Genuwood Wood Craft Model Airplane
Genuwood Wood Craft Model Airplane
 |
No items matching your keywords were found.
_________________________________________________________________________________
|
|
RC Model Airplane #6 $19.95 This pre-painted scale model pilot is design for arf rc planes. It is made out of light plastic material. |
|
|
Pitts Special BiPlane ARF Electric Radio Remote Controlled Airplane $64.95 This Electric Pitts Special ARF kit is a laser cut kit with a reputation for good design, ease of construction, and excellent flying characteristics. The Pitts Special is the world's leading high performance aerobatic aircraft. In the USA the Pitts Special has won more unlimited-class aerobatic contests than any other aircraft type. Some pilots think about flying airplanes almost every day. They make imaginary flights while driving their car or even at their desk. And sometimes imagining can seem better than actually flying. But never in a Pitts! It's an experience that's almost impossible to describe. You think "turn" and you turn. You think "roll" and you roll. Turn it over and it flies just as if it were right side up. Even after several hundred flights, each flight is an exhilarating, awesome experience. So if anyone ever asks you to go for a ride, be prepared to be infected with an incurable passion. Because there is nothing, absolutely nothing that flies like a Pitts. Features: Scale ARF Electric Warbirds R/C Model Airplane Built and painted and it's a magnificent Scale model more nearly ready to fly than most others, New state of the art in highly detailed balsa skin ARF's! 4-Channel whole wood construction model! Exact scale airplane to every detail! Plane Specs: Wing Span: 31 in / 780mm Wing Area: 139 sq in / 9sq dm Flying Weight : 23 oz / 650 g Fuselage Length : 30in/765 mm Center of Gravity: 32mm from the LE on the top wing at the fuselage User Requirement & Recommendations : 4 channels radio w/ 4 mini servos Fold prep: APC: 9X5 ; 9X6SF Li-Poly : 11.1V 1300-1800mAh Brushless Motor Speed 400 Gearbox:5:1/ 6:1 Motor Speed: 400 Gearbox: 5:1 / 6:1 Out runner brushless motor 400T or 400F |
|
|
RC Airplane Scale Pilot Model #1 $19.95 This pre-painted scale model pilot is design for arf rc planes. It is made out of light plastic material. |
|
|
Military EDF Predator UCAV 101mm Electric Ducted Fan RC Airplane $119 The EDF Predator UCAV from Nitro Planes is a large fiberglass jet model with sheeted wings. It comes complete with landing gear, fiberglass canopy, missiles, and all hardware. The model can be powered by a 90mm to 101mm ( 3.5" to 4" ) EDF unit. EDF Predator UCAV 101mm Electric Ducted Fan Airplane Top Features Top quality wood construction with fiberglass fuselage Comes with all hardware and accessories Specifications Wing Span: 47.2 in / 1200mm Wing Area : 521 sq in / 33.8 sq dm Flying Weight : 6.6 lb / 3000 g Fuselage Length : 58.7 / 1490 mm Electronics Required : 4 Channels Radio Transmitter 5 Servos EDF : 101 mm / 4 in Brushless Motor : D36 x L 36 mm 2000 KV Speed Controller : 22.2 V ; 85A Li-poly Battery : 4000 mAh 25 C 22.2 V Click here for UCAV Review/Build Thread The fuselage and parts come well secured in the custom box. All the parts are covered in plastic or bagged. The control surfaces arrive attached with hinge material but need to be CA'ed in place after alignment. The fiberglass canopy is pre-finished and only needs the latch mechanism attached. The landing gear are fixed with a steerable nose wheel assembly. Two sheets of finishing decals are supplied and the 7-page manual, although sparse, provides sufficient photos and text to complete the model by an experienced assembler. Photos A closer look at the fuselage reveals the size, quality finish, construction techniques, and high level of pre-assembly. The T-nuts are already installed, and glued in place, for the gear mains and steerable nose wheel assembly. The battery and servo trays are also pre-installed. Photos Click here for UCAV Review/Build Thread |
|
|
Cheap Electric RC Airplane 236 $48.88 236 mini rc airplane is great for pilots of all ages. This remote control plane is designed to be an easy air plane to fly, which makes it great for beginners and those looking for a trainer airplane. RTF (Ready-To-Fly) radio control plane is a full function R/C plane that can go forward, left or right. Made of molded and plastic and foam making it a super tough lightweight airplane. This ducted fan RC airplane also comes with altitude and rotor speed control. Features: Altitude and Rotor Speed Control Ducted Fan Plane Ergonomic 2 CH Remote Control Controller Doubles as a Quick Charger Super Tough Lightweight Airframe Rechargeable Battery All Molded Plastic and Foam Construction Specifications: Length: 28 in. Wingspan: 24 in. Maximum Operating Speed: 30 MPH Maximum Operating Range: 460 ft. Flight Time: 5-6 min. Requires: Controller: 8 AA Batteries (Click one of the links below to see related RC products): Model: RC Airplanes Type: Electric RC Airplanes |
|
|
Zero Fighter 52 - 54" Scale Nitro Gas Remote Control Airplane ARF Balsa Plane $199.95 New Page 1 Japan's Zero Fighter 50 Nitro Gas ARF Model RC Airplane The Mitsubishi A6M5 is a great scale airplane for anyone who likes scale flying. The kit includes a fiberglass fuselage and cowling. The wings are built with balsa material to form internal structure and covered. All covered surfaces are done in solartex cloth covering and then the whole airplane is airbrushed. All control surfaces have beveled leading edges and the control horn mounts are preinstalled. The wing is complete with CA hinges. The leading edge of the wing is pre-shaped. The kit includes full color decals. Wing span: 54 in / 1380mm Wing area: 543 sq in / 35 sq dm Flying weight: 6.1lb / 2800g Fuselage length: 45 in / 1140 mm Engine Required: 2c 0.46 cu in Radio Required: 4 channels,5 servos 4c 0.63 cu in or 5 channels,6 servos Top quality wood construction with fiberglass fuselage Comes with all hardware and accessories The Mitsubishi A6M was a light-weight naval fighter aircraft employed by the Japanese from 1940-45. More widely known by its Navy designation, Type 0 Carrier Fighter, or Zero, the plane gained a legendary reputation. A combination of excellent maneuverability and very long range made it one of the best fighters of its era. The most effective Japanese fighter of World War II was known by many names. To the Imperial Japanese Navy, it was the Type 0 Carrier Fighter, Model 52. To the U.S. Navy pilots who fought it in the skies over the Pacific, it was the "Zeke." And to the American public it was known as the Zero. By whatever name, the Imperial Japanese Navy's Zero fighter was one of the most potent warplanes of World War II and probably the best all-around carrier-based fighter of the early 1940s. The Zero's outstanding performance stemmed primarily from the fact that it weighed only 5,500 to 6,500 pounds fully loaded. For this reason the Zero was extremely maneuverable and had a fast rate of climb. At the time of its appearance in 1940, the Zero fighter has a performance package superior to any other naval aircraft in the world. Speed, range, rate of climb, maneuverability and the ability to operate from aircraft carrier decks combined to forge a seemingly invincible weapon in the hands of the Japanese Navy. In the six months after Pearl Harbor, the Sentais (fighter Groups) equipped with the A6M so dominated the sky that the Imperial Forces had conquered over 12 million square miles. Over 10,000 Rei-sen (Zero) fighters were produced by the Japanese, and it is interesting to note that that the Zero weighted only 50% of the Corsair, one of the reasons being the lack of armor plate |
|
|
NitroModels Zero Fighter 52 - 54" Scale Nitro Gas Radio Remote Control Warbird Airplane $88 Japan's Zero Fighter 50 Nitro Gas ARF Model RC Airplane The Mitsubishi A6M5 is a great scale airplane for anyone who likes scale flying. The kit includes a fiberglass fuselage and cowling. The wings are built with balsa material to form internal structure and covered. All covered surfaces are done in solartex cloth covering and then the whole airplane is airbrushed. All control surfaces have beveled leading edges and the control horn mounts are preinstalled. The wing is complete with CA hinges. The leading edge of the wing is pre-shaped. The kit includes full color decals. Wing span: 54 in / 1380mm Wing area: 543 sq in / 35 sq dm Flying weight: 6.1lb / 2800g Fuselage length: 45 in / 1140 mm Engine Required: 2c 0.46 cu in Radio Required: 4 channels,5 servos 4c 0.63 cu in or 5 channels,6 servos Top quality wood construction with fiberglass fuselage Comes with all hardware and accessories The Mitsubishi A6M was a light-weight naval fighter aircraft employed by the Japanese from 1940-45. More widely known by its Navy designation, Type 0 Carrier Fighter, or Zero, the plane gained a legendary reputation. A combination of excellent maneuverability and very long range made it one of the best fighters of its era. The most effective Japanese fighter of World War II was known by many names. To the Imperial Japanese Navy, it was the Type 0 Carrier Fighter, Model 52. To the U.S. Navy pilots who fought it in the skies over the Pacific, it was the "Zeke." And to the American public it was known as the Zero. By whatever name, the Imperial Japanese Navy's Zero fighter was one of the most potent warplanes of World War II and probably the best all-around carrier-based fighter of the early 1940s. The Zero's outstanding performance stemmed primarily from the fact that it weighed only 5,500 to 6,500 pounds fully loaded. For this reason the Zero was extremely maneuverable and had a fast rate of climb. At the time of its appearance in 1940, the Zero fighter has a performance package superior to any other naval aircraft in the world. Speed, range, rate of climb, maneuverability and the ability to operate from aircraft carrier decks combined to forge a seemingly invincible weapon in the hands of the Japanese Navy. In the six months after Pearl Harbor, the Sentais (fighter Groups) equipped with the A6M so dominated the sky that the Imperial Forces had conquered over 12 million square miles. Over 10,000 Rei-sen (Zero) fighters were produced by the Japanese, and it is interesting to note that that the Zero weighted only 50% of the Corsair, one of the reasons being the lack of armor plate protection for |
|
|
P40 Warhawk Balsa Wood Nitro Gas RC Airplane ARF $104.47 Remote control P40 Warhawk gas airplane with a factory-assembled balsa main fuselage expertly covered in lightweight film. Just apply the shark mouth and other decals for the finishing touches. Special graphic decals are already applied. The glow fuel resistant high-quality single color film is expertly applied in layers to produce the camouflage patterns and is also resistant to creasing from large variations in temperature and humidity. The detailed camouflage pattern looks extremely complicated but the result is a magnificent finish that you will admire as soon as you set your eyes on it. And the Warhawk also delivers its excellent quality at a great value price! Relive the excitement of flying one of the most famous warplanes ever to prowl the skies with this highly detailed RC airplane reproduction! Features: Top Quality Balsa and Plywood Construction Premium Hand Iron-On Covering Film Brushless Speed Controller Fuel Proof Pre-Painted Fiberglass Specifications: Wing Span: 33.8in/860mm Wing Area: 206sq in/13.3sq dm Flying Weight: 1.0lbs/460g Fuselage Length: 29in/740mm Brushless Speed Controller: 15-18A Requires (Not Included) : Radio: 4 Channels, 3 Servos Motor: 400 Motor |
|
|
Electric RC Plane Yellowbird AirPlane RTF $41.97 The remote control airplane is a package of flying fun. Not only is everything you need included (except AA batteries for the transmitter) but the assembled model is a beautifully docile flyer. It uses twin motors for power and steering. At full power, both motors run at the same speed -- when you input a turn, one of the motors slows down. No moving control surfaces, no trimming; what could be easier? Even people who have never before held a transmitter can fly these planes. Have a blast flying the plane around the park or field. The Airplane is packed with high-tech electronics and engineering innovation yet is quite easy to assemble and to get into the air. The Airplane is a great all-around R/C plane that is fun to use by new flyers as well as experts alike. Rechargeable battery included. Features Motor-driven remote-controlled glider features a shock-resisting plane nose design made by plastic injection molding process. Elegant in appearance and excellent in the ability to resist air crashes. It boasts of thrice-folded wings with a big span ratio, V-shaped tail wings and good performance in glide and circular motion. It can dwell in the air for over 15 minutes. Fly as high as 300 meters or above. (Click one of the links below to see related RC products): Model: RC Airplanes Type: Electric RC Airplanes |
|
|
Scale RC Airplane Pilot #2 $19.95 This pre-painted scale model pilot is design for arf rc planes. It is made out of light plastic material. |
|
|
New 2009 CMPro U.S. Navy T-34 Mentor 40 - 58" Nitro Gas Fiberglass Radio Controlled Airplane w/ Retracts! ARF-Version $134.95 RADIO CONTROLLED 2C~40~46 4C~52~63 ENGINE POWERED SCALE AIRPLANE The new CMPro T-34 is a great choice for scale model enthusiasts. Fuselage, wings and tails are made from quality balsawood, all come factory-covered under the new covering film with all the scale details printed on. Its large dihedral also enhances steady approaches and makes the T-34 a great model to fly with. Wingspan 1480mm (58.27in) Length 1160mm (45.67in) Weight 2.65~2.8 kg Wing Loading 74~79 dm/2 Airfoil Naca 2415 Wing Area 35.5 dm/2 Radio Control 5Ch 6~7Servos purchase separately 2 Strok Engine 40~46 purchase separately 4 Strok Engine 52~63 purchase separately Glass fiber cowl, spray painted in a gorgeous and scale color scheme. Fuselage is constructed by laser-cut balsa wood to ensure accuracy and weightlessness. The balsa ribbed wings are factory covered with all the scale details already printed on. The model delivers an incredible attention to detail and comes virtually ready to fly. Tail and rudder also come factory covered, ready and easy to install. Pre-painted PVC canopy. (Pilot figures to be purchased separately). Featuring pre-fitted mechanical retracting undercarriages. The package provides almost everything you need to get to a flying standard except adhesives and radios. |
|
|
Blue Habciht 2600mm Remote Control Model Airplane Glider ARF $399.95 Habicht ARF Glider Spray painted fiberglass fuselage. Ready covered built-up wings and tails. Available in two color schemes, red & whie or blue & white. Specifcations Wingspan.....................2600mm Weight.........................2900~3100g Lenght.........................1245mm Wing Area....................55 dm2 Wing Loading...............53~56g/dm2 Airfoil..........................Clark Y 61 Modify Radio..........................3~4 Channel 4~6 Servos |
|
|
Red Habciht 2600mm Remote Control Model Airplane Glider ARF $499.95 Habicht ARF Glider Spray painted fiberglass fuselage. Ready covered built-up wings and tails. Available in two color schemes, red & whie or blue & white. Specifcations Wingspan.....................2600mm Weight.........................2900~3100g Lenght.........................1245mm Wing Area....................55 dm2 Wing Loading...............53~56g/dm2 Airfoil..........................Clark Y 61 Modify Radio..........................3~4 Channel 4~6 Servos |
|
|
Super Sale! CMP Model P40 Warhawk 140 - 73 " ARF Nitro Gas Radio Remote Controlled "Tiger Shark" Airplane RC Plane $199 This is so far our highest quality arf plane kit, well priced and almost-ready-to-fly! The P40 Warhawk has a fiberglass fuselage and cowl painted in vague colors. The rib wings are covered with Solartex and airbrushed to match the color of the whole aircraft. The wood that makes up both the wings and the fuselage are all laser cut. The high precision of fiberglass and fine painting work make this kit an extremely realistic aircraft. It is a perfect combination between scale looks and excellent flying performance. The kit comes with a full color decal sheet, wheels and a fuel tank. This war bird is a must fly! Wingspan 1850mm Length 1570mm Weight 4.88~4.95 kg Wing Loading 81~83 dm/2 Airfoil Naca 0014 Wing Area 60 dm/2 Radio Control 4~5 Ch 5~6 Servos purchase separately 2 Strok Engine 108~120 purchase separately 4 Strok Engine 140 purchase separately *RETRACT NOTE* The retract bays are built into the wing from the factory, so the retracts will drop right in. Wing Span: 73" Weight: 10.75lb Length: 62" Wing Area: 930sq.in Wing Loading: 26.64oz./sq.ft. Engine Required: 4c 140 Radio 4~5 Channel 5~6 Servos The kit box is nice packed, with all the major parts well packed in a light foam wrap and clear plastic bags. Slots in the interior cardboard held all items tightly in place, so it will produce no damage from shipping. Included with the kit are fuel tanks, engine mounts, wheels, hardware, pushrods, clear plastic canopy and nose cone, decal sheet, one-piece fiberglass cowls, and fixed wire landing gear plus other necessary hardware. You will need to purchase some building supplies, engines, spinners, servo extensions, and a radio. Mechanical retracts are an interesting option to consider for this plane kit. The quality of the materials is excellent with a one-piece fiberglass fuselage/fin straight and true. The instruction manual has excellent-quality step-by-step drawings. With an 4-stroke engine installed, this P40 Plane will fly, feel, and sound like the legendary Tiger Shark from World War 2. This fierce P-40 Warhawk comes with quality hardware including the spinner. *Propeller to be purchased separately* Decals are ready applied and protected by clear coat. The model is thus very durable and easy to build. The kit comes with fixed landing gear and optional twist and turn retracts fitting. &n |
|
|
Airplane ex-window $2 Airplane ex-window |
|
|
Texan AT-6: Airplane Accessories $5 Texan AT-6: Airplane Accessories |
|
|
R/C Model Pilot #6 $7.5 These model airplane pilots are designed for CMP's range of ARFs. Total of eight different models which are all pre-painted and no further job is needed! |
|
|
R/C Model Pilot #7 $7.5 These model airplane pilots are designed for CMP's range of ARFs. Total of eight different models which are all pre-painted and no further job is needed! |
|
|
|
March 21st, 2010 in
Model Airplanes