Balsa Model Airplane
Balsa Model Airplane
 |
 RC Model Airplane super balsa Glue SIG Thick CA 2oz  US $6.99
|
 :) SUPER SNIFFER BALSA MODEL AIRPLANE KIT US $70.00
|
 :) Pup II Balsa Model Airplane Kit US $34.50
|
 :) DH C-2 BEAVER BALSA MODEL AIRPLANE KIT US $40.95
|
 :) SKYRAIDER BALSA MODEL AIRPLANE KIT US $13.00
|
 :) CESSNA 150 BALSA MODEL AIRPLANE KIT US $24.00
|
 :) FOCKE-WULF FW-190 BALSA MODEL AIRPLANE KIT US $15.00
|
 :)*PIPER SUPER CUB BALSA MODEL AIRPLANE KIT* US $14.00
|
 JABBERWOCK 31" MODEL AIRPLANE PLAN RUBBER BALSA OT US $4.99
|
 :) CHIPMUNK BALSA MODEL AIRPLANE KIT US $13.00
|
_________________________________________________________________________________
 |
R/C Soaring ... From the Ground Up! Sale Price: $24.95  |
|
R/C Soaring...From the Ground Up! is intended for the NEW R/C Soaring enthusiast! It takes you through the construction of a typical 2 Meter wooden sailplane... with lots of hints, tips, and ideas along the way... |
 |
Balsa Sky Streak Rubber Band Powered Glider Guillows Sale Price: $1.95 |
|
A staple in the Guillows Line!! Most of the kits in this series comes with 5 to 10 balsa parts that fit together with no glueing. Some come as noted with propeller and rubber band powered. Great fun for flying around the yard or in the park... |
 |
Balsa Jetfire Glider Guillows Sale Price: $0.99 |
|
A staple in the Guillows Line!! Most of the kits in this series comes with 5 to 10 balsa parts that fit together with no glueing. Some come as noted with propeller and rubber band powered. Great fun for flying around the yard or in the park... |
 |
Jet Stream Rubber Band Powered Glider Guillows Sale Price: $3.13 |
|
A staple in the Guillows Line!! Most of the kits in this series comes with 5 to 10 balsa parts that fit together with no glueing. Some come as noted with propeller and rubber band powered. Great fun for flying around the yard or in the park... |
|
Making Vintage Aircraft in Wood Sale Price: $17.57 |
|
|
A collection of simple-to-make aerial classics: 37 in all, with to easy-to-follow directions and close-up step-by-step photographs and plans. Choose from the lighter-than-air L'Entreprenant balloon, the F-100 Supersabre, the Wright Flyer from the dawn of flight, the Sopwith Camel or Fokker Triplane from World War 1, the German Stuka Dive-bomber, P-38 Lightning or classic B-17 Flying Fortress from World War 2 - and a whole host of others. |
|
|
Zero Fighter 52 - 54" Scale Nitro Gas Remote Control Airplane ARF Balsa Plane $199.95 New Page 1 Japan's Zero Fighter 50 Nitro Gas ARF Model RC Airplane The Mitsubishi A6M5 is a great scale airplane for anyone who likes scale flying. The kit includes a fiberglass fuselage and cowling. The wings are built with balsa material to form internal structure and covered. All covered surfaces are done in solartex cloth covering and then the whole airplane is airbrushed. All control surfaces have beveled leading edges and the control horn mounts are preinstalled. The wing is complete with CA hinges. The leading edge of the wing is pre-shaped. The kit includes full color decals. Wing span: 54 in / 1380mm Wing area: 543 sq in / 35 sq dm Flying weight: 6.1lb / 2800g Fuselage length: 45 in / 1140 mm Engine Required: 2c 0.46 cu in Radio Required: 4 channels,5 servos 4c 0.63 cu in or 5 channels,6 servos Top quality wood construction with fiberglass fuselage Comes with all hardware and accessories The Mitsubishi A6M was a light-weight naval fighter aircraft employed by the Japanese from 1940-45. More widely known by its Navy designation, Type 0 Carrier Fighter, or Zero, the plane gained a legendary reputation. A combination of excellent maneuverability and very long range made it one of the best fighters of its era. The most effective Japanese fighter of World War II was known by many names. To the Imperial Japanese Navy, it was the Type 0 Carrier Fighter, Model 52. To the U.S. Navy pilots who fought it in the skies over the Pacific, it was the "Zeke." And to the American public it was known as the Zero. By whatever name, the Imperial Japanese Navy's Zero fighter was one of the most potent warplanes of World War II and probably the best all-around carrier-based fighter of the early 1940s. The Zero's outstanding performance stemmed primarily from the fact that it weighed only 5,500 to 6,500 pounds fully loaded. For this reason the Zero was extremely maneuverable and had a fast rate of climb. At the time of its appearance in 1940, the Zero fighter has a performance package superior to any other naval aircraft in the world. Speed, range, rate of climb, maneuverability and the ability to operate from aircraft carrier decks combined to forge a seemingly invincible weapon in the hands of the Japanese Navy. In the six months after Pearl Harbor, the Sentais (fighter Groups) equipped with the A6M so dominated the sky that the Imperial Forces had conquered over 12 million square miles. Over 10,000 Rei-sen (Zero) fighters were produced by the Japanese, and it is interesting to note that that the Zero weighted only 50% of the Corsair, one of the reasons being the lack of armor plate |
|
|
P40 Warhawk Balsa Wood Nitro Gas RC Airplane ARF $104.47 Remote control P40 Warhawk gas airplane with a factory-assembled balsa main fuselage expertly covered in lightweight film. Just apply the shark mouth and other decals for the finishing touches. Special graphic decals are already applied. The glow fuel resistant high-quality single color film is expertly applied in layers to produce the camouflage patterns and is also resistant to creasing from large variations in temperature and humidity. The detailed camouflage pattern looks extremely complicated but the result is a magnificent finish that you will admire as soon as you set your eyes on it. And the Warhawk also delivers its excellent quality at a great value price! Relive the excitement of flying one of the most famous warplanes ever to prowl the skies with this highly detailed RC airplane reproduction! Features: Top Quality Balsa and Plywood Construction Premium Hand Iron-On Covering Film Brushless Speed Controller Fuel Proof Pre-Painted Fiberglass Specifications: Wing Span: 33.8in/860mm Wing Area: 206sq in/13.3sq dm Flying Weight: 1.0lbs/460g Fuselage Length: 29in/740mm Brushless Speed Controller: 15-18A Requires (Not Included) : Radio: 4 Channels, 3 Servos Motor: 400 Motor |
|
|
T-34 MENTOR 60 Almost Ready To Fly (ARF) Gas Rc Airplane $349.99 T-34 MENTOR 60 Almost-Ready-To-Fly Nitro Gas RC Airplane! This airplane is huge. All you need is an engine and a radio. Engine and Radio are not included Features Semi-scale aerobatics trainer Top quality balsa and plywood construction Covered with iron-on covering film Built-up wing and two pre-painted pilot figures Special races have been organized based on this model Perfect for beginners who have graduated from shoulder wing trainer Comes with all hardware and accessories Specifications Wing Span: 65.2 in / 1650 mm Wing Area: 769 sq in / 49.6 sq dm Flying Weight: 7.9 lbs / 3600 g Fuselage Length: 54.0 in / 1370 mm Engine Required: 2c 0.60 cu in 4c 0.91 cu in Radio Required: 5 channels, 6 servos |
|
|
RC Model Airplane #6 $19.95 This pre-painted scale model pilot is design for arf rc planes. It is made out of light plastic material. |
|
|
Gas Rc Airplane Trainer $199.99 Brand New, Almost-Ready-To-Fly Nitro Gas R/C Airplane !!! The most popular Nitro Trainer 20 Airplane. Engine and Radio are not included Features Scale aerobatics models airplane Top quality balsa and plywood construction Covered with iron-on covering film 3D transparent template to assist engine installation Comes with all hardware and accessories Specifications Wing Span: 52.0 in / 1320 mm Wing Area: 446 sq in / 28.8 sq dm Flying Weight: 3.5 lbs / 1600 g Fuselage Length: 38.6 in / 980 mm Engine Required: 2c 0.25 cu in Radio Required: 4 channels, 4 servos |
|
|
Zlin Z-50 Engine 46~52 - 56" Nitro Gas Radio Remote Controlled RC Airplane ARF $319 The Zlin Z-50 is one of the most famous sports planes used in aerobatics and this ARF NitroModel Z50 is built with all the aerodynamic characteristic of the real one! It is a very special aerobatic airplane made by quality balsa wood protected by clear coating. 90% of the model is pre-finished at the factory - you can enjoy flying this beauty with the least building time. And of course, it flies as good as it looks! Wing Span : 55.9 in / 1420mm Wing Area : 531 sq in / 34 sq dm Flying Weight : 5.5lb / 2480g Fuselage length : 43.3 in / 1100mm Engine Required : 2c : 0.46 4c: 0.52 Radio Required : 4channels 5 servos Decals included but not pre-applied. |
|
|
New English Blue J-3 Piper Cub 60 - 71" Nitro Gas Radio Remote Control Airplane Almost-Ready-to-Fly ARF $249 Super J-3 Piper Cub 60 - 71" ARF Scale Nitro Gas Radio Remote Control Airplane! A favorite with scale model builders, the Cub is now available with an unique "computer design and drawn" engineering, resulting in outstanding scale accuracy and easy kit assembly. This All-New Nitro Gas RC Super Cub ARF Blue J3 Piper Cub 60 makes for a perfect afternoon at the park! Made with lightweight, yet strong balsa construction, the stable flight characteristics make this a perfect airplane for the ARF fans, scale wing struts add to the appeal of this great looking airplane. Specs: Wing span: 71.5 in / 1820mm Fuselage Length: 46.5 in / 1180 mm Wing Area: 775 sq in / 50 sq dm Flying Weight: 5.6 lb / 2550 g User Requirements: Engine Required: 4c 0.52 - .60 cu in Radio Required: 4 channels, 5 servos FEATURES: Nearly all balsa construction already pre-covered. Includes all hardware parts and instruction manual. Exact scale outline is taken from original Piper 3-view drawing The All-New English Blue J-3 Piper Cub Radio Remote Control Airplane. Very adorable 40-60 class Piper J-3 Cub Piper Cub which reproduces the full-scale aircraft with amazing accuracy, using precise CAD engineering and data from original airplane. All balsa construction. Aluminum alloy framed cowl. Superb realism and build quality. All major components ready for immediate assembly. Almost Redy to Fly J-3 Piper Cub 60 |
|
|
CMPro Midget Mustang 60/70 - 55" Nitro Powered Remote Control Airplane ARF $288 2C-60 4C-70 ENGINE POWER SCALE AIRPLANE The CMPro Midget Mustang features a nicely painted fiberglass fuselage with decals ready applied and clear coated. The wings and control surfaces are made from quality balsawood to ensure weightlessness. A great flying machine with stunning look which you can?t miss! Wingspan 1400mm Length 1250mm Weight 3.4~3.5 kg Wing Loading 87~90 dm/2 Airfoil Naca 0012 Wing Area 39 dm/2 Radio Control 4 Ch 5 Servos purchase separately 2 Strok Engine 60 purchase separately 4 Strok Engine 70 purchase separately The color scheme is dazzling and helps great with orientation. Features include fiberglass cowl, undercarriage, and a scale plastic spinner. The internal finish is neat and clean, ready to accommodate servos and etc. Full aileron design for a more responsive and manoeuvrable model. Balsa constructed wings and other control surfaces, comes factory covered. 90% factory built to ensure the minimum building time is needed. |
|
|
RC Airplane Scale Pilot Model #1 $19.95 This pre-painted scale model pilot is design for arf rc planes. It is made out of light plastic material. |
|
|
NitroModels Zero Fighter 52 - 54" Scale Nitro Gas Radio Remote Control Warbird Airplane $99 Japan's Zero Fighter 50 Nitro Gas ARF Model RC Airplane The Mitsubishi A6M5 is a great scale airplane for anyone who likes scale flying. The kit includes a fiberglass fuselage and cowling. The wings are built with balsa material to form internal structure and covered. All covered surfaces are done in solartex cloth covering and then the whole airplane is airbrushed. All control surfaces have beveled leading edges and the control horn mounts are preinstalled. The wing is complete with CA hinges. The leading edge of the wing is pre-shaped. The kit includes full color decals. Wing span: 54 in / 1380mm Wing area: 543 sq in / 35 sq dm Flying weight: 6.1lb / 2800g Fuselage length: 45 in / 1140 mm Engine Required: 2c 0.46 cu in Radio Required: 4 channels,5 servos 4c 0.63 cu in or 5 channels,6 servos Top quality wood construction with fiberglass fuselage Comes with all hardware and accessories The Mitsubishi A6M was a light-weight naval fighter aircraft employed by the Japanese from 1940-45. More widely known by its Navy designation, Type 0 Carrier Fighter, or Zero, the plane gained a legendary reputation. A combination of excellent maneuverability and very long range made it one of the best fighters of its era. The most effective Japanese fighter of World War II was known by many names. To the Imperial Japanese Navy, it was the Type 0 Carrier Fighter, Model 52. To the U.S. Navy pilots who fought it in the skies over the Pacific, it was the "Zeke." And to the American public it was known as the Zero. By whatever name, the Imperial Japanese Navy's Zero fighter was one of the most potent warplanes of World War II and probably the best all-around carrier-based fighter of the early 1940s. The Zero's outstanding performance stemmed primarily from the fact that it weighed only 5,500 to 6,500 pounds fully loaded. For this reason the Zero was extremely maneuverable and had a fast rate of climb. At the time of its appearance in 1940, the Zero fighter has a performance package superior to any other naval aircraft in the world. Speed, range, rate of climb, maneuverability and the ability to operate from aircraft carrier decks combined to forge a seemingly invincible weapon in the hands of the Japanese Navy. In the six months after Pearl Harbor, the Sentais (fighter Groups) equipped with the A6M so dominated the sky that the Imperial Forces had conquered over 12 million square miles. Over 10,000 Rei-sen (Zero) fighters were produced by the Japanese, and it is interesting to note that that the Zero weighted only 50% of the Corsair, one of the reasons being the lack of armor plate protection for |
|
|
NitroModel Low-Wing Super Aerobatic Trainer 60 - 71" Nitro Gas Radio Remote Controlled Airplane $149.95 Learning to fly a radio control airplane is one of the most exciting and rewarding challenges you can undertake. It's a hobby you can enjoy for a lifetime and will open doors to new experiences and friends you might have never known otherwise. Brand New! Aerobatic RC Flying Trainer Aircraft! Lowest Price for Beginners and now NitroModels is offering CLUB DISCOUNT when buying 2 or more! Trainer 60 Low Wing Brochure ARF Trainer Low Wing 60, an up to date ARF trainer, with great design , and is the best, strongest new design This plane is a well designed 60 size trainer for beginner pilots. It has sturdy all balsa/ply wood construction and is very stable in flight. You can fly this plane after 1-2 hours of installation. Now available at a very attractive introductory price. We sell these planes factory direct and individuals as well as hobby shops are welcome to contact us. Low wing aerobatics trainer. Top quality balsa and plywood construction. Premium hand iron-on covering film. Stable but maneuverable characteristics. Comes with all hardware and accessories. Perfect for intermediate flyers. Notable features of this plane: Bigger wing and bigger wing area helps give a more stable flight. * 1 degree wing dihedral gives a good balance flight stability and agility. * All the hardware are included (servo wire, fuel tank, wheel/landing gear, etc). You only need to separately purchase the nitro engine and radio system. * Designed as a sturdy, inexpensive trainer plane that will help you get started with R/C flight. This NitroModel Low-Wing Super Trainer 60 is an ideal second model. One of the best selling sports models for rc flyers. When you've mastered that 'trainer' you'll need to move on, so look no further than the NitroModel Low-Wing Super Trainer 60! Not only is the NitroModel Low-Wing Super Trainer 60 an ideal second model, it has enough new challenges in terms of flight performance to suit sports modelers as well. The NitroModel Low-Wing Super Trainer 60 has often been compared to pure 'Aerobatic' models in terms of looks, but then been found to offer the performance to match. Specifications Wing span: 71 in / 1800mm Wing area: 900sq in / 58.1 sq dm Flying weight: 7.2lb / 3300g Fuselage length: 55 in / 1420mm Airfoil: Flat Bottom Requirements Engine Required: 2c 0.61 cu in Radio Required: 4channels, 4servos Low-Wing 60 Specialty Planes of a low wing design are better suited to aerobatics! |
|
|
New 2009 CMPro U.S. Navy T-34 Mentor 40 - 58" Nitro Gas Fiberglass Radio Controlled Airplane w/ Retracts! ARF-Version $399.95 RADIO CONTROLLED 2C~40~46 4C~52~63 ENGINE POWERED SCALE AIRPLANE The new CMPro T-34 is a great choice for scale model enthusiasts. Fuselage, wings and tails are made from quality balsawood, all come factory-covered under the new covering film with all the scale details printed on. Its large dihedral also enhances steady approaches and makes the T-34 a great model to fly with. Wingspan 1480mm (58.27in) Length 1160mm (45.67in) Weight 2.65~2.8 kg Wing Loading 74~79 dm/2 Airfoil Naca 2415 Wing Area 35.5 dm/2 Radio Control 5Ch 6~7Servos purchase separately 2 Strok Engine 40~46 purchase separately 4 Strok Engine 52~63 purchase separately Glass fiber cowl, spray painted in a gorgeous and scale color scheme. Fuselage is constructed by laser-cut balsa wood to ensure accuracy and weightlessness. The balsa ribbed wings are factory covered with all the scale details already printed on. The model delivers an incredible attention to detail and comes virtually ready to fly. Tail and rudder also come factory covered, ready and easy to install. Pre-painted PVC canopy. (Pilot figures to be purchased separately). Featuring pre-fitted mechanical retracting undercarriages. The package provides almost everything you need to get to a flying standard except adhesives and radios. |
|
|
Yak 54 2C 46~50 - 52" Nitro Gas Radio Remote Controlled RC Airplane ARF $399.95 2c 46~50 4c 52~63 ENGINE POWERED AEROBATIC AIRCRAFT This beautiful aerobatic aircraft features a fiberglass fuselage and balsa rib wings. Pre covered in a colorful and attractive design which is sure to draw attention. If you are looking for an outstanding aerobatic flyer, small and convenient to transport, this model will really get the adrenaline running. Wingspan 1320mm Length 1150mm Weight 2.7~2.8 kg Wing Loading 80~84 dm/2 Airfoil Naca 0014 Wing Area 33 dm/2 Radio Control 4 Ch 5 Servos purchase separately 2 Strok Engine 46~50 purchase separately 4 Strok Engine 52~63 purchase separately All components come pre decorated. Full color decals are included which you can personalize the design. The carbon fiber landing gear is strong and durable. |
|
|
Cheap Electric RC Airplane 236 $48.88 236 mini rc airplane is great for pilots of all ages. This remote control plane is designed to be an easy air plane to fly, which makes it great for beginners and those looking for a trainer airplane. RTF (Ready-To-Fly) radio control plane is a full function R/C plane that can go forward, left or right. Made of molded and plastic and foam making it a super tough lightweight airplane. This ducted fan RC airplane also comes with altitude and rotor speed control. Features: Altitude and Rotor Speed Control Ducted Fan Plane Ergonomic 2 CH Remote Control Controller Doubles as a Quick Charger Super Tough Lightweight Airframe Rechargeable Battery All Molded Plastic and Foam Construction Specifications: Length: 28 in. Wingspan: 24 in. Maximum Operating Speed: 30 MPH Maximum Operating Range: 460 ft. Flight Time: 5-6 min. Requires: Controller: 8 AA Batteries (Click one of the links below to see related RC products): Model: RC Airplanes Type: Electric RC Airplanes |
|
|
4-CHANNEL EP-Powered AT-6 Texan RC AIRPLANE Model Kit (Unassembled) $49.95 Features: 4 Channel Remote Control Airplane Full aerobatic characteristics; inside loops, outside loops, axial rolls, inverted flight, knife edge, stall turns, hammerheads, and spins are possible Constructed with Super Tough, lightweight EPO material! Perfect appearance and emulation (Scale appearance, great attention has been given to details) True Classic Trainer of All Time! Decorative Waterslide Decals! Easy to Build & Endless Fun to Fly! Perfect Low-Wing Trainer! Rudder helps steer plane on ground on its scale landing gear for easy take off Shock Resistant Reinforced fuselage and Strong Wings Can Take Off From Ground or Hand Launched Ground Take-Off can be performed easily Huge Wing size, Excellent Flight Performance Super easy and super stable electric powered scale R/C park flyer for beginner or middle-level users Stable inverted flight Super stable for beginner, Super low speed for safety, Super low altitude for fun Fabricated by accurate molds with high fidelity of real airplane Excellent stability and aerobatic capability Detailed Body Structure High roll rate Super low speed for safety, Super low altitude for fun Crash Resistant Construction Easy to Fly, Easy to Control, Super stable for beginner Slow Speed Flying Capable, Good for Beginner Suitable for both beginners and experienced pilots Specifications: Wingspan: 900mm (35.4") Length: 680mm (26.7") Flying Weight: 480g (16.9 oz) Requirements: Drive System: 370 carbon brushed motor Servo: 3X 9g high speed micro servos ESC: 20A speed controller Battery: 9.6V 650mah Ni-MH Control system: 4 CH Multifunctional Radio Transmitter and Receiver Included: Airplane Kit Unassembled Screw Driver 4 Propellers English Manual |
|
|
Fashion 50 Almost Ready To Fly (ARF) Gas Rc Airplane $319.95 Fashion 50 Almost Ready To Fly (ARF) Gas Rc Airplane. Need a really big rc plane? This one is for you. Engine and Radio are not included Features Scale aerobatics models airplane Top quality balsa and plywood construction Covered with iron-on covering film 3D transparent template to assist engine installation Comes with all hardware and accessories Specifications Wing Span: 54.7 in / 1390 mm Wing Area: 558 sq in / 36 sq dm Flying Weight: 5.9 lbs / 2700 g Fuselage Length: 54.7 in / 1390 mm Engine Required: 2c 0.40 cu in 4c 0.52 cu in Radio Required: 4 channels, 5 servos |
|
|
CAP 232-46 Gas Rc Airplane`Comes Almost Ready To Fly (ARF) $148.88 CAP 232-46 Almost Ready To Fly (ARF) Gas Rc Airplane Now In Stock. Engine and Radio are not included Features Scale aerobatics models airplane Top quality balsa and plywood construction Covered with iron-on covering film Fuel proof decals and factory painted pilot figure 3D transparent template to assist engine installation Comes with all hardware and accessories Specifications Wing Span: 55 in / 1400 mm Wing Area: 553 sq in / 35.7 sq dm Flying Weight: 6.0 lbs / 2750 g Fuselage Length: 49.2 in / 1250 mm Engine Required: 2c 0.46 cu in 4c 0.52 cu in Radio Required: 4 channels, 5 servos |
|
|
New NitroModels CMP F4U Corsair 50 - 58" Nitro Gas Radio Remote Controlled Almost-Ready to Fly RC Airplane Warbird Plane $329 As all NitroModels CMP this F4U Corsair 50 ARF NITRO Gas Plane kit comes with all parts nicely wrapped in thin foam and plastic bags. The kit box is truly nice packed, with all the major parts well packed in a light foam wrap and clear plastic bags. All balsa wood rib wing, nicely covered, rivets decals already applied, ailerons hinged and installed. Horizontal, elevators and rudder also all wood, air foiled surfaces, hinged and ready. Drop tank included and assembled. Slots in the interior cardboard held all items tightly in place, so it will minimize damage from shipping. Included with the kit are fuel tanks, engine mounts, wheels, hardware, pushrods, clear plastic canopy and nose cone, decal sheet, one-piece fiberglass cowls, and fixed wire landing gear plus other necessary hardware. You will need to purchase some building supplies, engines, spinners, servo extensions, and a radio. This plane is retract-ready so mechanical retracts are an interesting option to consider for this plane kit. The quality of the materials is excellent with a one-piece fiberglass fuselage/fin straight and true. The instruction manual has excellent-quality step-by-step drawings. With an 4-stroke engine installed, this F4U Corsair plane will fly, feel, and sound like the legendary fighter jet from World War 2. The F4U Corsair 50 ARF features a fiberglass moulded fuselage and balsa ribbed wings. The whole model is matt spray paint finished with decals already applied. Wing panels are made of quality balsa wood to result a light model. This kit will not fail to impress in the air or on the ground. The F4U Corsair features a fiberglass fuselage and painted wing. The high precision fiberglass construction and the whole ?matt? look make this kit an extremely realistic model. The kit also comes with a professionally painted fiberglass cowl and a fixed undercarriage, with optional rotating retracts fitting. The CMPro Corsair is an ideal choice for those who are looking for a scale warbird with outstanding flying performance. Wingspan 1480mm Length 1100mm Weight 27.5~28.5 kg Wing Loading 63~69 dm/2 Airfoil Naca 2415 Wing Area 41 dm/2 Radio Control 4~5 Ch 5~6 Servos purchase separately 2 Strok Engine 40~50 purchase separately 4 Strok Engine 52~63 purchase separately *RETRACT NOTE* The retract bays are built into the  |
|
|
DeHavilland Mosquito Twin 25~32 - 73" Engine Powered Radio Remote Controlled Nitro Gas Scale Airplane ARF $489 CMP DeHavviland Mosquito 25~32 - 73" Nitro Gas Radio Remote Controlled Twin Engine Scale RC Warbird Airplane. The 73" Mosquito ARF is a great scale airplane for anyone who likes scale flying. The kit includes a fiberglass fuselage, center section, and cowling done in matching paint. The wings are sheeted foam, covered with solartex, painted to match. All control surfaces have beveled leading edges and the control horn mounts are preinstalled. The kit includes full color decals. The kit box is large, with all the major parts well packed in a light foam wrap and clear plastic bags. Slots in the interior cardboard held all items tightly in place, producing a sample of this product for review that will produce no damage from shipping. Included with the kit are 8-ounce fuel tanks, engine mounts, wheels, hardware, pushrods, clear plastic canopy and nose cone, decal sheet, one-piece fiberglass cowls, and fixed wire landing gear. You will need to purchase some building supplies, engines, spinners, servo extensions, and a radio. Mechanical retracts are an interesting option to consider. The quality of the materials is excellent with a one-piece fiberglass fuselage/fin straight and true. The 11-page instruction manual has excellent-quality step-by-step drawings. Pluses: ? Well engineered?all parts fit together nicely. ? Handsome painted finish and full-color decal sheet. Details and Recommendations: Type: Semiscale ARF Pilot Skill Level: Intermediate Wingspan: 73 inches Wing area: 1,286.5 square inches Length: 52.5 inches Weight: 11-11.5 pounds Wing loading: 20.6 ounces per square inch Engine: .25-.32 (two-stroke) or .26-.30 (four-stroke) Radio: Five- to six-channel transmitter, seven to nine servos (rudder, elevator, flaps, one for each aileron, one for each throttle, one for each optional retract) Construction: Molded fiberglass fuselage, tail sections, wing center-section, and engine nacelles with light-plywood support, balsa-and-plywood wing panels and sections Covering/finish: Three-color flat-finished camouflage paint over fiberglass, film covered wings and tail Options: Retractable landing gear (Not Included) Construction: Model assembly begins with attaching the ailerons to the wings using cloth-style hinges provided in the kit. The engine nacelle splits the flaps on each wing panel, which are connected with a U-shaped joiner wire. The flaps are attached after the wing sections are joined, to make their alignment easier to match. The wing is composed of a center-section and two outer panels. The outer panels and control surfaces are built-up wooden structures, and the center-section is a fiberglass shell with a plywood skeleton. Two aluminum tubes?measuring 87/16 inches in length and 3/4 inch in diameter?insta |
|
|
Silver P-51 Mustang 46 Gas RC Airplane Almost Ready To Fly (ARF) $148.88 Silver P-51 Mustang 46 Gas Rc Airplane Almost Ready To Fly (ARF) Now In Silver. You asked for this rc airplane so we got it for you! Engine and Radio are not included Features Pre-Installed Retracts Fiberglass Scoop with balsa frame Constructed precisely from top quality balsa Trimmed and painted cowling by fuel proof paint Premium hand iron-on covering film Fuel proof decals and factory painted pilot figure 3D transparent template to assist engine installation Comes with all hardware and accessories Specifications Wing Span: 57.5 in / 1460 mm Wing Area: 601 sq in / 38.8 sq dm Flying Weight: 6.0 lbs / 2750 g Fuselage Length: 49.6 in / 1260 mm Engine Required: 2c 0.46 cu in 4c 0.52 cu in Radio Required: 5 channels, 6 servos |
|
|
|
Balsa USA Nieuport 28 test/trim flights
February 23rd, 2010 in
Model Airplanes | tags: airplane, balsa, balsa model airplane by guillows, balsa model airplane kits, balsa model airplane plans, balsa model airplane supplies, balsa model airplanes, balsa model airplanes from dumas models, diy, model, plans, rc