Model Airplane Gas Engines

Model Airplane gas engines

What is an airship (part 2)?

An airship looks like a simple air balloon. Most people believe it works the same over the performance of an air balloon. However, the operation of an airship is a bit complex and it uses a lot of things like an envelope, laths nose cone, balloon back, the balloon before the curtain of the catenary, engines, suspension cables, flight control surfaces, elevators, air valves, air intakes, helium valve, and a car. Some of these technical terms are explained in Part 1 of this section. Other terms are explained below.

Motors

In most airships, two motors are used to move forward. These engines are exactly like those used in airplanes, running on gasoline. In addition, these engines are so powerful, they need fans to cool them. They have the ability to generate thousands of horses, according to the design of the airship. The engines are located on both sides cableway. In the first models of airships, the engines were not used. However, by installing engines airships modern now can fly more speed (30 to 70 mph)

Windsocks

Air Scoops are used to remove air propellers, which are then used in a dirigible balloon. electric fans blow air to the propeller cuffs. The Air Scoops are controlled by pilots using the valves.

Air Valves

Air valves are located inside of a dirigible balloon. Normally, four valves (two front, two rear) are used for ventilation air balloon.

Helium Valve

Helium is used in airships for lifting end. A quantity is managed by pilots in the envelope to keep the reader an airship. The role of the helium valve is to add or remove helium gas envelope an airship. In addition, the helium gas pressure is maintained using these valves, which is done by changing the amount of air in the balloon.

Gondola

Gondola is one of the most important parts of an airship. It is where the passengers are held. The ability to vary the lift of a dirigible airship. It usually consists of two seats for pilots and 12 seats for passengers (Total 14 seats). Modern gondolas are designed with additional functions, including temperature controls - which have the ability to control the temperature inside the car so that passengers can feel more at ease. Cameras are also installed in the car of an airship. It also includes control panels that are controlled by pilots for such things as:

• Propeller control (to regulate and monitor the speed)

• Heat mixture fuel / (fuel mix)

• controls the pressure of the envelope (helium pressure controls)

• flight surface controls (left, right, up, downward movement)

• communication equipment (Used to contact the support team and ground controllers traffic.

About the Author

Located in New York, Arnold Aerial Advertising provides aerial advertising services nationwide with affordable rates. Michael Arnold is the Director of Arnold Aerial Advertising Inc. They conduct all forms of Aerial Advertising including Blimp Advertising. They fly the Beaches, All Sporting Events, Concerts, Rush Hour Traffic. They are the only agency that provides all of the methods of aerial advertising- blimps, aerial banner flying, and skywriting.

_________________________________________________________________________________

Rutan 74 Deflant Yellow ARF Twin Engine Nitro Gas Radio Remote Controlled Airplane $499 The Rutan Model 74 Defiant is a ARF Nitro Gas twin-engine aircraft with the engines in a push-pull configuration.  An aircraft constructed with a push-pull configuration has a mixture of forward-mounted (tractor) propellers and backward-mounted (pusher) propellers.  The advantage that an push-pull configuration provides is the ability to mount two propellers on the aircraft's centreline, thereby avoiding the increased drag that comes with twin wing-mounted engines. It is also easier to fly if one of the two engines fails, as the thrust provided by the remaining engine is symmetrical, unlike a conventional twin-engine aircraft, which will yaw in the direction of the failed engine, and becomes uncontrollable below a certain airspeed, known as Vmc, which varies based on the type of aircraft Wingspan 65 in  1650mm Fuselage Length : 51 in / 1300mm Flying Weight 7.9 lb / 3600g n/a n/a Wing Area 924 sq in / 60 sq dm Radio Required: 4Channels 7servos (Purchase Separately) Engine Required 2 c 0.40 cu in x2 (Purchase Separately)

CMP Zero Fighter 50cc - 80" ARF Nitro Gas Radio Remote Controlled RC Airplane New! $799.95 The Mitsubshi A6M5 52 with wingspan of 2100mm is the biggest brother from the CMPro Japanese Fighter Series. This model, well designed for 40~50cc gas engines, features a fiberglass molded fuselage and painted wing panels. The attention to detail results in an extremely realistic model that flies as look as it looks.     Wingspan 2100mm Length 1700mm Weight 6.2~6.5 kg Wing Loading 77~81 dm/2 Airfoil Naca 2415 Wing Area 80 dm/2 Radio Control 5~6 Ch 8~9 Servos purchase separately 2 Strok Engine 40~50 purchase separately The whole aircraft is painted in a matt finish which greatly enhances its scale features. A fixed undercarriage is included while optional retracts fitting is also available. Decals come ready applied and clear coated ? that doesn?t only make the kit more durable but shortens building time as well. A carbon fiber wing tube is included with kit.  

T-34 MENTOR 60 Almost Ready To Fly (ARF) Gas Rc Airplane $349.99 T-34 MENTOR 60 Almost-Ready-To-Fly Nitro Gas RC Airplane! This airplane is huge. All you need is an engine and a radio. Engine and Radio are not included Features Semi-scale aerobatics trainer Top quality balsa and plywood construction Covered with iron-on covering film Built-up wing and two pre-painted pilot figures Special races have been organized based on this model Perfect for beginners who have graduated from shoulder wing trainer Comes with all hardware and accessories Specifications Wing Span: 65.2 in / 1650 mm Wing Area: 769 sq in / 49.6 sq dm Flying Weight: 7.9 lbs / 3600 g Fuselage Length: 54.0 in / 1370 mm Engine Required: 2c 0.60 cu in 4c 0.91 cu in Radio Required: 5 channels, 6 servos

Gas Rc Airplane Trainer $199.99 Brand New, Almost-Ready-To-Fly Nitro Gas R/C Airplane !!! The most popular Nitro Trainer 20 Airplane. Engine and Radio are not included Features Scale aerobatics models airplane Top quality balsa and plywood construction Covered with iron-on covering film 3D transparent template to assist engine installation Comes with all hardware and accessories Specifications Wing Span: 52.0 in / 1320 mm Wing Area: 446 sq in / 28.8 sq dm Flying Weight: 3.5 lbs / 1600 g Fuselage Length: 38.6 in / 980 mm Engine Required: 2c 0.25 cu in Radio Required: 4 channels, 4 servos

DeHavilland Mosquito Twin 25~32 - 73" Engine Powered Radio Remote Controlled Nitro Gas Scale Airplane ARF $489 CMP DeHavviland Mosquito 25~32 - 73" Nitro Gas Radio Remote Controlled Twin Engine Scale RC Warbird Airplane.  The 73" Mosquito ARF is a great scale airplane for anyone who likes scale flying. The kit includes a fiberglass fuselage, center section, and cowling done in matching paint. The wings are sheeted foam, covered with solartex, painted to match. All control surfaces have beveled leading edges and the control horn mounts are preinstalled. The kit includes full color decals.   The kit box is large, with all the major parts well packed in a light foam wrap and clear plastic bags. Slots in the interior cardboard held all items tightly in place, producing a sample of this product for review that will produce no damage from shipping.  Included with the kit are 8-ounce fuel tanks, engine mounts, wheels, hardware, pushrods, clear plastic canopy and nose cone, decal sheet, one-piece fiberglass cowls, and fixed wire landing gear. You will need to purchase some building supplies, engines, spinners, servo extensions, and a radio. Mechanical retracts are an interesting option to consider.  The quality of the materials is excellent with a one-piece fiberglass fuselage/fin straight and true. The 11-page instruction manual has excellent-quality step-by-step drawings. Pluses: ? Well engineered?all parts fit together nicely. ? Handsome painted finish and full-color decal sheet. Details and Recommendations: Type: Semiscale ARF Pilot Skill Level: Intermediate Wingspan: 73 inches Wing area: 1,286.5 square inches Length: 52.5 inches Weight: 11-11.5 pounds Wing loading: 20.6 ounces per square inch Engine: .25-.32 (two-stroke) or .26-.30 (four-stroke) Radio: Five- to six-channel transmitter, seven to nine servos (rudder, elevator, flaps, one for each aileron, one for each throttle, one for each optional retract) Construction: Molded fiberglass fuselage, tail sections, wing center-section, and engine nacelles with light-plywood support, balsa-and-plywood wing panels and sections Covering/finish: Three-color flat-finished camouflage paint over fiberglass, film covered wings and tail Options: Retractable landing gear (Not Included) Construction: Model assembly begins with attaching the ailerons to the wings using cloth-style hinges provided in the kit. The engine nacelle splits the flaps on each wing panel, which are connected with a U-shaped joiner wire. The flaps are attached after the wing sections are joined, to make their alignment easier to match.             The wing is composed of a center-section and two outer panels. The outer panels and control surfaces are built-up wooden structures, and the center-section is a fiberglass shell with a plywood skeleton.             Two aluminum tubes?measuring 87/16 inches in length and 3/4 inch in diameter?insta

DeHavilland Mosquito Twin Engine 25~32 - 73" Nitro Powered Radio Remote Controlled Nitro Gas Scale Airplane ARF $499 Many of this model’s attributes attracted me to it, including the sweet sound of twin engines, extreme good looks, reputation for speed, scale outline, ease of assembly, and competitive price. This is one of those models I just had to begin as soon as I got it, and I’m sure it will have the same effect on you. The  Mosquito is a top-quality ARF that ought to be on your buy list. You will not be disappointed and you will be the envy at your flying field. The 73" Mosquito ARF is a great scale airplane for anyone who likes scale flying.  The kit includes a fiberglass fuselage, center section, and cowling done in matching paint.  The wings are sheeted foam, covered with solartex, and painted to match.  All control surfaces have beveled leading edges and the control horn mounts are preinstalled.  The kit includes full color decals.  Wing Span: 73"Weight: 11.01lbLength: 52.5"Wing Loading: 30.92oz./sq.ft.Wing Area: 821.5sq.inEngine Required: (2) 2c 25~32, 4c 26~30Radio 5~6 Channel 7~9 Servos Out of the box: As all CMP this kit comes with all parts nicely wrapped in thin foam and plastic bags. Wing is 3 piece design, outer panels are all wood, sheeted rib design. Center section is combination of laser-cut wood ribs and fiberglass shell making it very strong base for twin engine and landing gear mounting. Ailerons and flaps are hinged and installed. Tail section is air foiled surfaces hinged and ready. Fuselage is very strong with servo tray installed for you. Beautiful fiberglass cowls and engine hatches, painted PVC canopy and fairings. Wheels, gas tank, motor mount compliments complete hardware package. Kit comes with fixed gear option, mechanical retracts can be installed and wing is designed for it. Decal sheet is included to finish the models look. Due to twin engine set-up, experience is required to assemble and fly this Warbird. One of the reasons you looked at this models is its history and unique appearance. Sound of twin engine and scale looks is what this is all about. Get one today and fly after short assembly period. You will love the attention this plane will get!     Details Type: Semiscale ARF Pilot Skill Level: IntermediateWingspan: 73 inches Wing area: 1,286.5 square inches Length: 52.5 inches Weight: 11-11.5 pounds Wing loading: 20.6 ounces per square inch Engine: .25-.32 (two-stroke) or .26-.30 (four-stroke) Radio: Five- to six-channel transmitter, seven to nine servos (rudder, elevator, flaps, one for each aileron, one for each throttle, one for each optional retract) Construction: Molded fiberglass fuselage, tail sections, wing center-section, and engine nacelles with light-plywood support, balsa-and-plywood wing panels and sections Covering/finish: Three-color flat-finished camouflage paint over fiberglass, film covered wings and tail Options: R

Super Sale! CMP Model P40 Warhawk 140 - 73 " ARF Nitro Gas Radio Remote Controlled "Tiger Shark" Airplane RC Plane $499 This is so far our highest quality arf plane kit, well priced and almost-ready-to-fly!  The P40 Warhawk has a fiberglass fuselage and cowl painted in vague colors. The rib wings are covered with Solartex and airbrushed to match the color of the whole aircraft. The wood that makes up both the wings and the fuselage are all laser cut. The high precision of fiberglass and fine painting work make this kit an extremely realistic aircraft. It is a perfect combination between scale looks and excellent flying performance. The kit comes with a full color decal sheet, wheels and a fuel tank. This war bird is a must fly! Wingspan 1850mm Length 1570mm Weight 4.88~4.95 kg Wing Loading 81~83 dm/2 Airfoil Naca 0014 Wing Area 60 dm/2 Radio Control 4~5 Ch 5~6 Servos purchase separately 2 Strok Engine 108~120 purchase separately 4 Strok Engine 140 purchase separately *RETRACT NOTE* The retract bays are built into the wing from the factory, so the retracts will drop right in. Wing Span: 73" Weight: 10.75lb Length: 62" Wing Area: 930sq.in Wing Loading: 26.64oz./sq.ft. Engine Required: 4c 140 Radio 4~5 Channel 5~6 Servos The kit box is nice packed, with all the major parts well packed in a light foam wrap and clear plastic bags. Slots in the interior cardboard held all items tightly in place, so it will produce no damage from shipping.  Included with the kit are fuel tanks, engine mounts, wheels, hardware, pushrods, clear plastic canopy and nose cone, decal sheet, one-piece fiberglass cowls, and fixed wire landing gear plus other necessary hardware. You will need to purchase some building supplies, engines, spinners, servo extensions, and a radio. Mechanical retracts are an interesting option to consider for this plane kit.  The quality of the materials is excellent with a one-piece fiberglass fuselage/fin straight and true. The  instruction manual has excellent-quality step-by-step drawings.  With an 4-stroke engine installed, this P40 Plane will fly, feel, and sound like the legendary Tiger Shark from World War 2. This fierce P-40 Warhawk comes with quality hardware including the spinner. *Propeller to be purchased separately*         Decals are ready applied and protected by clear coat. The model is thus very durable and easy to build.   The kit comes with fixed landing gear and optional twist and turn retracts fitting. &n

New NitroModels CMP F4U Corsair 50 - 58" Nitro Gas Radio Remote Controlled Almost-Ready to Fly RC Airplane Warbird Plane $329 As all NitroModels CMP this F4U Corsair 50 ARF NITRO Gas Plane kit comes with all parts nicely wrapped in thin foam and plastic bags. The kit box is truly nice packed, with all the major parts well packed in a light foam wrap and clear plastic bags. All balsa wood rib wing, nicely covered, rivets decals already applied, ailerons hinged and installed. Horizontal, elevators and rudder also all wood, air foiled surfaces, hinged and ready. Drop tank included and assembled.  Slots in the interior cardboard held all items tightly in place, so it will minimize damage from shipping.  Included with the kit are fuel tanks, engine mounts, wheels, hardware, pushrods, clear plastic canopy and nose cone, decal sheet, one-piece fiberglass cowls, and fixed wire landing gear plus other necessary hardware. You will need to purchase some building supplies, engines, spinners, servo extensions, and a radio. This plane is retract-ready so mechanical retracts are an interesting option to consider for this plane kit.  The quality of the materials is excellent with a one-piece fiberglass fuselage/fin straight and true. The  instruction manual has excellent-quality step-by-step drawings.  With an 4-stroke engine installed, this F4U Corsair plane will fly, feel, and sound like the legendary fighter jet from World War 2. The F4U Corsair 50 ARF features a fiberglass moulded fuselage and balsa ribbed wings. The whole model is matt spray paint finished with decals already applied. Wing panels are made of quality balsa wood to result a light model. This kit will not fail to impress in the air or on the ground. The F4U Corsair features a fiberglass fuselage and painted wing. The high precision fiberglass construction and the whole ?matt? look make this kit an extremely realistic model. The kit also comes with a professionally painted fiberglass cowl and a fixed undercarriage, with optional rotating retracts fitting. The CMPro Corsair is an ideal choice for those who are looking for a scale warbird with outstanding flying performance. Wingspan 1480mm Length 1100mm Weight 27.5~28.5 kg Wing Loading 63~69 dm/2 Airfoil Naca 2415 Wing Area 41 dm/2 Radio Control 4~5 Ch 5~6 Servos purchase separately 2 Strok Engine 40~50 purchase separately 4 Strok Engine 52~63 purchase separately *RETRACT NOTE* The retract bays are built into the&nbsp

New ARF! Red Ultimate BiPe 40 - 41.5" Nitro Gas Radio Control RC Airplane $319 This is the radio controlled, glow powered, almost ready to fly Ultimate Biplane .46 Scale RC Airplane. For Intermediate to Advanced Modeler/Flyers. Ultimate Biplane .46 ARF comes with its two wings completely assembled. No more gluing wing-spar pieces and aligning and gluing wing halves together. These wings, like the rest of the kit, are beautifully built, sanded and covered with polyester covering. The kit also comes with mounted cabane struts, a painted fiberglass cowl and molded wheel pants and hardware. New ARF! Ultimate BiPe 40 - 41.5" Nitro Gas Radio Control RC Airplane   Key Features : -Top quality balsa and plywood construction -Built-up wings symmetrical airfoil -All wood constructions with fiberglass parts -Trimmed and painted cowling by fuel proof paint -Hand iron-on color covering Comes with all hardware and accessories       Key Features : Top quality balsa and plywood construction Built-up wings symmetrical airfoil All wood constructions with fiberglass parts Trimmed and painted cowling by fuel proof paint Hand iron-on color covering Comes with all hardware and accessories Plane Specs: Wing span: 41.5in / 1100mm Wing area: 580 sq in / 37.5 sq dm Flying weight: 4.5lb / 2050g Fuselage length: 39.8 in / 1000 mm User Requirements: Engine Required: 2c 0.40 cu in  4c 0.52 cu in Radio Required: 4 channels,5 servos New ARF! Ultimate BiPe 40 - 41.5" Nitro Gas Radio Control RC Airplane   Clean, sharp lines Extremely agile Light, and flies great on engines in the lower end of the recommended size range Complete hardware package including Spinner, fuel tank, wheels, and fuel tubing Awesome aerobatics, very capable without being ?Twitchy? Takeoffs and landings are quite manageable Rolls, Snaps, Blenders, and other spinning maneuvers look spectacular       FEATURES: All Balsa and plywood constructions. CAD Laser cut ARF Kit.  

RC Model Airplane #6 $19.95 This pre-painted scale model pilot is design for arf rc planes. It is made out of light plastic material.

Giles 202 - 50 - 55" Nitro Gas Radio Remote Controlled RC Airplane Aerobatic Aircraft $200 Giles 202 - 50 - 55" Nitro Gas Radio Remote Controlled RC Airplane Aerobatic Aircraft The 50 sized Giles 202 features a stunning color scheme. The new & fresh style of colors breaks the traditional covering and makes this aircraft one of a kind. This kit features carbon fiber landing gear which is durable, light and strong. This kit also comes with a PVC canopy, 300cc fuel tank, 55mm wheels, pushrod and complete hardware. The fuselage and tail plane are molded in one-piece to strengthen the model and save weight. Only a few simple tasks and you can get this beauty in the air. Wing Span: 55.1" Length: 55.4" Weight: 5.62lb Wing Area: 564.2sq.in Wing Loading: 23.03oz./sq.ft. Engine Required: 2c .40-.46, 2c .50-.63 Radio: 4 Channel 5 Servos ****************NOTE*************** Engine, servos, transmitter, and other electronic items are sold separately! This is an airplane kit only, no electronics! Assembly required. Due to the United States Post Office's International shipping size limit, we can not ship this item outside of the United States, except Canada.

Yellow Twin Engine OV10 Bronco 15 - 48" Nitro Gas/Electric Radio Remote Controlled RC Airplane $199 New OV-10 Bronco Nitro Gas/Electric Radio Remote Controlled RC Airplane!  This ARF OV-10 Bronco supports both 2c 0.15 cu in engines or 400T Brushless Motor w/ 11.1V 1300-1600mAh. Electric Brushless/Nitro Gas OV-10 Bronco 15 - 48" Twin-Engine Radio Remote Controlled RC Airplane           The OV-10 Bronco was a multi-purpose, light attack aircraft acquired by the Marine Corp for observation squadrons to conduct visual reconnaissance missions. The OV-10A is a twin-turboprop short takeoff and landing aircraft conceived by the Marine Corps and developed under an Air Force, Navy, and Marine Corps tri-service program. The first production OV-10A was ordered in 1966 and its initial flight took place in August 1967. The OV-10 can be used for short take-offs and landings on aircraft carriers without the use of catapults. With the second seat removed, it can carry 3,200 pounds of cargo, five paratroopers or two litter patients and an attendant. Adding to its versatility is a rear fuselage compartment with a capacity of 3,200 pounds of cargo, five combat-equipped troops, or two litter patients and a medical attendant. The Bronco's mission capabilities include observation, forward air control, helicopter escort, armed reconnaissance, gunfire spotting, utility and limited ground attack; however, the USAF acquired the Bronco primarily as a forward air control (FAC) aircraft. The Bronco also provides transportation for aerial radiological reconnaissance, tactical air observers, artillery and naval gunfire spotting and airborne controllers of tactical air support operations. Other tasks include armed escort for helicopters and front line, low-level aerial photography. Wing span: 48 in / 1220mm Wing area: 434 sq in / 28 sq dm Flying weight: 4.4 lb / 2000g Fuselage length: 50 in / 1270 mm Engine Required: 2c 0.15 cu in X2 pcs Radio Required: 4-5channels,7-9 mini servos Li-Poly : 11.1V 1300-1600mAh x2 pcs Propeller:8x6 x2pcs Out runner Brushless Motor : 400T x2 pcs Speed Control :15 - 20 Amp x2 pcs

New J3 Piper Cub .60 - 71" Nitro Gas Radio Controlled Airplane ARF Kit $299.95 All wood, laser cut, fiber glass cowl, top quality ARF kit! One of the best J3 Piper Cub nitro-powered radio controlled model airplane. Specifications: Wing span:71 in/1800mm Fuselage Length: 46.5in /1180 mm Wing Area:653sq in/42sq dm Flying Weight:5.8lb/2650g Requirements: Radio Required:4 channels,5 servos Engine Required:2c 0.46-0.52cu in

NitroModels Zero Fighter 52 - 54" Scale Nitro Gas Radio Remote Control Warbird Airplane $99 Japan's Zero Fighter 50 Nitro Gas ARF Model RC Airplane The Mitsubishi A6M5 is a great scale airplane for anyone who likes scale flying. The kit includes a fiberglass fuselage and cowling. The wings are built with balsa material to form internal structure and covered. All covered surfaces are done in solartex cloth covering and then the whole airplane is airbrushed. All control surfaces have beveled leading edges and the control horn mounts are preinstalled. The wing is complete with CA hinges. The leading edge of the wing is pre-shaped. The kit includes full color decals.     Wing span: 54 in / 1380mm Wing area: 543 sq in / 35 sq dm Flying weight: 6.1lb / 2800g Fuselage length: 45 in / 1140 mm Engine Required: 2c 0.46 cu in Radio Required: 4 channels,5 servos 4c 0.63 cu in or 5 channels,6 servos Top quality wood construction with fiberglass fuselage Comes with all hardware and accessories   The Mitsubishi A6M was a light-weight naval fighter aircraft employed by the Japanese from 1940-45. More widely known by its Navy designation, Type 0 Carrier Fighter, or Zero, the plane gained a legendary reputation. A combination of excellent maneuverability and very long range made it one of the best fighters of its era.    The most effective Japanese fighter of World War II was known by many names. To the Imperial Japanese Navy, it was the Type 0 Carrier Fighter, Model 52. To the U.S. Navy pilots who fought it in the skies over the Pacific, it was the "Zeke." And to the American public it was known as the Zero. By whatever name, the Imperial Japanese Navy's Zero fighter was one of the most potent warplanes of World War II and probably the best all-around carrier-based fighter of the early 1940s. The Zero's outstanding performance stemmed primarily from the fact that it weighed only 5,500 to 6,500 pounds fully loaded. For this reason the Zero was extremely maneuverable and had a fast rate of climb. At the time of its appearance in 1940, the Zero fighter has a performance package superior to any other naval aircraft in the world. Speed, range, rate of climb, maneuverability and the ability to operate from aircraft carrier decks combined to forge a seemingly invincible weapon in the hands of the Japanese Navy. In the six months after Pearl Harbor, the Sentais (fighter Groups) equipped with the A6M so dominated the sky that the Imperial Forces had conquered over 12 million square miles. Over 10,000 Rei-sen (Zero) fighters were produced by the Japanese, and it is interesting to note that that the Zero weighted only 50% of the Corsair, one of the reasons being the lack of armor plate protection for

New English Blue J-3 Piper Cub 60 - 71" Nitro Gas Radio Remote Control Airplane Almost-Ready-to-Fly ARF $249 Super J-3 Piper Cub 60 - 71" ARF Scale Nitro Gas Radio Remote Control Airplane! A favorite with scale model builders, the Cub is now available with an unique "computer design and drawn" engineering, resulting in outstanding scale accuracy and easy kit assembly. This All-New Nitro Gas RC Super Cub ARF Blue J3 Piper Cub 60 makes for a perfect afternoon at the park! Made with lightweight, yet strong balsa construction, the stable flight characteristics make this a perfect airplane for the ARF fans, scale wing struts add to the appeal of this great looking airplane. Specs: Wing span: 71.5 in / 1820mm Fuselage Length: 46.5 in / 1180 mm Wing Area: 775 sq in / 50 sq dm Flying Weight: 5.6 lb / 2550 g User Requirements: Engine Required: 4c 0.52 - .60 cu  in Radio Required: 4 channels, 5 servos FEATURES: Nearly all balsa construction already pre-covered. Includes all hardware parts and instruction manual. Exact scale outline is taken from original Piper 3-view drawing The All-New English Blue J-3 Piper Cub Radio Remote Control Airplane.  Very adorable 40-60 class Piper J-3 Cub Piper Cub  which reproduces the full-scale aircraft with amazing accuracy, using precise CAD engineering and data from original airplane. All balsa construction. Aluminum alloy framed cowl. Superb realism and build quality. All major components ready for immediate assembly. Almost Redy to Fly J-3 Piper Cub 60

Zlin Z-50 Engine 46~52 - 56" Nitro Gas Radio Remote Controlled RC Airplane ARF $319 The Zlin Z-50 is one of the most famous sports planes used in aerobatics and this ARF NitroModel Z50 is built with all the aerodynamic characteristic of the real one!  It is a very special aerobatic airplane made by quality balsa wood  protected by clear coating. 90% of the model is pre-finished at the factory - you can enjoy flying this beauty with the least building time. And of course, it flies as good as it looks! Wing Span : 55.9 in / 1420mm Wing Area : 531 sq in / 34 sq dm Flying Weight : 5.5lb / 2480g Fuselage length : 43.3 in / 1100mm Engine Required : 2c : 0.46 4c: 0.52 Radio Required : 4channels 5 servos Decals included but not pre-applied.

Zero Fighter 52 - 54" Scale Nitro Gas Remote Control Airplane ARF Balsa Plane $199.95 New Page 1 Japan's Zero Fighter 50 Nitro Gas ARF Model RC Airplane The Mitsubishi A6M5 is a great scale airplane for anyone who likes scale flying. The kit includes a fiberglass fuselage and cowling. The wings are built with balsa material to form internal structure and covered. All covered surfaces are done in solartex cloth covering and then the whole airplane is airbrushed. All control surfaces have beveled leading edges and the control horn mounts are preinstalled. The wing is complete with CA hinges. The leading edge of the wing is pre-shaped. The kit includes full color decals.     Wing span: 54 in / 1380mm Wing area: 543 sq in / 35 sq dm Flying weight: 6.1lb / 2800g Fuselage length: 45 in / 1140 mm Engine Required: 2c 0.46 cu in Radio Required: 4 channels,5 servos 4c 0.63 cu in or 5 channels,6 servos Top quality wood construction with fiberglass fuselage Comes with all hardware and accessories   The Mitsubishi A6M was a light-weight naval fighter aircraft employed by the Japanese from 1940-45. More widely known by its Navy designation, Type 0 Carrier Fighter, or Zero, the plane gained a legendary reputation. A combination of excellent maneuverability and very long range made it one of the best fighters of its era.    The most effective Japanese fighter of World War II was known by many names. To the Imperial Japanese Navy, it was the Type 0 Carrier Fighter, Model 52. To the U.S. Navy pilots who fought it in the skies over the Pacific, it was the "Zeke." And to the American public it was known as the Zero. By whatever name, the Imperial Japanese Navy's Zero fighter was one of the most potent warplanes of World War II and probably the best all-around carrier-based fighter of the early 1940s. The Zero's outstanding performance stemmed primarily from the fact that it weighed only 5,500 to 6,500 pounds fully loaded. For this reason the Zero was extremely maneuverable and had a fast rate of climb. At the time of its appearance in 1940, the Zero fighter has a performance package superior to any other naval aircraft in the world. Speed, range, rate of climb, maneuverability and the ability to operate from aircraft carrier decks combined to forge a seemingly invincible weapon in the hands of the Japanese Navy. In the six months after Pearl Harbor, the Sentais (fighter Groups) equipped with the A6M so dominated the sky that the Imperial Forces had conquered over 12 million square miles. Over 10,000 Rei-sen (Zero) fighters were produced by the Japanese, and it is interesting to note that that the Zero weighted only 50% of the Corsair, one of the reasons being the lack of armor plate

C-160 Transall Nitro Gas Radio Remote Control RC ARF Aircraft R/C Airplane $395 The Transall C-160 ARF is a beautiful scale nitro gasoline aircraft. The kit includes a fiberglass fuselage and pre covered foam wings. These wings are sheeted foam. The kit has gray fiberglass cowling. All control surfaces have beveled leading edges and the control horn mounts are preinstalled. The wing is complete ready for hinging, with the servo pocket and wire channel cutout. The leading edge of the wing is pre-shaped. The kit includes full color decals.  Specs: Wingspan: 72 inches Length:  53.5 inches All built Fiberglass Fuse Recommended engine size: 20~25-2c 26-4c Wing Area: 581.25 in  Fuel Tank: 100~150cc Propeller: 9X6 - 10X6 X 2 Spinners: 1 3/4" X 2 Wheels: 50mm or 2" X 10 The Transall C-160 first flew in 1963. Production was completed in 1972, but in 1977 the program was reinstated to produce a “new generation?C-160 for France. The last of these new generation aircraft entered service in 1987. The wings are high-mounted and equally tapered outboard of the engines with blunt tips. Two turboprop engines are mounted under and extend beyond the wings?leading edges. The fuselage is long, thick, and tapered to the rear with a round, solid nose, stepped cockpit and upswept tail section. The tail flats are mid-mounted on a thinned body, equally tapered with blunt tips. The fin is tall and tapered with a blunt tip and a fairing in the leading edge. ****************NOTE*************** Engine, servos, transmitter, and other electronic items are sold separately!  This is an airplane kit only, no electronics!  Assembly required. Due to the United States Post Office's International shipping size limit, we can not ship this item outside of the United States, except Canada.

CMP F4U Corsair 120 - 76" Nitro Gas Radio Remote Controlled RC Plane ARF Airplane Warbird $349 The F4U Corsair is a real beauty. Anyone who likes the war birds is bound to love this airplane. The kit includes a fiberglass fuselage, and is painted with a blue and gray scheme.. The wings are sheeted foam, covered with Solortex cloth covering and painted. All control surfaces have beveled leading edges and the control horn mounts are preinstalled. The wing is complete with CA hinges. The leading edge of the wing is pre-shaped. Completely workable three-piece flaps are also built into this kit. This kit can be fitted with either fix landing gear or 90 degree rotating retracts. Note: See pictures below for actual paint scheme used. With an 4-stroke engine installed, this F4U Corsair plane will fly, feel, and sound amazing.     Specs: Wingspan 75.5" Fuselage Length 52" Recommended Engine Size 2c/91, 108 4c/120 Flying Weight 11 - 11.5 lbs Wing Area 892 sq in Fuel Tank 350-450 cc Radio 5-6 Ch 6-7 Servos The kit box is nicely packed, with all the major parts well packed in a light foam wrap and clear plastic bags. All balsa wood rib wing, nicely covered, rivets decals already applied, ailerons hinged and installed. Horizontal, elevators and rudder also all wood, air foiled surfaces, hinged and ready. Drop tank included and assembled.  Slots in the interior cardboard held all items tightly in place, so it will minimize damage from shipping.  Included with the kit are fuel tanks, engine mounts, wheels, hardware, pushrods, clear plastic canopy and nose cone, decal sheet, one-piece fiberglass cowls, and fixed wire landing gear plus other necessary hardware. You will need to purchase some building supplies, engines, spinners, servo extensions, and a radio. This plane is retract-ready so mechanical retracts are an interesting option to consider for this plane kit.  The quality of the materials is excellent with a one-piece fiberglass fuselage/fin straight and true. The  instruction manual has excellent-quality step-by-step drawings.  With an 4-stroke engine installed, this F4U Corsair plane will fly, feel, and sound like the legendary fighter jet from World War 2.   Engine/Radio Equipments Sold Separately.  Engine/Radio NOT included. As with all of our arf kit, this plane comes with all parts carefully wrapped in thin foam sheet and plastic bags.

CMP Messerschmitt Bf 109F (HAHN) 120 - 73" Nitro Gas Radio Remote Control Airplane (Warbird) $599.95 Messerschmitt Bf 109F (HAHN) ALMOST READY-TO-FLY RADIO CONTROLLED 2C~120~160  4C~140~180 ENGINE For people who admire scale warbirds, the CMPro BF-109 does not fail to impress. Incredible replica model of the legendary Messerschmitt as if you were looking at the real thing The kit features a gorgeous fiberglass fuselage, with decals already applied and pre-painted Wingspan 1850mm Length 1668mm Weight 5.8~5.9 kg Wing Loading 103~105 dm/2 Airfoil Naca-2415 Wing Area 56 dm/2 Radio Control 6~7 Ch 9~10 Servos purchase separately 2 Strok Engine 120~160 purchase separately 4 Strok Engine 140~180 purchase separately What the Pro say... Simply the best ARF warbird I have ever seen.   It's a whole new level for CMP.  Quality is top notch.  It goes together quickly, but keep in mind that this is a somewhat complicated airplane with lots of features, so you are not going to get it together in two evenings. The fuse is fiberglass, prepainted.  It has a tremendous amount of detail. The tailwheel is in the scale position, rather than just sitting on the rudder post, and it has a neat linkage to connect to the rudder. There are multiple scale details on the fuse, such as seperately molded fiberglass exhaust stacks, airscoops, belly pan, and a neat belly tank that uses standoffs for better appearance rather than just being stuck to the bottom of the fuse. The wings are very cool.  There are three servos per wing...flaps, ailerons, and airbrakes.  All servos mount from the bottom with the neat CMP servo mounts with fairings, and all hinging and horns are done with hinge points and horny hinge points for better appearance.  The airbrakes are very cool, one pops up from the bottom and the other from the top, using a clever provided mechanism. The plane is set up for retracts, and the retract mounts are hardwood and well-secured.  Fixed gear with scale strut covers and gear doors are also included. The spinner is amazing, about six inch diameter, of scale profile, made just for this model. The canopy frame is prepainted. The wingtips have places for lights to be inset, and clear plastic covers are included. The stabs are airfoiled, and the LE of the elevators is inset into the stabs in a scale manner

HOMELITE TEXTRON 25CC RED ROBIN RC GAS ENGINE