inverted flight fuselage with pre-installed Electronics, Motor, Servos, and Speed Controller Super stable for beginner, Super low speed for safety, Super low altitude for fun Fabricated by accurate molds with high fidelity of real airplane Powerful 370 motor with expert-designed propellers and hi-capacity Ni-MH battery pack Excellent stability and aerobatic capability Detailed Body Structure High roll rate Digital Proportional Motor Speed Control Super low speed for safety, Super low altitude for fun Crash Resistant Construction Easy to Fly, Easy to Control, Super stable for beginner Slow Speed Flying Capable, Good for Beginner Suitable for both beginners and experienced pilots Wingspan: 840mm (33") Length: 750mm (29.5") Flying Weight: 420g (14.8 oz) Drive System: 370 carbon brushed motor Servo: 3X 9g high speed micro servos ESC: 20A speed controller Battery: 9.6V 650mah Ni-MH Control system: 4 CH Multifunctional Radio Transmitter and Receiver Radio Control Range: 1000 feet (300m) Airplane (90% assembled) 4 Channel Multifunctional Radio Transmitter Wall Battery Charger High Quality Rechargeable 9.6V 650mah Ni-MH Battery English Manual 4 Propellers |
|
|
The New 2009 Model 4 Channel Warbird F4U Corsair RTF RC Ready to Fly Electric Airplane Gray Version $84.95 4 Channel Full Function Radio Controlled (Aileron,Elevator,Rudder,Throttle) Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible Constructed with Super Tough, lightweight EPO material! Perfect appearance and emulation (Scale appearance, great attention has been given to details) True Classic Trainer of All Time! Decorative Waterslide Decals! Easy to Build & Endless Fun to Fly! Perfect Low-Wing Trainer! Rudder helps steer plane on ground on its scale landing gear for easy take off Ready to Fly in Just Minutes! Shock Resistant Reinforced fuselage and Strong Wings Can Take Off From Ground or Hand Launched Ground Take-Off can be performed easily Huge Wing size, Excellent Flight Performance Super easy and super stable electric powered scale R/C park flyer for beginner or middle-level users Stable inverted flight fuselage with pre-installed Electronics, Motor, Servos, and Speed Controller Super stable for beginner, Super low speed for safety, Super low altitude for fun Fabricated by accurate molds with high fidelity of real airplane Powerful 370 motor with expert-designed propellers and hi-capacity Ni-MH battery pack Excellent stability and aerobatic capability Detailed Body Structure High roll rate Digital Proportional Motor Speed Control Super low speed for safety, Super low altitude for fun Crash Resistant Construction Easy to Fly, Easy to Control, Super stable for beginner Slow Speed Flying Capable, Good for Beginner Suitable for both beginners and experienced pilots Wingspan: 840mm (33") Length: 750mm (29.5") Flying Weight: 420g (14.8 oz) Drive System: 370 carbon brushed motor Servo: 3X 9g high speed micro servos ESC: 20A speed controller Battery: 9.6V 650mah Ni-MH Control system: 4 CH Multifunctional Radio Transmitter and Receiver Radio Control Range: 1000 feet (300m) Airplane (90% assembled) 4 Channel Multifunctional Radio Transmitter Wall Battery Charger High Quality Rechargeable 9.6V 650mah Ni-MH Battery English Manual Screw Driver |
|
|
4-Channel Electric Powered AT-6 Texan (Silver) RC Airplane Model Kit (Unassembled) $49.95 Features: 4 Channel Remote Control Airplane Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible Constructed with Super Tough, lightweight EPO material! Perfect appearance and emulation (Scale appearance, great attention has been given to details) True Classic Trainer of All Time! Decorative Waterslide Decals! Easy to Build & Endless Fun to Fly! Perfect Low-Wing Trainer! Rudder helps steer plane on ground on its scale landing gear for easy take off Shock Resistant Reinforced fuselage and Strong Wings Can Take Off From Ground or Hand Launched Ground Take-Off can be performed easily Huge Wing size, Excellent Flight Performance Super easy and super stable electric powered scale R/C park flyer for beginner or middle-level users Stable inverted flight Super stable for beginner, Super low speed for safety, Super low altitude for fun Fabricated by accurate molds with high fidelity of real airplane Excellent stability and aerobatic capability Detailed Body Structure High roll rate Super low speed for safety, Super low altitude for fun Crash Resistant Construction Easy to Fly, Easy to Control, Super stable for beginner Slow Speed Flying Capable, Good for Beginner Suitable for both beginners and experienced pilots Specifications: Wingspan: 900mm (35.4") Length: 680mm (26.7") Flying Weight: 480g (16.9 oz) Requirements: Drive System: 370 carbon brushed motor Servo: 3X 9g high speed micro servos ESC: 20A speed controller Battery: 9.6V 650mah Ni-MH Control system: 4 CH Multifunctional Radio Transmitter and Receiver Included: Airplane Kit Unassembled Screw Driver 4 Propellers English Manual |
|
|
2.4Ghz Exceed RC 4-Channel Dual Rotor Chinook 47 Remote Control Tandem Helicopter 100% RTF - Red $499.95 The Exceed RC Chinook is a cool looking tandem rotor semi-scale RC helicopter designed to give absolute newcomers and sport pilots great RC model helicopter flying! Up until now, tandem rotor helicopters were considered hugely expensive and difficult to fly so were strictly for experts. Amazingly the Exceed RC Chinook is super easy to hover than normal helicopters - the two coaxial rotor systems working together has to be flown to be believed! The Chinook is sturdy and full of features to improve survivability! When you do crash we will have spares to get you back in the air. Remember that model helicopters are demanding to fly and you will need to train carefully. \ 1).All-up Weight: 768g (Battery included) 2).Main Rotor Dia. B: 450mm 3).Main Rotor Dia. A: 450mm 4).Overall Length: 575mm 5).Battery: 7.4V 2200mAh Li-Po 6).Receiver: RX-2409 7).Drive System: 4 X 370SH 8).Transmitter: WK-2401 9).Servo: WK-7.6-3 weight 8.5g;speed 0.11sec/60o(4.8V); torque 0.9kg.cm(4.8V); dimension 22.5X11.5X24mm Features 1). Highly emulational shape with the-state-of-the-art workmanship. 2). New 2.4G technology, with the functions of automatic identification and precise code pairing, can allow above 20 aircrafts to fly in the same field and same time. 3). It utilizes the 2.4G 3-in-1 receiving circuit with the functions of servo extent adjustment and built-in gyro sensitivity adjustment. 4). High performance 4 * 370SH motor powered by 7.4V 2200mAh Lipo offers 10 minute flight time, depending on the flight modes. |
|
|
Exceed RC 2.4GHz Blue Ray 450 SE RTF 3D Helicopter 100% Ready to Fly w/ Brushless Motor, ESC, Lipo Battery $499.95 The Exceed RC 2.4GHz 450 SE RTF is a fully loaded version 2.4GHz 3D RC helicopter, 100% built, Ready-to-Fly! Light and fast, this new machine from Exceed RC has everything you ever wanted. The 2.4 GHz 450 SE RTF Helicopter is an advanced RC helicopter designed with the most updated current technology available and produced with the highest quality. While most parts are compatible with the world's most popular 450 size electric helicopter such as the T-REX450, the Exceed RC 2.4 GHz 450 SE RTF is designed with the best features available while eliminating all the weak points from the current T-REX SE. All the hardware is high A-Grade with all hex screws supplied and high quality Germany-imported bearings. What is 2.4Ghz Technology? New 2.4G Spread Spectrum technology allows the transmitter and receiver to be 'locked-on' to the same frequency ensuring much improved reliability and peace of mind when flying. Second, 2.4 Gigahertz systems offers quicker, more responsive control, when compared to a standard frequency system. Third, Operating at 2.4 Gigahertz also puts the radio control out of the frequency range of any 'noise' caed by the other electronic components on your helicopter - such as the motor, speed controller and any metal to metal noise - eliminating interference and glitching that can affect traditional frequency system. Fourth, another main characteristic of 2.4 Gigahertz equipment from a RC model club?s point of view is that no frequency control is needed. Eliminating the need to check everyone else's channel numbers, prior to flying. No more worries about turning up at a club with the wrong crystal in your Tx. The Exceed-RC 2.4GHz SE RTF uses a combination of tough, lightweight aluminum and updated composite parts and is designed and equipped to be capable of the most extreme 3D maneuvers . And since it's 95% assembled, you can have it flying in just a few hours. We are also proud to offer this magnificent model as 3D capable right out of the box. Combining the knowledge of RC nitro collective precision along with the most advanced micro electric design concepts, we have arrived at a model that excels prepared to wipe out the competition. The Exceed-RC 2.4GHz SE RTF offers collective pitch control that will let helicopter pilots to fly in almost any direction. Transitioning from forward flight to hover with smooth, solid control is a cinch and negative pitch is a breeze for aerobatics like loops and rolls. The installed mixing board controls mixing of the main and tail rotors. The board also contains speed controls, a external gyro for tail stabilizing and a BEC circuit that supplies power to the receiver and servos Expect only the best as you experience tight, precise control and quick response as the Exceed-RC 2.4GHz SE RTF will |
|
|
Walkera 4G3 Micro Metal 3D Aerobatic Brushless CNC RC Helicopter w/ 2801 2.4GHz RC Transmitter $799.95 Walkera 4G3 V2 2.4Ghz Metal Upgrade with WK-2801 8CH Transmitter Edition Helicopter WK-2801 is completely compatibile with 4CH, 6CH, 7CH (Channel) 2.4GHz Products of walkera series. That means you can use WK-2801 for all walkera 2.4GHz Helicopters. Specification Main Rotor Dia.: 302mm Tail Rotor Dia.: 58mm Overall Length: 273mm All-up Weight: 68.4g (Battery included) Main Motor: 1225FE33 Tail Motor: 0716R Battery: 3.7V 400mAh Li-Po Transmitter: WK-2801 Receiver: RX-2605 Servo: wk-02-1 / weight 3.18g / speed 0.12sec/60°(3.0~4.5V) / torque 0.12kgf/cm / dimension 19.2*8.3*19.7mm Gyro: Built-in Features: Ultra mini indoor 3D mode broke the concept of space limitation. Super mini but super precision. Small size helicopter but with full functions of big one. The latest single-cell LiPo technology is CREATIVELY used in this size helicopter in the world. It features friendly environment and energy-saving concept. Equipped with high performance motor, the flight time will be up to 7 to 8 minutes at 3.7V 400mAh LiPo battery pack, depending on your flight mode. WK-2801 Specification: Encoder: 8 channel micro computer system Frequency: 2.4G spread spectrum Output Power: ≤10Mw Current Drain: ≤120mA Power: 1.2VX8 NiCard (9.6V600mAh) or 1.5VX8 AA dry batteries WK-2801 Features: The WK-2801 adopts 2.4Gig spectrum technology and features automatic code pairing and ID assignment. LCD display of the WK-2801 is simple to understand and easy to set. The transmitter case is ergonomically designed and the large LCD display has white backlight with easy-to-read graphics. The length or tension of the controls stick can be adjusted and it is convenient to change the throttle from left to right. The WK-2801 supports both helicopters and airplanes. It offers three helicopter flight modes and each flight mode is capable of free setting and adjusting parameter in order to suit the various requirements of F3C or 3D aerobatic flights. Capable of wireless data copy and transfer between two transmitters. Four Adjustable hot keys facilitate easy entry into the set menu. Eight model memory storage. Gyro rate adjustment by transmitter, and convenient programmed hover and 3D flights. |
|
|
RC Airplane Scale Pilot Model #1 $19.95 This pre-painted scale model pilot is design for arf rc planes. It is made out of light plastic material. |
|
|
2.4Ghz BlueRay 450PE Electric RC Helicopter * Fully Loaded 100% Ready to Fly w/ CNC Upgrades/Brushless Motor/ESC/Gyro/LiPo Battery/Carbon Fiber Blades & Fiber G $799.95 "The MOST AWESOME 3D Radio Controlled Helicopter! FULLY-LOADED 2.4GHz" The BlueRay 450PE a fully loaded version 2.4GHz PREMIUM EDITION CCPM 3D RC helicopter, 100% built, Ready-to-Fly! Light and fast, this new machine from Exceed RC has everything you ever wanted. The BlueRay 450 Premium Edition Helicopter is an advanced rc helicopter designed with the most updated current technology available and produced with the highest quality CNC machining. While most parts are compatible with the world's most popular 450 size electric helicopter such as the T-REX450, the BlueRay450 PE is designed with the best features available while eliminating all the weak points from the current T-REX SE. All the hardware is high A-Grade with all hex screws supplied and high quality Germany-imported bearings. What is 2.4Ghz Technology? New 2.4G Spread Spectrum technology allows the transmitter and receiver to be 'locked-on' to the same frequency ensuring much improved reliability and peace of mind when flying. Second, 2.4 Gigahertz systems offers quicker, more responsive control, when compared to a standard frequency system. Third, Operating at 2.4 Gigahertz also puts the radio control out of the frequency range of any 'noise' caed by the other electronic components on your helicopter - such as the motor, speed controller and any metal to metal noise - eliminating interference and glitching that can affect traditional frequency system. Fourth, another main characteristic of 2.4 Gigahertz equipment from a RC model club?s point of view is that no frequency control is needed. Eliminating the need to check everyone else's channel numbers, prior to flying. No more worries about turning up at a club with the wrong crystal in your Tx. The Exceed-RC BlueRay 450PE uses a combination of tough, lightweight aluminum and updated composite parts and is designed and equipped to be capable of the most extreme 3D maneuvers . And since it's 95% assembled, you can have it flying in just a few hours. We are also proud to offer this magnificent model as 3D capable right out of the box. Combining the knowledge of RC nitro collective precision along with the most advanced micro electric design concepts, we have arrived at a model that excels prepared to wipe out the competition. The Exceed-RC BlueRay 450PE offers collective pitch control that will let helicopter pilots to fly in almost any direction. Transitioning from forward flight to hover with smooth, solid control is a cinch and negative pitch is a breeze for aerobatics like loops and rolls. The installed mixing board controls mixing of the main and tail rotors. The board also contains spee |
|
|
T-28 Trojan - 55" EP-Powered RC Warbird Plane ARF $334.95 T-28 Trojan ARF EP Radio Controlled Warbird Plane The Flying Dream T-28 Trojan comes in a very scale finish and a nicely shaped outline as if you were looking at the real thing. The model consists of a HIP (polystrene) fuselage which is strong and durable, spray painted to a very high standard. Main wings and the tails are balsa-made, factory covered under the new printed-on covering film. All the small details are printed on the film to enhance realistic feelings and it makes the plane a great choice for the scale enthusiasts. The T-28 Trojan is also a scale warbird of outstanding performance. Its large degree of hihedral allows a stable control of the plane and this results in a very smooth flying which you would expect from a Trojan! Wingspan 1400mm Length 1130mm Weight 2300-2400g Wing Loading 71~74 dm/2 Airfoil Naca~0014 Wing Area 32.5 dm/2 Radio Control 4 Ch 4 Servos purchase separately Motors A3520/6~A4120/7 purchase separately ESC 20A~30A purchase separately The well-known T-28 Trojan is presented in a highly visible classic color scheme with good contrasts to make orientation easier during flight. The attractive ready applied decals on the painted fuselage add to the scale look of the model and are protected by a clear-coat for more durable use. The model comes with a 10 wheel, realistic undercarriage giving an extremely steady and straight tracking take off and landing roll. An easily accessed and neat compartment for the battery is featured to help ultra fast installation The fairly close coupled motors make a good choice for your first single engined scale warbird. An ideal fun aircraft for scale enthusiasts. |
|
|
Military EDF Predator UCAV 101mm Electric Ducted Fan RC Airplane $319 The EDF Predator UCAV from Nitro Planes is a large fiberglass jet model with sheeted wings. It comes complete with landing gear, fiberglass canopy, missiles, and all hardware. The model can be powered by a 90mm to 101mm ( 3.5" to 4" ) EDF unit. EDF Predator UCAV 101mm Electric Ducted Fan Airplane Top Features Top quality wood construction with fiberglass fuselage Comes with all hardware and accessories Specifications Wing Span: 47.2 in / 1200mm Wing Area : 521 sq in / 33.8 sq dm Flying Weight : 6.6 lb / 3000 g Fuselage Length : 58.7 / 1490 mm Electronics Required : 4 Channels Radio Transmitter 5 Servos EDF : 101 mm / 4 in Brushless Motor : D36 x L 36 mm 2000 KV Speed Controller : 22.2 V ; 85A Li-poly Battery : 4000 mAh 25 C 22.2 V Click here for UCAV Review/Build Thread The fuselage and parts come well secured in the custom box. All the parts are covered in plastic or bagged. The control surfaces arrive attached with hinge material but need to be CA'ed in place after alignment. The fiberglass canopy is pre-finished and only needs the latch mechanism attached. The landing gear are fixed with a steerable nose wheel assembly. Two sheets of finishing decals are supplied and the 7-page manual, although sparse, provides sufficient photos and text to complete the model by an experienced assembler. Photos A closer look at the fuselage reveals the size, quality finish, construction techniques, and high level of pre-assembly. The T-nuts are already installed, and glued in place, for the gear mains and steerable nose wheel assembly. The battery and servo trays are also pre-installed. Photos Click here for UCAV Review/Build Thread |
|
|
|
Willys Jeep Truck Super Hurricane L6 50s
June 26th, 2005 in
RC Airplanes